Hedge Trimmer

If your hedge trimmer blades won’t move, check the drive belt. If the belt is loose or broken, replace it. You may also need to clean or lubricate the trimmer’s drive mechanism.

Greenworks hedge trimmer beeps and won’t turn on. Possible causes

Low battery Make sure the battery is charged.
Faulty battery Try a different battery.
Faulty switch Try replacing the switch.

Check air filter for blockage, clean or replace. Check fuel line for blockage, clean or replace. Check spark plug for damage, clean or replace.

If the blades on your electric hedge trimmer won’t move, check the switch to make sure it’s turned on. If it is, try unplugging the trimmer and plugging it back in. If that doesn’t work, you may need to replace the switch.

If your Ego hedge trimmer won’t turn on, it could be due to a number of reasons. Here are a few things to check

Make sure the trimmer is plugged in and turned on.
Check the battery to make sure it’s charged.
Try cleaning the trimmer’s air filter.
Inspect the trimmer’s spark plug for damage.
If you’re still having trouble, take the trimmer to a qualified service center.

The ego hedge trimmer blades won’t move because the brake is engaged. To disengage the brake, press the button on the top of the trimmer and slide the switch to the “off” position.

If your Echo hedge trimmer won’t cut, it may be due to a dull blade, a dirty blade, or a jammed blade. To fix this, you can try sharpening the blade, cleaning the blade, or unjamming the blade.

The Echo hedge trimmer won’t stay running because the air filter is dirty. Clean the air filter according to the owner’s manual.

If your Echo hedge trimmer won’t run, here are a few things to check
Make sure the trimmer is plugged in and turned on.
Check the fuel level and make sure there is enough gas in the tank.
Clean the spark plug and replace it if necessary.
Check the air filter and replace it if it is dirty.

If your Husqvarna hedge trimmer blades won’t move, you may need to adjust the blade tension. Loosen the hex bolt on the side of the trimmer head and turn the adjustment screw clockwise until the blades move freely. Tighten the hex bolt and test the trimmer.