If your Briggs & Stratton pressure washer 020338-0 isn’t working, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself with a little troubleshooting.
In this guide, I’ll walk you through the steps to troubleshoot your pressure washer and get it up and running again. I’ll cover the most common causes of problems, as well as how to fix them. So if you’re ready to get your pressure washer back in action, let’s get started!
Why Briggs Stratton Pressure Washer 020338-0 Not Working
Briggs Stratton Pressure Washer 020338-0 Not Working
No Power
The power cord is not plugged in or is not plugged in all the way.
The circuit breaker is tripped.
The pressure washer is not getting enough gas.
The spark plug is dirty or damaged.
The fuel filter is clogged.
The carburetor is dirty or damaged.
No Water
The water hose is not connected to the pressure washer or is not connected all the way.
The water inlet filter is clogged.
The pump is damaged.
Low Pressure
The pressure washer is not primed.
The water pressure regulator is set too low.
The pump is damaged.
High Pressure
The pressure washer is not properly maintained.
The pressure washer is used for too long at a high pressure.
The pump is damaged.
How to Troubleshoot: Briggs & Stratton Pressure Washer 020338-0 Not Working
Symptoms
There are a few different symptoms that may indicate that your Briggs & Stratton pressure washer 020338-0 is not working properly. These include:
The pressure washer won’t start
The pressure washer starts but won’t build pressure
The pressure washer leaks
The pressure washer makes strange noises
The pressure washer’s water output is weak
Troubleshooting
If your Briggs & Stratton pressure washer 020338-0 is not working properly, you can troubleshoot the problem by following these steps:
1. Check the power cord:
Make sure that the power cord is plugged into an outlet and that the outlet is working properly.
2. Check the fuel tank:
Make sure that the fuel tank is full and that the fuel valve is turned on.3. Check the oil level:
Make sure that the oil level is correct.
4. Check the spark plug:
Remove the spark plug and check to see if it is dirty or damaged. If it is, replace it with a new spark plug.
5. Check the air filter:
Remove the air filter and check to see if it is dirty or damaged. If it is, replace it with a new air filter.
6. Check the fuel filter:
Remove the fuel filter and check to see if it is dirty or damaged. If it is, replace it with a new fuel filter.
7. Check the pressure washer pump:
If the pressure washer is still not working after you have checked all of the above, you may need to have the pressure washer pump repaired or replaced.
Preventative Maintenance
You can help prevent problems with your Briggs & Stratton pressure washer 020338-0 by following these tips:
Keep the pressure washer clean:
Make sure to clean the pressure washer after each use. This will help to prevent dirt and debris from building up and causing problems.
Inspect the pressure washer regularly:
Inspect the pressure washer regularly for signs of wear and tear. This will help you to identify problems early on and prevent them from becoming worse.
Replace worn or damaged parts:
Replace worn or damaged parts as soon as possible. This will help to keep the pressure washer running smoothly and prevent more serious problems from occurring.
By following these tips, you can help to keep your Briggs & Stratton pressure washer 020338-0 running smoothly for many years to come.
Also Read: Burner Not Working On Pressure Washer
FAQs: Briggs & Stratton Pressure Washer 020338-0 Not Working
Why is my Briggs & Stratton pressure washer not working?
There are a few possible reasons why your Briggs & Stratton pressure washer may not be working. Here are some of the most common causes:
The engine is not getting fuel: Make sure that the fuel tank is full and that the fuel line is not kinked or blocked.
The engine is not getting spark: Check the spark plug and make sure that it is properly installed and that the gap is correct.
The air filter is dirty: A dirty air filter can restrict airflow to the engine, causing it to run poorly or not at all.
The water pump is not working: Check the water pump to make sure that it is properly installed and that the impeller is not damaged.
The pressure washer is not getting enough water: Make sure that the water supply is turned on and that the hose is not kinked or blocked.
How do I fix a Briggs & Stratton pressure washer that is not working?
Once you have determined the cause of the problem, you can fix your Briggs & Stratton pressure washer by following these steps:
Check the fuel tank: Make sure that the fuel tank is full and that the fuel line is not kinked or blocked.
Check the spark plug: Remove the spark plug and check to make sure that it is properly installed and that the gap is correct. If the spark plug is damaged, replace it with a new one.
Clean the air filter: Remove the air filter and clean it with a clean, dry cloth. If the air filter is damaged, replace it with a new one.
Check the water pump: Remove the water pump cover and check the impeller to make sure that it is not damaged. If the impeller is damaged, replace it with a new one.
Check the water supply: Make sure that the water supply is turned on and that the hose is not kinked or blocked.
What are the safety precautions I should take when using a Briggs & Stratton pressure washer?
When using a Briggs & Stratton pressure washer, it is important to take the following safety precautions:
Wear safety glasses to protect your eyes from flying debris:
Wear gloves to protect your hands from the water and chemicals:
Stand with your feet shoulder-width apart and keep your balance:
Do not point the pressure washer at people or animals:
Do not use the pressure washer in wet or icy conditions:
Do not use the pressure washer to clean electrical equipment:
What are the different types of Briggs & Stratton pressure washers?
Briggs & Stratton offers a variety of pressure washers to meet the needs of different homeowners. Here are some of the most popular types:
Electric pressure washers are powered by an electric motor and are typically the most affordable option. They are ideal for small jobs around the house, such as cleaning decks and patios.
Gas-powered pressure washers are powered by a gasoline engine and are more powerful than electric pressure washers. They are ideal for larger jobs, such as cleaning cars and driveways.
Cold water pressure washers use cold water to clean surfaces. They are less expensive than hot water pressure washers, but they are not as effective at removing tough stains.
Hot water pressure washers use hot water to clean surfaces. They are more effective at removing tough stains, but they are more expensive than cold water pressure washers.
What is the best Briggs & Stratton pressure washer for me?
The best Briggs & Stratton pressure washer for you depends on the size of the jobs you need to do and your budget. If you only need a pressure washer for small jobs around the house, an electric pressure washer is a good option. If you need a pressure washer for larger jobs, a gas-powered pressure washer is a better option. If you need a pressure washer that can remove tough stains, a hot water pressure washer is a good option.
