Your Chicago Electric circular saw is a powerful tool that can be used for a variety of tasks, from cutting wood to metal. But what happens when your circular saw won’t turn on This is a common problem, and there are a few things you can check to troubleshoot the issue.
In this blog post, we will discuss the most common reasons why a , and we will provide step-by-step instructions on how to fix the problem. We will also provide some tips on how to prevent this issue from happening in the future.
So Chicago Electric Circular Saw Won’T Turn On
How to Fix a Chicago Electric Circular Saw That Won’t Turn On
1. Make sure the saw is plugged in and turned on.
2. Check the fuse. If the fuse is blown, replace it.
3. Check the switch. If the switch is faulty, replace it.
4. Check the wiring. If the wiring is damaged, repair or replace it.
5. Clean the saw’s contacts. If the contacts are dirty, clean them with a dry cloth.
6. Inspect the saw’s motor. If the motor is damaged, replace it.
Chicago Electric Circular Saw Won’t Turn On
Troubleshooting
If your Chicago Electric circular saw won’t turn on, there are a few things you can check to troubleshoot the problem.
Check the power cord:
Make sure that the power cord is plugged into an outlet and that the outlet is working. You can test the outlet by plugging in another appliance.
Check the switch:
Make sure that the switch is turned on. If the switch is in the off position, the saw will not turn on.
Check the fuse:
If your saw has a fuse, it may have blown. To check the fuse, look for a small, clear plastic or glass tube in the saw. If the fuse is black or blown out, it will need to be replaced.
Check the motor:
If the saw’s motor is not working, it will not turn on. To check the motor, you can use a multimeter to test for continuity. If there is no continuity, the motor will need to be replaced.
How to Repair a Chicago Electric Circular Saw
If you have determined that the problem with your Chicago Electric circular saw is a blown fuse or a faulty motor, you can repair the saw yourself.
To replace a blown fuse, follow these steps:
1. Turn off the saw and unplug it from the outlet.
2. Locate the fuse in the saw. It is typically a small, clear plastic or glass tube.
3. Remove the fuse by carefully prying it out of its holder.
4. Replace the fuse with a new one that has the same amperage rating.
5. Reattach the fuse to its holder.
6. Plug the saw back in and turn it on.
To replace a faulty motor, follow these steps:
1. Turn off the saw and unplug it from the outlet.
2. Remove the saw’s housing.
3. Locate the motor. It is typically a large, cylindrical object.
4. Disconnect the motor from the saw’s electrical system.
5. Remove the old motor.
6. Install the new motor.
7. Reconnect the motor to the saw’s electrical system.
8. Reattach the saw’s housing.
9. Plug the saw back in and turn it on.
Conclusion
If you are unable to troubleshoot or repair your Chicago Electric circular saw yourself, you can take it to a qualified repair shop.
Also Read THis: Chicago Electric Miter Saw Not Working
FAQs: Chicago Electric Circular Saw Won’t Turn On
Why won’t my Chicago Electric circular saw turn on?
There are a few possible reasons why your Chicago Electric circular saw won’t turn on. Here are some of the most common causes:
The saw is not plugged in properly: Make sure that the saw is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
The saw’s switch is turned off: Check to make sure that the switch is turned to the On position.
The saw’s battery is dead: If the saw is battery-powered, make sure that the battery is charged and properly inserted into the saw.
The saw’s motor is burned out: If the saw has been used for a long time, it is possible that the motor has burned out. In this case, you will need to replace the motor.
The saw’s electrical cord is damaged: If the saw’s electrical cord is damaged, it will not be able to power the saw. In this case, you will need to replace the electrical cord.
What should I do if my Chicago Electric circular saw won’t turn on?
If your Chicago Electric circular saw won’t turn on, here are a few things you can try:
1. Check the power outlet: Make sure that the outlet is working and that the plug is securely inserted into the outlet.
2. Check the switch: Make sure that the switch is turned to the On position.
3. Check the battery: If the saw is battery-powered, make sure that the battery is charged and properly inserted into the saw.
4. Inspect the motor: If the saw has been used for a long time, it is possible that the motor has burned out. In this case, you will need to replace the motor.
5. Inspect the electrical cord: If the saw’s electrical cord is damaged, it will not be able to power the saw. In this case, you will need to replace the electrical cord.
How can I prevent my Chicago Electric circular saw from not turning on?
There are a few things you can do to prevent your Chicago Electric circular saw from not turning on:
Always unplug the saw when you are not using it: This will help to prevent the saw from accidentally turning on and causing an injury.
Be careful not to drop the saw: Dropping the saw can damage the internal components, which could prevent the saw from turning on.
Inspect the saw regularly for damage: If you see any damage to the saw, such as a broken switch or a damaged electrical cord, have the saw repaired or replaced before using it again.
Store the saw in a safe place: Store the saw in a place where it is not likely to be damaged, such as a tool cabinet or a garage.
What are the signs that my Chicago Electric circular saw needs to be repaired or replaced?
If your Chicago Electric circular saw is not working properly, there are a few signs that it may need to be repaired or replaced. These signs include:
The saw will not turn on.
The saw makes strange noises when it is turned on.
The saw’s motor overheats.
The saw’s blade is dull.
The saw’s blade is cracked or damaged.
If you see any of these signs, it is important to have the saw repaired or replaced as soon as possible.
Where can I get my Chicago Electric circular saw repaired or replaced?
If your Chicago Electric circular saw needs to be repaired or replaced, you can take it to a local authorized service center. You can also contact Chicago Electric customer service for assistance.
