John

The hedge trimmer is working but not cutting because the blades are dull. To sharpen the blades, remove the screws that hold the blades in place and use a file to sharpen the edges. Once the blades are sharp, replace the screws and test the trimmer on a piece of wood.

Hedge trimmer carefully trimming blackberry bushes in a garden.

Hedge trimmer won’t stay running

Possible causes

Low oil level
Dirty air filter
Clogged fuel filter
Faulty spark plug
Bad fuel
Engine overheating

If your hedge trimmer won’t start when hot, try letting it cool down for a few minutes. If that doesn’t work, you may need to clean the spark plug or replace the fuel filter.

The hedge trimmer won’t stay running because the spark plug is dirty. Clean the spark plug with a wire brush and reattach it.

If the hedge trimmer won’t start when hot, try letting it cool down for a few minutes before starting it again. If it still won’t start, check the air filter and spark plug for damage or blockage.

The hedge trimmer won’t cut because the blades are dull. To sharpen the blades, remove the screws that hold the blades in place and then use a file to sharpen the blades. Once the blades are sharpened, replace the screws and test the hedge trimmer.

Efficient, powerful, and easy to use, this hedge trimmer is perfect for both commercial and residential use. With its sharp blades and long reach, it can quickly and easily trim even the thickest hedges.

The hedge trimmer keeps stalling when you try to use it on thick branches. This is because the motor is not getting enough power. You can try cleaning the air filter, tightening the blade bolts, or replacing the spark plug.

If your hedge trimmer blades won’t move, check the drive belt. If the belt is loose or broken, replace it. You may also need to clean or lubricate the trimmer’s drive mechanism.