Craftsman Incredi-Pull 55Cc Chainsaw Chain Oiler Not Working

As a chainsaw repair professional, I have seen many cases of the . This can be a frustrating and inconvenient problem, as it can prevent the chainsaw from being used properly. However, it is usually a simple fix that can be completed in a few minutes. In this guide, I will walk you through the steps to troubleshoot and repair the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw.

Most Common Reasons Of Craftsman Incredi-Pull 55Cc Chainsaw Chain Oiler Not Working

Chainsaw Chain Oiler Not Working

Chainsaw Chain Oiler Hose Clogged

The most common reason for a chainsaw chain oiler not working is a clogged hose. This can be caused by dirt, sawdust, or other debris getting into the hose and blocking the flow of oil. To fix this problem, you will need to remove the hose from the chainsaw and clean it with a solvent such as denatured alcohol.

Chainsaw Chain Oiler Pump Not Working

If the chainsaw chain oiler hose is not clogged, the next thing to check is the pump. The pump is responsible for pushing oil through the hose and onto the chain. If the pump is not working, you will need to replace it.

Chainsaw Chain Oiler Oil Level Low

If the chainsaw chain oiler pump is working, but the chain is still not getting lubricated, the oil level may be low. To check the oil level, remove the oil cap and look inside the oil reservoir. If the oil level is low, you will need to add more oil.

Chainsaw Chain Oiler Switch Not Working

The chainsaw chain oiler switch is responsible for turning the oiler on and off. If the switch is not working, the oiler will not be able to function properly. To fix this problem, you will need to replace the switch.

Chainsaw Chain Oiler O-Ring Damaged

The chainsaw chain oiler O-ring is a small rubber ring that seals the oiler housing. If the O-ring is damaged, it can allow oil to leak out of the housing and prevent the chain from being lubricated. To fix this problem, you will need to replace the O-ring.

How to Troubleshoot: Craftsman Incredi-Pull 55cc Chainsaw Chain Oiler Not Working

Symptoms

There are a few different symptoms that you may experience if the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw is not working properly. These include:

The chain is not being lubricated properly, which can lead to it overheating and becoming damaged.
The chain is smoking or sparking, which is a sign that it is overheating.
The chain is making a loud noise, which is also a sign that it is overheating.
The chain is skipping or jumping, which is a sign that it is not properly lubricated.

Troubleshooting

If you are experiencing any of the symptoms listed above, there are a few things you can check to troubleshoot the problem.

1. Check the oil level. The first thing you should do is check the oil level in the chain oiler. To do this, remove the oil cap and look inside. The oil level should be between the full and add marks on the side of the oiler. If the oil level is low, add more oil to the reservoir.

2. Check the oil line. The next thing you should check is the oil line. The oil line runs from the oiler to the chain. If the oil line is kinked or blocked, it will prevent oil from reaching the chain. To check the oil line, follow it from the oiler to the chain. Make sure that there are no kinks or obstructions in the line. If you find a kink or obstruction, you will need to replace the oil line.

3. Check the oil pump. The oil pump is responsible for pumping oil from the reservoir to the chain. If the oil pump is not working properly, it will not be able to deliver oil to the chain. To check the oil pump, start the chainsaw and let it run for a few minutes. While the chainsaw is running, look at the oil line. If the oil line is not pumping oil, the oil pump is not working properly. You will need to replace the oil pump.

4. Check the oil filter. The oil filter is located in the oiler. The oil filter helps to keep dirt and debris from getting into the oil system. If the oil filter is clogged, it will restrict the flow of oil to the chain. To check the oil filter, remove the oil filter from the oiler. Look at the filter. If the filter is clogged, you will need to replace it.

5. Check the carburetor. The carburetor is responsible for mixing air and fuel. If the carburetor is not adjusted properly, it can cause the chain oiler to not work properly. To check the carburetor, you will need to adjust the carburetor according to the manufacturer’s instructions.

6. Take the chainsaw to a qualified service center. If you have checked all of the above and the chain oiler is still not working, you will need to take the chainsaw to a qualified service center. A qualified technician will be able to diagnose the problem and repair the chainsaw.

Prevention

You can help prevent problems with your Craftsman Incredi-Pull 55cc chainsaw chain oiler by following these tips:

Keep the oil level in the chain oiler full.
Check the oil line for kinks or obstructions.
Clean the oil pump and oil filter regularly.
Adjust the carburetor according to the manufacturer’s instructions.
Take the chainsaw to a qualified service center for regular maintenance.

By following these tips, you can help keep your Craftsman Incredi-Pull 55cc chainsaw chain oiler working properly.

FAQs: Craftsman Incredi-Pull 55cc Chainsaw Chain Oiler Not Working

Why isn’t the chain oiler working on my Craftsman Incredi-Pull 55cc chainsaw?

There are a few possible reasons why the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw might not be working. Here are some of the most common causes:

The oiler is not turned on. Make sure that the oiler switch is in the On position.
The oiler reservoir is empty. Check the oiler reservoir and fill it up with chainsaw oil if necessary.
The oiler hose is clogged. Remove the oiler hose from the chainsaw and clean it with a small brush.
The oiler pump is not working properly. If the oiler pump is not working properly, you may need to replace it.

How do I turn on the chain oiler on my Craftsman Incredi-Pull 55cc chainsaw?

To turn on the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw, locate the oiler switch on the side of the chainsaw. The switch is a small lever that is either in the On position or the Off position. To turn on the oiler, move the switch to the On position.

How do I check the oil level in the chain oiler on my Craftsman Incredi-Pull 55cc chainsaw?

To check the oil level in the chain oiler on your Craftsman Incredi-Pull 55cc chainsaw, locate the oiler reservoir on the side of the chainsaw. The oiler reservoir is a clear plastic container with a fill line. To check the oil level, remove the cap from the oiler reservoir and look at the level of the oil. The oil level should be between the Full and Add Oil marks on the side of the reservoir.

How do I clean the chain oiler hose on my Craftsman Incredi-Pull 55cc chainsaw?

To clean the chain oiler hose on your Craftsman Incredi-Pull 55cc chainsaw, follow these steps:

1. Remove the oiler hose from the chainsaw.
2. Use a small brush to clean out the inside of the hose.
3. Reattach the oiler hose to the chainsaw.

How do I replace the chain oiler pump on my Craftsman Incredi-Pull 55cc chainsaw?

To replace the chain oiler pump on your Craftsman Incredi-Pull 55cc chainsaw, follow these steps:

1. Remove the old oiler pump from the chainsaw.
2. Install the new oiler pump on the chainsaw.
3. Reconnect the oiler hose to the chainsaw.

Note: If you are not comfortable performing these repairs, it is best to take your chainsaw to a qualified service technician.

Next Post You May Like: Dewalt 60V Chainsaw Not Working