Do you have a Briggs and Stratton pressure washer that’s not dispensing detergent If so, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a simple solution. In this troubleshooting guide, I’ll walk you through the steps to diagnose and fix the problem. So you can get your pressure washer back up and running in no time.
Hook
Imagine this you’re trying to clean your driveway, deck, or siding, but your pressure washer isn’t dispensing detergent. You’re frustrated and you don’t know what to do. Well, you’re in luck. I’m going to show you how to fix this problem in a matter of minutes.
Why Briggs And Stratton Pressure Washer Detergent Tank Not Working
Defective Detergent Tank
The detergent tank may be defective if it is cracked, leaking, or has a hole in it. This can cause the detergent to leak out of the tank and not be able to reach the spray nozzle.
Clogged Detergent Inlet
The detergent inlet may be clogged if there is debris or buildup blocking it. This can prevent the detergent from flowing into the tank and being sprayed out of the nozzle.
Detergent Not Dispensing Properly
The detergent may not be dispensing properly if the detergent tank is not installed correctly, the detergent is not the correct type for the pressure washer, or the detergent is too thick.
Pressure Washer Not Pressurized
The pressure washer may not be pressurized if the pump is not working properly, the hose is kinked or damaged, or the nozzle is clogged. If the pressure washer is not pressurized, the detergent will not be able to be sprayed out of the nozzle.
How to Troubleshoot: Briggs and Stratton Pressure Washer Detergent Tank Not Working
Symptoms
There are a few different symptoms that you may experience if your Briggs and Stratton pressure washer detergent tank is not working properly. These include:
The detergent tank is not filling up with detergent.
The detergent is not spraying out of the wand when you press the trigger.
The detergent is spraying out of the wand in a weak or inconsistent stream.
The detergent is not sudsing up properly.
Causes
There are a number of different things that could cause your Briggs and Stratton pressure washer detergent tank to not work properly. These include:
A clogged detergent filter:
The detergent filter is located at the bottom of the detergent tank. It helps to keep dirt and debris from getting into the detergent and clogging the wand. If the filter is clogged, it will prevent the detergent from flowing through the tank and out the wand.
A faulty detergent pump:
The detergent pump is responsible for pumping the detergent from the tank to the wand. If the pump is faulty, it will not be able to pump the detergent properly and it will cause the detergent tank to not work properly.
A faulty detergent valve:
The detergent valve is located at the bottom of the detergent tank. It controls the flow of detergent from the tank to the wand. If the valve is faulty, it will not be able to properly control the flow of detergent and it will cause the detergent tank to not work properly.
Troubleshooting
To troubleshoot the problem with your Briggs and Stratton pressure washer detergent tank, you will need to first identify the cause of the problem. Here are a few things you can check:
Check the detergent filter:
Remove the detergent filter from the tank and inspect it for clogs. If the filter is clogged, clean it with warm water and a mild detergent. If the filter is damaged, replace it with a new one.
Check the detergent pump:
Turn on the pressure washer and listen for the detergent pump. If you do not hear the pump running, the pump may be faulty. You can test the pump by disconnecting the hose from the wand and placing it in a bucket of water. Turn on the pressure washer and check to see if the pump is pumping water. If the pump is not pumping water, it will need to be replaced.
Check the detergent valve:
Turn on the pressure washer and spray the detergent wand. If the detergent is not spraying out of the wand, the detergent valve may be faulty. You can test the valve by disconnecting the hose from the wand and placing it in a bucket of water. Turn on the pressure washer and check to see if the valve is opening and closing properly. If the valve is not opening and closing properly, it will need to be replaced.
Prevention
To prevent problems with your Briggs and Stratton pressure washer detergent tank, you can take a few steps to prevent clogs and other problems. These include:
Use the correct type of detergent:
Use a detergent that is specifically designed for pressure washers. Avoid using household detergents, as they can clog the detergent filter and the detergent pump.
Clean the detergent filter regularly:
Clean the detergent filter regularly to prevent it from becoming clogged.
Avoid using too much detergent:
Using too much detergent can cause the detergent to overflow and clog the detergent pump.
Store the pressure washer in a cool, dry place:
Storing the pressure washer in a cool, dry place will help to prevent the detergent from freezing and causing problems with the detergent tank.
Conclusion
By following these tips, you can help to troubleshoot and prevent problems with your Briggs and Stratton pressure washer detergent tank. If you are having trouble troubleshooting the problem yourself, you can always contact a qualified technician for help.
Also Read: Briggs And Stratton Pressure Washer Not Working
FAQs: Briggs and Stratton Pressure Washer Detergent Tank Not Working
Why is my Briggs and Stratton pressure washer detergent tank not working?
There are a few possible reasons why your Briggs and Stratton pressure washer detergent tank may not be working. Here are some of the most common causes:
The detergent tank is empty: This is the most common cause of a detergent tank not working. Make sure that the detergent tank is filled with the correct type of detergent and that the tank is properly closed.
The detergent hose is kinked or blocked: Check the detergent hose to make sure that it is not kinked or blocked. If the hose is kinked, you can try to straighten it out. If the hose is blocked, you can try to clear the blockage.
The detergent pump is not working properly: The detergent pump is responsible for pumping the detergent from the tank to the spray gun. If the pump is not working properly, you may need to have it repaired or replaced.
The detergent valve is not working properly: The detergent valve is responsible for controlling the flow of detergent from the tank to the spray gun. If the valve is not working properly, you may need to have it repaired or replaced.
How do I fix a Briggs and Stratton pressure washer detergent tank that is not working?
To fix a Briggs and Stratton pressure washer detergent tank that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can take the appropriate steps to fix the problem.
If the detergent tank is empty, fill it with the correct type of detergent and make sure that the tank is properly closed:
If the detergent hose is kinked or blocked, straighten out the hose or clear the blockage:
If the detergent pump is not working properly, have it repaired or replaced:
If the detergent valve is not working properly, have it repaired or replaced:
What type of detergent should I use in my Briggs and Stratton pressure washer?
You should use a detergent that is specifically designed for use in pressure washers. This type of detergent will be able to dissolve dirt and grime quickly and easily, and it will not damage your pressure washer.
Some of the most popular detergents for pressure washers include:
Simple Green Pressure Washer Detergent
Pine-Sol Pressure Washer Detergent
Dawn Power Washer Detergent
Meguiar’s Pressure Washer Detergent
Mr. Clean Pressure Washer Detergent
How much detergent should I use in my Briggs and Stratton pressure washer?
The amount of detergent you use in your Briggs and Stratton pressure washer will depend on the size of the job you are doing. For general cleaning, you will only need to use a small amount of detergent. For more difficult cleaning jobs, you may need to use more detergent.
As a general rule of thumb, you should use about 1 ounce of detergent per gallon of water. However, you may need to adjust this amount depending on the specific job you are doing.
How do I add detergent to my Briggs and Stratton pressure washer?
To add detergent to your Briggs and Stratton pressure washer, follow these steps:
1. Turn off the pressure washer and disconnect the spray gun.
2. Remove the detergent tank cap.
3. Add the desired amount of detergent to the tank.
4. Replace the detergent tank cap.
5. Connect the spray gun and turn on the pressure washer.
You can also add detergent to your pressure washer by using a detergent injector. A detergent injector is a device that attaches to the pressure washer and automatically injects detergent into the water stream. This can be a convenient way to add detergent to your pressure washer, especially if you are doing a large job.
