A Quick and Easy Fix
Your Black and Decker electric chainsaw is a powerful tool that can make quick work of cutting through branches and logs. But what happens when the chain won’t spin This is a common problem, and there are a few simple things you can check to fix it.
In this article, we’ll walk you through the steps to troubleshoot and fix a Black and Decker electric chainsaw chain that won’t spin. We’ll also provide some tips on how to prevent this problem from happening in the future.
So Black And Decker Electric Chainsaw Chain Won’T Spin
Black & Decker Electric Chainsaw Chain Won’t Spin: How to Fix It
If your Black & Decker electric chainsaw chain won’t spin, here are a few things you can check:
1. Make sure the chainsaw is turned on and the chain brake is disengaged.
2. Check the chain tension. The chain should be tight enough to stay on the guide bar, but not so tight that it’s difficult to turn the chainsaw by hand.
3. Clean the bar and chain. A dirty bar and chain can cause the chain to bind and not spin properly.
4. Inspect the chain for damage. If the chain is damaged, it will need to be replaced.
5. Check the sprockets. The sprockets are the gears that drive the chain. If the sprockets are worn or damaged, they will need to be replaced.
6. Check the motor. If the motor is not working properly, it will not be able to drive the chain.
If you have checked all of these things and the chain still won’t spin, you may need to take the chainsaw to a qualified repair technician.
Black and Decker Electric Chainsaw Chain Won’t Spin
What Could Be the Problem?
There are a few possible reasons why your Black and Decker electric chainsaw chain might not be spinning.
The chain is too tight:
If the chain is too tight, it can bind up and prevent the chainsaw from running smoothly. To check the chain tension, follow these steps:
Turn off the chainsaw and disconnect the spark plug wire.
Use the chain tensioning knob to loosen the chain.
Move the chain up and down on the bar. The chain should move freely without binding.
If the chain is too tight, continue to loosen the chain tensioning knob until the chain moves freely.
The chain is too loose:
If the chain is too loose, it can come off the bar and cause a safety hazard. To check the chain tension, follow these steps:
Turn off the chainsaw and disconnect the spark plug wire.
Use the chain tensioning knob to tighten the chain.
Move the chain up and down on the bar. The chain should move freely without coming off the bar.
If the chain is too loose, continue to tighten the chain tensioning knob until the chain is snug against the bar.
The bar is dirty or damaged:
If the bar is dirty or damaged, it can cause the chain to bind up and not spin properly. To clean the bar, follow these steps:
Turn off the chainsaw and disconnect the spark plug wire.
Use a soft cloth to wipe down the bar.
Use a file to remove any burrs or damage from the bar.
The chain is dull:
A dull chain can cause the chainsaw to run slowly and not spin properly. To sharpen the chain, follow these steps:
Turn off the chainsaw and disconnect the spark plug wire.
Use a chainsaw file to sharpen the chain.
Make sure to sharpen the chain evenly on both sides.
The chainsaw is out of gas:
If the chainsaw is out of gas, it won’t run and the chain won’t spin. To check the gas level, follow these steps:
Turn off the chainsaw and disconnect the spark plug wire.
Remove the gas cap from the chainsaw.
Check the gas level. The gas tank should be at least half full.
If the gas level is low, fill up the gas tank with fresh gasoline.
The spark plug is bad:
If the spark plug is bad, it can cause the chainsaw to not run and the chain won’t spin. To check the spark plug, follow these steps:
Turn off the chainsaw and disconnect the spark plug wire.
Remove the spark plug from the chainsaw.
Use a spark plug tester to check the spark plug.
If the spark plug is bad, replace it with a new spark plug.
How to Fix a Black and Decker Electric Chainsaw Chain Won’t Spin
Once you have identified the problem, you can fix the Black and Decker electric chainsaw chain won’t spin issue.
