As a Pressure Washer Repair Technician, I have seen my fair share of Craftsman pressure washers that aren’t working. I know how frustrating it can be when your pressure washer isn’t working, especially when you need it to clean your car or power wash your deck. That’s why I’ve put together this troubleshooting guide to help you quickly diagnose and resolve the problem.
In this guide, I’ll cover the most common reasons why Craftsman pressure washers don’t work, as well as the steps you can take to fix them. I’ll also provide tips on how to prevent future problems.
So if your Craftsman pressure washer isn’t working, don’t despair. Just follow the steps in this guide and you’ll be back to cleaning in no time.
Why Craftsman Pressure Washer Not Working
No Power
The pressure washer is not plugged in or the power cord is damaged.
The pressure washer’s circuit breaker is tripped.
The pressure washer’s motor is burned out.
No Water
The water supply to the pressure washer is turned off.
The water hose is kinked or damaged.
The water filter is clogged.
Low Pressure
The pressure washer’s pump is not working properly.
The pressure washer’s nozzle is clogged.
The pressure washer’s hose is too long or has too many bends.
Other Problems
The pressure washer is leaking.
The pressure washer is making strange noises.
The pressure washer is smoking.
How to Troubleshoot And Fix: Craftsman Pressure Washer Not Working
Symptoms of a Craftsman Pressure Washer Not Working
There are a few different symptoms that may indicate that your Craftsman pressure washer is not working properly. These include:
The pressure washer won’t start
The pressure washer starts but doesn’t build pressure
The pressure washer leaks
The pressure washer makes strange noises
The pressure washer doesn’t spray water
Troubleshooting a Craftsman Pressure Washer Not Working
If your Craftsman pressure washer is not working properly, you can try troubleshooting the problem yourself. Here are a few steps to follow:
1. Check the power supply:
Make sure that the pressure washer is plugged in and turned on. If it is plugged in and turned on, but still not working, check the circuit breaker to make sure that it is not tripped.
2. Check the oil level:
If the oil level is low, add oil to the pressure washer until the level is up to the full mark.3. Check the air filter:
If the air filter is dirty, it can restrict the airflow to the engine and cause the pressure washer to not start. Remove the air filter and clean it with a clean, dry cloth.
4. Check the spark plug:
If the spark plug is fouled or damaged, it can cause the pressure washer to not start. Remove the spark plug and inspect it. If it is fouled or damaged, replace it with a new spark plug.
5. Check the fuel line:
If the fuel line is clogged, it can prevent the pressure washer from getting fuel. Inspect the fuel line for any kinks or blockages. If you find a blockage, clear it out.
6. Check the fuel filter:
If the fuel filter is clogged, it can restrict the flow of fuel to the engine and cause the pressure washer to not start. Remove the fuel filter and inspect it. If it is clogged, replace it with a new fuel filter.
7. Check the carburetor:
If the carburetor is dirty or out of adjustment, it can cause the pressure washer to not start or run properly. Clean the carburetor according to the manufacturer’s instructions. If you are not comfortable cleaning the carburetor, you can take it to a qualified technician for service.
8. Check the engine:
If the engine is damaged, it can prevent the pressure washer from starting or running properly. If you suspect that the engine is damaged, you should take it to a qualified technician for diagnosis and repair.
Fixing a Craftsman Pressure Washer Not Working
Once you have identified the problem with your Craftsman pressure washer, you can fix it yourself or take it to a qualified technician for service. Here are a few tips for fixing a Craftsman pressure washer not working:
If the pressure washer won’t start, check the power supply, oil level, air filter, spark plug, fuel line, fuel filter, and carburetor:
If the pressure washer starts but doesn’t build pressure, check the water inlet valve, water pump, and pressure regulator:
If the pressure washer leaks, check the water inlet valve, water pump, and pressure hose:
If the pressure washer makes strange noises, check the water pump and pressure hose:
If the pressure washer doesn’t spray water, check the water inlet valve, water pump, and pressure hose:
By following these tips, you can troubleshoot and fix a Craftsman pressure washer not working. If you are not comfortable troubleshooting or fixing the pressure washer yourself, you can take it to a qualified technician for service.
FAQs: Craftsman Pressure Washer Not Working
Why is my Craftsman pressure washer not working?
There are a few possible reasons why your Craftsman pressure washer might not be working. Here are some of the most common causes:
The pump is not getting enough water: Make sure that the water supply is turned on and that the hose is connected properly to the pump. If the water supply is turned off or the hose is not connected properly, the pump will not be able to generate enough pressure to power the spray nozzle.
The pump is clogged: If the pump is clogged with dirt or debris, it will not be able to generate enough pressure to power the spray nozzle. To clean the pump, remove the air filter and the inlet screen and rinse them with water. If the pump is still clogged, you may need to disassemble it and clean the impeller and other internal parts.
The pressure regulator is not working properly: The pressure regulator controls the amount of pressure that the pump generates. If the pressure regulator is not working properly, the pump may not be able to generate enough pressure to power the spray nozzle. To check the pressure regulator, turn on the water supply and the pressure washer and listen for the sound of the pump. If the pump is running but the spray nozzle is not producing any pressure, the pressure regulator may be faulty.
The spray nozzle is clogged: If the spray nozzle is clogged with dirt or debris, it will not be able to produce any pressure. To clean the spray nozzle, remove it from the gun and rinse it with water. If the spray nozzle is still clogged, you may need to use a toothpick or a needle to remove the debris.
How do I fix my Craftsman pressure washer?
To fix your Craftsman pressure washer, you will need to identify the cause of the problem. Once you have identified the cause of the problem, you can follow the steps below to fix it:
If the pump is not getting enough water, make sure that the water supply is turned on and that the hose is connected properly to the pump. If the water supply is turned off or the hose is not connected properly, the pump will not be able to generate enough pressure to power the spray nozzle.
If the pump is clogged, remove the air filter and the inlet screen and rinse them with water. If the pump is still clogged, you may need to disassemble it and clean the impeller and other internal parts.
If the pressure regulator is not working properly, you will need to replace it. To replace the pressure regulator, turn off the water supply and disconnect the hose from the pump. Remove the old pressure regulator and install the new one.
If the spray nozzle is clogged, remove it from the gun and rinse it with water. If the spray nozzle is still clogged, you may need to use a toothpick or a needle to remove the debris.
What are the common problems with Craftsman pressure washers?
The most common problems with Craftsman pressure washers include:
The pump is not getting enough water: This is usually caused by a clogged water filter or a kinked hose.
The pump is clogged: This can be caused by dirt or debris getting into the pump.
The pressure regulator is not working properly: This can cause the pressure washer to produce too much or too little pressure.
The spray nozzle is clogged: This can prevent the pressure washer from producing any pressure.
How can I prevent problems with my Craftsman pressure washer?
To prevent problems with your Craftsman pressure washer, you can follow these tips:
Always use the correct water pressure for the job: Using too much pressure can damage the surface you are cleaning.
Never use the pressure washer to clean delicate surfaces: This can damage the surface.
Clean the pressure washer regularly: This will help to prevent clogs and other problems.
Store the pressure washer properly: This will help to protect it from damage.
What is the best way to clean a Craftsman pressure washer?
To clean a Craftsman pressure washer, you can follow these steps:
1. Turn off the pressure washer and disconnect the hose from the pump.
2. Remove the air filter and the inlet screen and rinse them with water.
3. If the pump is clogged, remove the inlet screen and the impeller and clean them with a brush.
4. If the pressure regulator is not working properly, you will need to replace it.
5. If the spray nozzle is clogged, remove it from
Next Post To Read: Craftsman Pressure Washer Pump Not Working
