Pressure washer lance not working
– Check if the water supply is turned on.
– Check if the lance is clogged.
– Clean or replace the nozzle.
– Check if the pressure washer is generating enough pressure.
Possible causes for a pressure washer not producing high pressure
Debris in the pump Check the pump for any debris that may be blocking the flow of water.
Clogged nozzle Clean or replace the nozzle if it is clogged.
Low water pressure Make sure that the water supply is turned on all the way and that there are no kinks in the hose.
Faulty pump If the pump is not working properly, it may need to be repaired or replaced.
Pressure washer governor not working
Check the governor linkage for damage or obstruction.
Clean or replace the governor valve.
Check the governor spring for damage or weakness.
Adjust the governor spring tension.
If the pressure washer fuel pump is not working, check the fuel filter, fuel line, and spark plug. If these are clear and free of obstructions, replace the fuel pump.
If the detergent tank on your pressure washer is not working, it could be due to a clog in the tank or in the detergent line. To fix this, you will need to remove the detergent tank and clean it out. You may also need to replace the detergent line.
Pressure washer detergent injector not working
– Check the detergent reservoir for clogs.
– Clean or replace the detergent injector.
– Check the detergent pump for leaks or damage.
– Inspect the detergent hose for kinks or damage.
Pressure washer detergent dispenser not working
Check the detergent reservoir for clogs.
Make sure the detergent is compatible with your pressure washer.
Check the detergent dispenser for leaks.
Clean the detergent dispenser according to the manufacturer’s instructions.
A pressure washer’s choke may not be working if the engine is hard to start, the engine runs rough, or the engine dies after starting. To fix the problem, check the choke cable for damage or kinks, clean the choke assembly, or replace the choke if necessary.
If the chemical injector on your Briggs and Stratton pressure washer is not working, it could be due to a number of factors, including a clogged injector, a faulty pump, or a problem with the hose. To troubleshoot the issue, you will need to inspect the injector, pump, and hose for any signs of damage or obstruction.
Pressure washer 5 gal new battery not working. Replaced battery, checked connections, no voltage coming from battery.