As a Pressure Washer Repair Technician, I have seen many cases of AR Blue Clean pressure washer soap dispensers not working. This can be a frustrating and inconvenient issue for owners, as it can prevent them from using their pressure washer to clean their property. However, it is important to remember that this issue is usually fixable, and by following a few simple troubleshooting steps, you can quickly diagnose and resolve the problem.
In this guide, I will walk you through the process of troubleshooting a AR Blue Clean pressure washer soap dispenser that is not working. I will provide you with a list of common causes for this issue, as well as instructions on how to fix each one. By following these steps, you can quickly get your pressure washer back up and running, so you can get back to cleaning your property.
Why Ar Blue Clean Pressure Washer Soap Dispenser Not Working
Reasons Why
The soap dispenser is clogged.
:
This is the most common reason for a soap dispenser not working. The soap can become clogged with dirt, debris, or soap scum. To fix this, you can try to clear the clog by using a thin object, such as a toothpick or a pipe cleaner. If the clog is too stubborn, you may need to replace the soap dispenser.
The soap dispenser is not getting enough water.
:
This can happen if the water pressure is too low or if the water hose is kinked. To fix this, you can try increasing the water pressure or checking the water hose for kinks.
The soap dispenser is not turned on.
:
This is a simple mistake that is easy to make. Make sure that the soap dispenser is turned on and that the switch is set to soap.
The soap dispenser is not compatible with the pressure washer.
:
Some soap dispensers are only compatible with certain types of pressure washers. Make sure that the soap dispenser you are using is compatible with your pressure washer.
The soap dispenser is broken.
:
If the soap dispenser is old or damaged, it may need to be replaced.
How to Troubleshoot and Fix: AR Blue Clean Pressure Washer Soap Dispenser Not Working
Symptoms of a Problem with Your AR Blue Clean Pressure Washer Soap Dispenser
There are a few different symptoms that you may experience if your AR Blue Clean pressure washer soap dispenser is not working properly. These include:
The soap dispenser does not dispense any soap when you press the trigger.
The soap dispenser dispenses soap, but it does so very slowly.
The soap dispenser dispenses soap in a very uneven pattern.
The soap dispenser leaks soap.
Troubleshooting Steps for a Problem with Your AR Blue Clean Pressure Washer Soap Dispenser
If you are experiencing any of the symptoms listed above, you can try the following troubleshooting steps to fix the problem:
1. Check the soap reservoir:
Make sure that the soap reservoir is full of soap and that the soap is not clogged. If the soap reservoir is empty, fill it up with soap. If the soap is clogged, try to clear the clog by using a thin object, such as a toothpick or a paper clip.
2. Check the soap dispenser nozzle:
Make sure that the soap dispenser nozzle is not clogged. If the nozzle is clogged, try to clear the clog by using a thin object, such as a toothpick or a paper clip.3. Check the soap dispenser hose:
Make sure that the soap dispenser hose is not kinked or damaged. If the hose is kinked or damaged, replace it with a new hose.
4. Check the soap dispenser valve:
Make sure that the soap dispenser valve is open. If the valve is closed, open it by turning it clockwise.
How to Fix a Leaking AR Blue Clean Pressure Washer Soap Dispenser
If your AR Blue Clean pressure washer soap dispenser is leaking, you can try the following steps to fix the problem:
1. Check the soap reservoir gasket:
The soap reservoir gasket is a rubber ring that seals the soap reservoir to the soap dispenser. If the gasket is damaged or worn out, it can cause the soap dispenser to leak. To check the gasket, remove the soap reservoir from the soap dispenser. If the gasket is damaged or worn out, replace it with a new gasket.
2. Check the soap dispenser o-ring:
The soap dispenser o-ring is a rubber ring that seals the soap dispenser nozzle to the soap dispenser. If the o-ring is damaged or worn out, it can cause the soap dispenser to leak. To check the o-ring, remove the soap dispenser nozzle from the soap dispenser. If the o-ring is damaged or worn out, replace it with a new o-ring.3. Check the soap dispenser hose:
The soap dispenser hose is a rubber hose that connects the soap dispenser to the pressure washer. If the hose is kinked or damaged, it can cause the soap dispenser to leak. To check the hose, inspect it for kinks or damage. If the hose is kinked or damaged, replace it with a new hose.
Conclusion
If you have tried the troubleshooting steps above and your AR Blue Clean pressure washer soap dispenser is still not working properly, you may need to contact a qualified technician for assistance.
FAQs: AR Blue Clean Pressure Washer Soap Dispenser Not Working
Why is my AR Blue Clean pressure washer soap dispenser not working?
There are a few possible reasons why your AR Blue Clean pressure washer soap dispenser may not be working. Here are some of the most common causes:
The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, you can try cleaning the dispenser with a degreaser or a vinegar solution.
The soap dispenser is not getting enough water: Make sure that the water supply to the pressure washer is turned on and that the water pressure is high enough.
The soap dispenser is not aligned properly: The soap dispenser should be aligned with the spray nozzle so that the soap is sprayed directly onto the surface you are cleaning.
The soap dispenser is not turned on: Make sure that the soap dispenser is turned on.
The soap dispenser is broken: If you have tried all of the above and the soap dispenser is still not working, it may be broken and need to be replaced.
How do I clean the soap dispenser on my AR Blue Clean pressure washer?
To clean the soap dispenser on your AR Blue Clean pressure washer, you can use a degreaser or a vinegar solution. Here are the steps:
1. Turn off the pressure washer and disconnect the hose from the water supply.
2. Remove the soap dispenser from the pressure washer.
3. Pour a degreaser or a vinegar solution into the soap dispenser.
4. Use a brush to scrub the inside of the soap dispenser.
5. Rinse the soap dispenser with water.
6. Reattach the soap dispenser to the pressure washer.
How do I make sure that my AR Blue Clean pressure washer soap dispenser is getting enough water?
To make sure that your AR Blue Clean pressure washer soap dispenser is getting enough water, you can check the following:
Make sure that the water supply to the pressure washer is turned on.
Make sure that the water pressure is high enough.
Check the hose for leaks.
Check the filter for clogs.
If you have checked all of these things and the soap dispenser is still not getting enough water, you may need to call a technician to fix the problem.
How do I align the soap dispenser on my AR Blue Clean pressure washer?
To align the soap dispenser on your AR Blue Clean pressure washer, you can follow these steps:
1. Turn off the pressure washer and disconnect the hose from the water supply.
2. Remove the soap dispenser from the pressure washer.
3. Align the soap dispenser with the spray nozzle so that the soap is sprayed directly onto the surface you are cleaning.
4. Reattach the soap dispenser to the pressure washer.
How do I turn on the soap dispenser on my AR Blue Clean pressure washer?
To turn on the soap dispenser on your AR Blue Clean pressure washer, you can follow these steps:
1. Turn on the pressure washer.
2. Press the soap dispenser button.
The soap dispenser will start dispensing soap. You can adjust the amount of soap being dispensed by pressing the soap dispenser button again.
What should I do if my AR Blue Clean pressure washer soap dispenser is still not working?
If your AR Blue Clean pressure washer soap dispenser is still not working after you have tried all of the above, you may need to call a technician to fix the problem.
Next Post To Read: Bauer Electric Pressure Washer Not Working
