026 Pro Stihl Chainsaw Bar Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your bar oiler stop working. Not only can it be dangerous, but it can also lead to premature wear and tear on your saw. If your 026 Pro Stihl chainsaw bar oiler is not working, there are a few things you can check to try to troubleshoot the problem.

In this guide, we will walk you through the steps to diagnose and resolve the issue. We will also provide some tips on how to prevent this problem from happening in the future.

We understand that dealing with a broken chainsaw can be a major inconvenience. That’s why we’ve put together this guide to help you get your saw back up and running as quickly as possible.

Why 026 Pro Stihl Chainsaw Bar Oiler Not Working

Reasons Why 026 Pro Stihl Chainsaw Bar Oiler Not Working

The oiler is not getting enough oil.

This can be caused by a number of things, including:
A clogged oil filter
A kinked or blocked oil line
A faulty oil pump
To fix this, you will need to identify the source of the problem and take steps to correct it.

The oiler is not adjusted correctly.

The oiler may be spraying too much or too little oil. This can be adjusted by turning the oiler adjustment screw.

The bar is not properly lubricated.

Even if the oiler is working properly, the bar may not be getting enough lubrication if it is not properly cleaned and oiled.
To fix this, you will need to clean the bar and apply a light coat of oil.

The bar is worn out.

If the bar is worn out, it may not be able to hold oil properly. This can cause the oil to leak out and not reach the chain.
To fix this, you will need to replace the bar.

How to Troubleshoot: 026 pro stihl chainsaw bar oiler not working

Symptoms

The bar oiler is not dispensing oil to the chain.
The chain is becoming hot and smoking.
The chain is skipping or binding.
The chain is wearing out quickly.

Causes

There are a number of possible causes for a 026 pro stihl chainsaw bar oiler not working. These include:

The oiler is clogged. The oiler can become clogged with sawdust, dirt, or other debris. This will prevent the oil from flowing to the chain.
The oiler is not adjusted properly. The oiler may be adjusted so that it is not dispensing enough oil. This can cause the chain to become hot and wear out quickly.
The oiler is leaking. The oiler may be leaking oil, which will prevent the oil from reaching the chain.
The oiler is broken. The oiler may be broken, which will prevent it from dispensing oil altogether.

Troubleshooting

To troubleshoot a 026 pro stihl chainsaw bar oiler not working, follow these steps:

1. Check the oil level. Make sure that the oil level in the oiler is correct. The oil level should be between the full and add marks on the oiler.
2. Clean the oiler. If the oiler is clogged, clean it with a small brush or a toothpick. Be careful not to damage the oiler.
3. Adjust the oiler. If the oiler is not adjusted properly, adjust it so that it is dispensing the correct amount of oil. The oiler should be adjusted so that a small stream of oil is visible when the chainsaw is running.
4. Check for leaks. If the oiler is leaking, repair or replace the oiler.
5. Replace the oiler. If the oiler is broken, replace it with a new oiler.

PreventionFAQs: 026 Pro Stihl Chainsaw Bar Oiler Not Working

Why is my 026 Pro Stihl chainsaw bar oiler not working?

There are a few possible reasons why your 026 Pro Stihl chainsaw bar oiler may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to properly deliver oil to the bar and chain. To clean the oiler, remove the oiler cover and use a small brush to clean out any debris.
The oiler may be empty. If the oiler is empty, it will not be able to deliver oil to the bar and chain. To check the oil level, remove the oiler cover and look inside. If the oil level is low, add more oil to the oiler.
The oiler may be defective. If the oiler is defective, it will not be able to properly deliver oil to the bar and chain. If you suspect that the oiler is defective, you should have it replaced by a qualified technician.

How do I fix a clogged 026 Pro Stihl chainsaw bar oiler?

To fix a clogged 026 Pro Stihl chainsaw bar oiler, you will need to clean the oiler. To do this, follow these steps:

1. Remove the oiler cover.
2. Use a small brush to clean out any debris from the oiler.
3. Reinstall the oiler cover.

How do I check the oil level in my 026 Pro Stihl chainsaw bar oiler?

To check the oil level in your 026 Pro Stihl chainsaw bar oiler, you will need to follow these steps:

1. Remove the oiler cover.
2. Look inside the oiler.
3. If the oil level is low, add more oil to the oiler.

How do I replace the oiler on my 026 Pro Stihl chainsaw?

To replace the oiler on your 026 Pro Stihl chainsaw, you will need to follow these steps:

1. Remove the old oiler.
2. Install the new oiler.
3. Add oil to the oiler.

What are the symptoms of a bad 026 Pro Stihl chainsaw bar oiler?

The symptoms of a bad 026 Pro Stihl chainsaw bar oiler may include:

The chain is not being properly lubricated.
The chain is getting hot.
The chain is smoking.
The chain is skipping.
The chain is wearing out prematurely.

Next Post to Read: 16 Craftsman Chainsaw Oiler Not Working