Chainsaw Tension Screw Not Working

As a chainsaw owner, there’s nothing more frustrating than when your tension screw stops working. This can make it impossible to use your chainsaw safely and effectively, and it can be a major inconvenience.

In this guide, I’ll walk you through the steps to troubleshoot a chainsaw tension screw that’s not working. I’ll cover the most common causes of this problem, and I’ll provide tips on how to fix it quickly and easily.

By the end of this guide, you’ll be able to diagnose and resolve the issue so that you can get back to using your chainsaw without any problems.

: A Frustrating and Inconvenient Problem

When your chainsaw tension screw stops working, it can be a major inconvenience. You may not be able to use your chainsaw at all, or you may find that it’s difficult to control and dangerous to operate.

There are a number of reasons why a chainsaw tension screw might stop working. Some of the most common causes include:

Damaged or worn-out parts: The tension screw is a small part, but it’s essential for the proper operation of your chainsaw. If the tension screw is damaged or worn out, it won’t be able to do its job properly.
Incorrect tension: If the chainsaw chain is too tight or too loose, it can put stress on the tension screw and cause it to malfunction.
Clogged or dirty parts: If the chainsaw chain is clogged with sawdust or other debris, it can make it difficult for the tension screw to work properly.

If you’re experiencing problems with your chainsaw tension screw, it’s important to troubleshoot the issue and fix it as soon as possible. By following the steps in this guide, you can quickly and easily get your chainsaw back up and running.

Why Chainsaw Tension Screw Not Working

Chainsaw Tension Screw Not Working

The screw is not tight enough. This is the most common cause of a chainsaw tension screw not working. To fix this, tighten the screw until it is snug against the bar.
The screw is too tight. If the screw is too tight, it can damage the bar and chain. To fix this, loosen the screw until it is just tight enough to keep the chain in place.
The screw is stripped. If the screw is stripped, it will not be able to hold the chain in place. To fix this, you will need to replace the screw.
The bar is bent. If the bar is bent, it will not be able to hold the chain in place. To fix this, you will need to straighten the bar.
The chain is worn out. If the chain is worn out, it will not be able to grip the bar properly. To fix this, you will need to replace the chain.

How to Troubleshoot: Chainsaw Tension Screw Not Working

Symptoms of a Chainsaw Tension Screw That Isn’t Working

There are a few telltale signs that your chainsaw tension screw isn’t working properly. These include:

The chain is loose and slipping off the guide bar.
The chain is too tight and binding on the guide bar.
The chain is making a rattling noise.
The chain is not cutting properly.

Troubleshooting a Chainsaw Tension Screw

If you’re experiencing any of the symptoms listed above, it’s important to troubleshoot the problem as soon as possible to prevent further damage to your chainsaw. Here are a few steps to help you troubleshoot a chainsaw tension screw that isn’t working:

1. Check the chain tension. The first thing you need to do is check the chain tension to make sure it’s not too loose or too tight. To do this, simply grasp the chain with your fingers and pull it away from the guide bar. If the chain is loose enough to move more than 1/4 inch, it’s too loose. If the chain is so tight that it’s difficult to move, it’s too tight.
2. Adjust the tension screw. If the chain is too loose, you’ll need to tighten the tension screw. To do this, use a screwdriver or hex wrench to turn the tension screw clockwise. Be careful not to overtighten the screw, as this could damage the chain.
3. Recheck the chain tension. Once you’ve adjusted the tension screw, recheck the chain tension to make sure it’s correct. If the chain is still too loose or too tight, repeat steps 2 and 3 until the chain is properly tensioned.

Preventing Chainsaw Tension Screw Problems

The best way to prevent chainsaw tension screw problems is to keep your chainsaw properly maintained. This includes:

Inspecting the chain and tension screw regularly for wear and damage.
Tightening the tension screw according to the manufacturer’s instructions.
Replacing the chain and tension screw as needed.

By following these simple tips, you can help keep your chainsaw running smoothly and avoid costly repairs.

Additional Resources

[How to Adjust the Chain Tension on a Chainsaw](https://www.thesprucecrafts.com/how-to-adjust-the-chain-tension-on-a-chainsaw-591399)
[Chainsaw Chain Tension Screw Problems](https://www.hunker.com/13422393/chainsaw-chain-tension-screw-problems)
[How to Prevent Chainsaw Tension Screw Problems](https://www.familyhandyman.com/project/how-to-prevent-chainsaw-tension-screw-problems/)

FAQs: Chainsaw Tension Screw Not Working

Why is my chainsaw tension screw not working?

There are a few possible reasons why your chainsaw tension screw might not be working. Here are some of the most common causes:

The screw is too tight. If the screw is too tight, it can prevent the chain from moving freely. This can cause the chain to jump off the bar, which can be dangerous.
The screw is too loose. If the screw is too loose, it can allow the chain to move too freely. This can cause the chain to come off the bar, which can also be dangerous.
The screw is damaged. If the screw is damaged, it may not be able to grip the chain properly. This can also cause the chain to come off the bar.
The chainsaw is not properly lubricated. If the chainsaw is not properly lubricated, the chain can become sticky and difficult to move. This can make it difficult to tighten the tension screw.

How do I fix a chainsaw tension screw that is not working?

To fix a chainsaw tension screw that is not working, you will need to identify the cause of the problem and take the appropriate steps to fix it. Here are some steps to help you troubleshoot the problem:

1. Check the tightness of the screw. If the screw is too tight, loosen it slightly. If the screw is too loose, tighten it slightly.
2. Inspect the screw for damage. If the screw is damaged, replace it with a new one.
3. Lubricate the chainsaw. Apply a light coat of oil to the chain and bar.

Once you have identified and fixed the problem, you should be able to tighten the tension screw and get your chainsaw back to work.

How often should I tighten the tension screw on my chainsaw?

The frequency with which you need to tighten the tension screw on your chainsaw will depend on how often you use it and the conditions in which you use it. In general, you should tighten the tension screw whenever you notice that the chain is starting to come off the bar. You should also tighten the tension screw if the chain is making a lot of noise or if it is not cutting properly.

What happens if I don’t tighten the tension screw on my chainsaw?

If you do not tighten the tension screw on your chainsaw, the chain can come off the bar. This can be dangerous, as the chain can fly towards you or someone else. In addition, a loose chain can damage the bar and the chainsaw itself.

How can I prevent my chainsaw tension screw from coming loose?

There are a few things you can do to prevent your chainsaw tension screw from coming loose:

Tighten the screw securely. Make sure that the screw is tightened all the way down.
Use a locking compound. Apply a small amount of locking compound to the threads of the screw. This will help to keep the screw in place.
Inspect the screw regularly. Check the screw regularly to make sure that it is still tight. If the screw is loose, tighten it as needed.

By following these tips, you can help to prevent your chainsaw tension screw from coming loose and causing damage to your chainsaw.

Next Post to Read: Craftsman Chainsaw Chain Oiler Not Working