Automatic Oiler On Chainsaw Not Working

As a chainsaw owner, there are few things more frustrating than having your automatic oiler stop working. Not only can it lead to damage to your saw, but it can also be a major inconvenience. After all, who wants to have to manually oil their chainsaw every time they use it

If your automatic oiler is not working, there are a few things you can check to try to troubleshoot the problem. In this guide, we will walk you through the steps of diagnosing and resolving the issue. We will also provide some tips on how to prevent future problems.

By following these steps, you can quickly and easily get your chainsaw back up and running in no time. So if your automatic oiler is not working, don’t despair! Just follow our guide and you’ll be back to cutting wood in no time.

Why Automatic Oiler On Chainsaw Not Working

1. Oiler Pump Not Working

The oiler pump is responsible for sending oil to the chain. If the pump is not working, the chain will not be lubricated and will quickly wear out. There are a few things that can cause the oiler pump to stop working, including:

A clogged oiler pump: The oiler pump can become clogged with dirt or debris, which prevents it from pumping oil.
A faulty oiler pump: The oiler pump may be faulty and not pumping oil properly.
A loose oiler pump: The oiler pump may be loose and not making proper contact with the chain, which prevents it from pumping oil.

2. Oiler Hose Not Connected Properly

The oiler hose connects the oiler pump to the chain. If the oiler hose is not connected properly, the oil will not be able to reach the chain. There are a few things that can cause the oiler hose to become disconnected, including:

A damaged oiler hose: The oiler hose can be damaged by sharp objects, which can cause it to leak or become disconnected.
A loose oiler hose: The oiler hose can become loose over time, which can cause it to leak or become disconnected.
A kinked oiler hose: The oiler hose can become kinked, which can prevent the oil from flowing properly.

3. Oiler Level Too Low

The oiler level must be kept at a certain level in order for the oiler to work properly. If the oil level is too low, the oiler will not be able to pump enough oil to the chain. There are a few things that can cause the oil level to become low, including:

A leaking oil tank: The oil tank can leak, which will cause the oil level to drop.
A faulty oiler pump: The oiler pump may be faulty and not pumping enough oil.
A clogged oiler filter: The oiler filter can become clogged with dirt or debris, which prevents the oil from flowing properly.

4. Chain Too Tight

If the chain is too tight, it can put pressure on the oiler pump and prevent it from working properly. There are a few things that can cause the chain to become too tight, including:

A worn-out chain: A worn-out chain can stretch and become too tight.
A poorly adjusted chain: The chain may be improperly adjusted and is too tight.
A bent sprocket: The sprocket may be bent and is causing the chain to become too tight.

5. Chainsaw Not Running Properly

If the chainsaw is not running properly, it can cause the oiler to not work properly. There are a few things that can cause the chainsaw to not run properly, including:

A dirty air filter: A dirty air filter can restrict airflow and cause the chainsaw to run poorly.
A clogged spark plug: A clogged spark plug can prevent the chainsaw from firing properly.
A faulty carburetor: The carburetor may be faulty and is not providing the correct amount of fuel to the engine.

How to Troubleshoot: Automatic Oiler on Chainsaw Not Working

Your chainsaw’s automatic oiler is an important part of keeping your saw running smoothly. It helps to lubricate the chain and bar, preventing wear and tear. If your automatic oiler isn’t working, it can cause your chain to overheat and wear out prematurely.

There are a few things you can check to troubleshoot the problem. First, make sure that the oiler is turned on. On some models, the oiler switch is located on the side of the saw. On other models, the oiler switch is located on the front of the saw.

Next, check the oil level in the oiler reservoir. The oil level should be between the full and add oil marks on the reservoir. If the oil level is low, add oil to the reservoir.

If the oiler is turned on and the oil level is correct, but the oiler is still not working, you may need to replace the oiler. To replace the oiler, follow the instructions in your saw’s owner’s manual.

Troubleshooting Tips

Here are a few tips to help you troubleshoot a chainsaw’s automatic oiler:

Check the oiler hose. The oiler hose can become kinked or blocked, preventing oil from reaching the chain. Check the hose for any damage and make sure it is clear of obstructions.
Check the oiler pump. The oiler pump can become clogged with debris, preventing oil from being pumped to the chain. Clean the oiler pump with a small brush or needle.
Check the oiler valve. The oiler valve can become stuck, preventing oil from being released from the reservoir. Clean the oiler valve with a small brush or needle.
Replace the oiler. If the oiler is damaged or worn out, it will need to be replaced.

Conclusion

By following these tips, you can troubleshoot a chainsaw’s automatic oiler and get your saw back up and running smoothly.

FAQs: Automatic Oiler on Chainsaw Not Working

Why is my automatic oiler not working?

There are a few possible reasons why your automatic oiler may not be working. Here are some of the most common:

The oiler is not properly installed. Make sure that the oiler is installed correctly according to the manufacturer’s instructions.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent it from working properly. To clean the oiler, remove it from the chainsaw and clean it with a soft brush.
The oiler is not getting enough oil. The oiler may not be getting enough oil if the oil level in the chainsaw is low. Make sure that the oil level is correct and that the oil is flowing freely to the oiler.
The oiler is defective. If the oiler is defective, it will not be able to work properly. If you suspect that the oiler is defective, you should contact the manufacturer for a replacement.

How do I fix my automatic oiler?

If your automatic oiler is not working, you can try the following steps to fix it:

Check the oiler installation. Make sure that the oiler is installed correctly according to the manufacturer’s instructions.
Clean the oiler. Remove the oiler from the chainsaw and clean it with a soft brush.
Check the oil level. Make sure that the oil level in the chainsaw is correct and that the oil is flowing freely to the oiler.
Replace the oiler. If the oiler is defective, you should contact the manufacturer for a replacement.

How often should I oil my chainsaw?

The frequency with which you should oil your chainsaw depends on the type of chainsaw and the conditions in which you are using it. However, as a general rule, you should oil your chainsaw after every 2-3 hours of use.

What type of oil should I use in my chainsaw?

The type of oil you use in your chainsaw depends on the type of chainsaw and the conditions in which you are using it. However, as a general rule, you should use a high-quality chainsaw oil that is specifically designed for chainsaws.

How can I prevent my automatic oiler from clogging?

There are a few things you can do to prevent your automatic oiler from clogging:

Use a high-quality chainsaw oil. Chainsaw oil that is low quality or contaminated with dirt or debris can clog the oiler.
Keep the oil level in the chainsaw correct. If the oil level is too low, it can cause the oiler to work harder and eventually clog.
Clean the oiler regularly. Regularly cleaning the oiler will help to prevent it from clogging.

By following these tips, you can help to keep your automatic oiler working properly and prevent it from clogging.

Next Post to Read: Battery Driven Chainsaw Oiler Not Working