How to Fix
If your Chicago Electric 12 miter saw laser is not working, don’t worry, you’re not alone. This is a common problem that can be fixed quickly and easily. In this blog post, we will walk you through the steps on how to troubleshoot and fix a Chicago Electric 12 miter saw laser that is not working.
We’ll start by taking a look at the most common causes of this problem, and then we’ll provide step-by-step instructions on how to fix each one. By the end of this post, you’ll have your miter saw laser up and running in no time!
So Chicago Electric 12 Miter Saw Laser Not Working
1. Turn off the saw and unplug it:
2. Remove the four screws that hold the laser housing in place:
3. Disconnect the electrical connector from the laser:
4. Inspect the laser for damage:
5. Replace the laser if necessary:
Chicago Electric 12 Miter Saw Laser Not Working
Symptoms
There are a few different symptoms that you may experience if your Chicago Electric 12 miter saw laser is not working properly. These include:
The laser does not come on at all
The laser is not aligned with the blade
The laser is flickering or moving erratically
The laser is not bright enough
Causes
There are a number of different things that could cause your Chicago Electric 12 miter saw laser to stop working. These include:
A loose or damaged wire
A faulty laser diode
A problem with the power supply
A problem with the control board
Solutions
The solution to your problem will depend on the cause of the issue. Here are a few things you can try:
Check the wires:
Make sure that the wires leading to the laser are securely connected. If they are loose, reconnect them and see if that fixes the problem.
Replace the laser diode:
If the laser diode is faulty, you will need to replace it. This is a relatively simple process, but you will need to purchase a replacement diode.
Check the power supply:
If the power supply is not working properly, you will need to replace it. This is a more complex process, and you may want to have a professional do it for you.
Check the control board:
If the control board is faulty, you will need to replace it. This is a very complex process, and you should only attempt it if you are confident in your abilities.
Conclusion
If you are having trouble with your Chicago Electric 12 miter saw laser, you can usually fix the problem by following the steps in this article. However, if you are not comfortable doing this type of repair, you may want to take your saw to a professional for help.
Also Read THis: Chicago Electric 2 Blade Saw Won’T Start
FAQs: Chicago Electric 12 Miter Saw Laser Not Working
Why is my Chicago Electric 12 Miter Saw Laser not working?
There are a few possible reasons why your Chicago Electric 12 Miter Saw Laser may not be working. Here are some of the most common causes and solutions:
The laser is not turned on: Make sure that the laser is turned on by pressing the power button.
The laser is not aligned with the blade: The laser should be aligned with the blade so that it projects a beam of light onto the workpiece. To align the laser, follow the instructions in the owner’s manual.
The laser is dirty: The laser can become dirty over time, which can interfere with its operation. To clean the laser, use a soft cloth to wipe it down.
The laser is broken: If the laser is not working after you have tried the above solutions, it may be broken. In this case, you will need to contact the manufacturer for a replacement.
How do I turn on the laser on my Chicago Electric 12 Miter Saw?
To turn on the laser on your Chicago Electric 12 Miter Saw, follow these steps:
1. Press the power button on the saw.
2. Press the laser button on the saw.
The laser should now be turned on.
How do I align the laser on my Chicago Electric 12 Miter Saw?
To align the laser on your Chicago Electric 12 Miter Saw, follow these steps:
1. Turn on the saw and the laser.
2. Place a piece of scrap wood on the saw table.
3. Align the laser so that it projects a beam of light onto the edge of the scrap wood.
4. Tighten the lock screw on the laser to secure it in place.
The laser should now be aligned with the blade.
How do I clean the laser on my Chicago Electric 12 Miter Saw?
To clean the laser on your Chicago Electric 12 Miter Saw, follow these steps:
1. Turn off the saw and unplug it from the power outlet.
2. Use a soft cloth to wipe down the laser.
3. Be careful not to touch the laser lens with your fingers, as this could damage the laser.
The laser should now be clean.
What should I do if my Chicago Electric 12 Miter Saw Laser is broken?
If your Chicago Electric 12 Miter Saw Laser is broken, you should contact the manufacturer for a replacement. You can find the manufacturer’s contact information in the owner’s manual.