To tighten the chain, follow these steps:
1. Turn off the chainsaw and disconnect the spark plug wire.
2. Use the chain tensioning knob to loosen the chain.
3. Move the chain up and down on the bar. The chain should move freely without binding.
4. If the chain is too tight, continue to loosen the chain tensioning knob until the chain moves freely.
To loosen the chain, follow these steps:
1. Turn off the chainsaw and disconnect the spark plug wire.
2. Use the chain tensioning knob to tighten the chain.
3. Move the chain up and down on the bar. The chain should move freely without coming off the bar.
4. If the chain is too loose, continue to tighten the chain tensioning knob until the chain is snug against the bar.
To clean the bar, follow these steps:
1. Turn off the chainsaw and disconnect the spark plug wire.
2. Use a soft cloth to wipe down the bar.
3. Use a file to remove any burrs or damage from the bar.
To sharpen the chain, follow these steps:
1. Turn off the chainsaw and disconnect the spark plug wire.
2. Use a chainsaw file to sharpen the chain.
3. Make sure to sharpen the chain evenly on both sides.
To check the gas level, follow these steps:
1. Turn off the chainsaw and disconnect the spark plug wire.
Also Read THis: Black And Decker Electric Chainsaw Won T Start
FAQs: Black and Decker Electric Chainsaw Chain Won’t Spin
Why won’t my Black and Decker electric chainsaw chain spin?
There are a few possible reasons why your Black and Decker electric chainsaw chain might not be spinning. Here are some of the most common causes:
The chain is too tight: If the chain is too tight, it will not be able to move freely around the bar. To check the chain tension, follow the instructions in your chainsaw’s owner’s manual.
The chain is too loose: If the chain is too loose, it will not be able to grip the wood properly and will slip. To check the chain tension, follow the instructions in your chainsaw’s owner’s manual.
The bar is bent: If the bar is bent, it will not be able to spin properly and the chain will not be able to move. To check the bar for bends, visually inspect it and run your finger along the length of the bar. If you feel any bumps or irregularities, the bar is likely bent.
The sprocket is worn out: The sprocket is the gear that drives the chain. If the sprocket is worn out, it will not be able to turn the chain properly. To check the sprocket for wear, visually inspect it and look for any cracks or missing teeth.
The clutch is not engaging: The clutch is the mechanism that engages the chain with the bar. If the clutch is not engaging, the chain will not be able to spin. To check the clutch, follow the instructions in your chainsaw’s owner’s manual.
How do I fix a Black and Decker electric chainsaw chain that won’t spin?
To fix a Black and Decker electric chainsaw chain that won’t spin, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are the steps to fix a chainsaw chain that won’t spin:
1. Check the chain tension: If the chain is too tight, it will not be able to move freely around the bar. To check the chain tension, follow the instructions in your chainsaw’s owner’s manual.
2. Check the chain for wear: If the chain is worn out, it will not be able to grip the wood properly and will slip. To check the chain for wear, visually inspect it and look for any cracks or missing teeth.
3. Check the bar for bends: If the bar is bent, it will not be able to spin properly and the chain will not be able to move. To check the bar for bends, visually inspect it and run your finger along the length of the bar. If you feel any bumps or irregularities, the bar is likely bent.
4. Check the sprocket for wear: The sprocket is the gear that drives the chain. If the sprocket is worn out, it will not be able to turn the chain properly. To check the sprocket for wear, visually inspect it and look for any cracks or missing teeth.
5. Check the clutch: The clutch is the mechanism that engages the chain with the bar. If the clutch is not engaging, the chain will not be able to spin. To check the clutch, follow the instructions in your chainsaw’s owner’s manual.
What can I do to prevent my Black and Decker electric chainsaw chain from not spinning?
To prevent your Black and Decker electric chainsaw chain from not spinning, you can take the following steps:
Keep the chain properly tensioned: The chain should be tight enough to stay on the bar, but not so tight that it is difficult to move.
Inspect the chain regularly for wear: Replace the chain if it is worn out or damaged.
Inspect the bar regularly for bends: Replace the bar if it is bent.
Inspect the sprocket regularly for wear: Replace the sprocket if it is worn out or damaged.
Check the clutch regularly: Make sure the clutch is engaging properly.
What should I do if my Black and Decker electric chainsaw chain won’t spin and I can’t fix it myself?
If you have tried to fix your Black and Decker electric chainsaw chain and you are still unable to get it to spin, you should take it to a qualified service technician. A qualified service technician will be able to diagnose the problem and repair the chainsaw properly.
Where can I find replacement parts for my Black and Decker electric chainsaw chain?
You can find replacement parts for your Black and Decker electric chainsaw chain at your local hardware store or online. When ordering replacement parts, be sure to specify the
