Your battery pole saw is a powerful tool that can make quick work of trimming branches and clearing brush. But when it won’t start, it can be a major inconvenience. There are a few common reasons why a battery pole saw might not start, and most of them are easy to fix.
In this article, we’ll take a look at some of the most common causes of a battery pole saw not starting, and we’ll provide step-by-step instructions on how to fix them. By the end of this article, you’ll be able to get your battery pole saw up and running again in no time.
So Battery Pole Saw Won’T Start
Your Battery Pole Saw Won’t Start? Here’s What to Do
1. Check the battery charge:
Make sure the battery is fully charged and properly connected to the pole saw.
2. Clean the battery terminals:
Use a clean cloth to remove any dirt or corrosion from the battery terminals.3. Check the spark plug:
Remove the spark plug and inspect it for damage. If the spark plug is damaged, replace it with a new one.
4. Adjust the carburetor:
If the carburetor is not adjusted properly, the pole saw may not start or may run poorly.
5. Take your pole saw to a qualified repair technician if you are unable to fix the problem yourself:
Battery Pole Saw Won’t Start
Troubleshooting a Battery Pole Saw
If your battery pole saw won’t start, there are a few things you can check to troubleshoot the problem.
Check the battery:
Make sure the battery is charged and properly connected to the pole saw. If the battery is not charged, you can charge it using the charger that came with the pole saw. If the battery is properly connected and still not charged, you may need to replace the battery.
Check the spark plug:
The spark plug is responsible for igniting the fuel in the pole saw’s engine. If the spark plug is dirty or damaged, it can prevent the engine from starting. To check the spark plug, remove it from the engine and inspect it for damage. If the spark plug is dirty, clean it with a wire brush. If the spark plug is damaged, replace it with a new one.
Check the fuel filter:
The fuel filter removes dirt and debris from the fuel before it enters the engine. If the fuel filter is clogged, it can prevent the engine from getting enough fuel to start. To check the fuel filter, remove it from the fuel line and inspect it for dirt and debris. If the fuel filter is clogged, replace it with a new one.
Check the air filter:
The air filter prevents dirt and debris from entering the engine. If the air filter is dirty, it can restrict the flow of air to the engine, which can make it difficult to start. To check the air filter, remove it from the engine and inspect it for dirt and debris. If the air filter is dirty, clean it with a brush or replace it with a new one.
Check the carburetor:
The carburetor is responsible for mixing the fuel and air in the correct proportions for the engine. If the carburetor is not adjusted properly, it can prevent the engine from starting. To check the carburetor, you will need to adjust the idle speed, the fuel mixture, and the choke. If you are not comfortable adjusting the carburetor, you can take your pole saw to a qualified repair shop.
How to Start a Battery Pole Saw
Once you have troubleshooted the problem and fixed any issues, you can start your battery pole saw by following these steps:
1. Make sure the battery is charged and properly connected to the pole saw.
2. Turn the choke on.
3. Press the primer bulb several times.
4. Pull the starter rope until the engine starts.
5. Release the choke once the engine is running.
Tips for Maintaining Your Battery Pole Saw
To keep your battery pole saw in good working order, you should follow these tips:
Charge the battery regularly:
Even if you don’t use your pole saw often, it’s important to charge the battery regularly to prevent it from becoming discharged.
Inspect the spark plug regularly:
The spark plug is a critical part of your pole saw, so it’s important to inspect it regularly for damage. If the spark plug is dirty, clean it with a wire brush. If the spark plug is damaged, replace it with a new one.
Check the fuel filter regularly:
The fuel filter prevents dirt and debris from entering the engine. If the fuel filter is clogged, it can prevent the engine from getting enough fuel to start. To check the fuel filter, remove it from the fuel line and inspect it for dirt and debris. If the fuel filter is clogged, replace it with a new one.
Check the air filter regularly:
The air filter prevents dirt and debris from entering the engine. If the air filter is dirty, it can restrict the flow of air to the engine, which can make it difficult to start. To check the air filter, remove it from the engine and inspect it for dirt and debris. If the air filter is dirty, clean it with a brush or replace it with a new one.
Adjust the carburetor regularly:
The carburetor is responsible for mixing the fuel and air in the correct proportions for the engine. If the carburetor is not adjusted properly, it can prevent the engine from starting. To check the carburetor, you will need to adjust the idle speed, the fuel mixture, and the choke. If you are not comfortable adjusting the carburetor, you can take your pole saw to a qualified repair shop.
By following these tips, you can help keep your battery pole saw in good working order and prevent it from starting problems.
Also Read: Battery Saw Yard Work
FAQs: Battery Pole Saw Won’t Start
Why won’t my battery pole saw start?
There are a few possible reasons why your battery pole saw won’t start. Here are some of the most common:
The battery is dead: This is the most common reason why a pole saw won’t start. Make sure the battery is fully charged before trying to start the saw.
The battery terminals are corroded: If the battery terminals are corroded, they will not make good contact with the battery, and the saw will not start. Clean the battery terminals with a wire brush and apply a thin coat of dielectric grease to prevent future corrosion.
The spark plug is fouled: A fouled spark plug can also prevent the saw from starting. Remove the spark plug and clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
The carburetor is dirty: A dirty carburetor can also cause problems with starting. Clean the carburetor according to the manufacturer’s instructions.
The air filter is dirty: A dirty air filter can restrict airflow to the engine, making it difficult to start. Clean the air filter according to the manufacturer’s instructions.
What should I do if my battery pole saw won’t start?
If your battery pole saw won’t start, here are a few things you can try:
Check the battery: Make sure the battery is fully charged and that the battery terminals are clean and free of corrosion.
Clean the spark plug: Remove the spark plug and clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
Check the carburetor: Clean the carburetor according to the manufacturer’s instructions.
Check the air filter: Clean the air filter according to the manufacturer’s instructions.
Take the saw to a qualified technician: If you have tried all of the above and the saw still won’t start, it may be time to take it to a qualified technician for diagnosis and repair.
How can I prevent my battery pole saw from not starting?
There are a few things you can do to prevent your battery pole saw from not starting:
Keep the battery charged: Make sure to keep the battery charged at all times. If you don’t use the saw often, charge the battery at least once a month.
Protect the battery from corrosion: Keep the battery terminals clean and free of corrosion. Apply a thin coat of dielectric grease to the terminals to prevent future corrosion.
Maintain the carburetor: Clean the carburetor according to the manufacturer’s instructions.
Replace the air filter regularly: Replace the air filter according to the manufacturer’s instructions.
What are the signs that my battery pole saw needs to be serviced?
There are a few signs that your battery pole saw needs to be serviced:
The saw starts slowly or doesn’t start at all.
The saw loses power while you’re using it.
The saw smokes or smells like burning oil.
The saw makes strange noises.
The saw vibrates excessively.
If you notice any of these signs, it’s time to take the saw to a qualified technician for diagnosis and repair.
How much does it cost to service a battery pole saw?
The cost of servicing a battery pole saw varies depending on the make and model of the saw, the type of service that is needed, and the location of the service center.
Generally speaking, you can expect to pay anywhere from $50 to $100 for a basic service. This type of service typically includes cleaning the carburetor, replacing the air filter, and checking the spark plug.
If the saw needs more extensive repairs, such as a new battery or a carburetor overhaul, the cost can be significantly higher.
It’s always a good idea to get a quote from a qualified technician before having your saw serviced. This will help you budget for the cost and make sure you’re getting the best possible price.
