As a Pressure Washer Repair Technician, I’ve seen my fair share of craftsman pressure washer soap dispenser problems. It’s one of the most common issues that homeowners experience, and it can be incredibly frustrating. Not only does it prevent you from using your pressure washer to clean your home or property, but it can also be a safety hazard.
That’s why I’ve put together this troubleshooting guide. I’ll walk you through the steps to quickly diagnose and resolve the problem, so you can get your pressure washer back up and running in no time.
In this guide, I’ll cover the following topics:
What causes a craftsman pressure washer soap dispenser to stop working
How to troubleshoot a craftsman pressure washer soap dispenser problem
How to repair a craftsman pressure washer soap dispenser
Why Craftsman Pressure Washer Soap Dispenser Not Working
Nozzle clogged
The most common reason for a pressure washer soap dispenser not working is a clogged nozzle. This can be caused by dirt, debris, or soap buildup.
To fix this, remove the nozzle and clean it with a small brush or needle.
Low pressure
If the pressure washer is not producing enough pressure, the soap may not be able to reach the nozzle.
To check the pressure, look at the pressure gauge on the pressure washer. If the pressure is below 2000 PSI, it is not enough to properly dispense soap.
To increase the pressure, you can try opening the water valve wider or adjusting the pressure regulator.
Defective soap dispenser
In some cases, the soap dispenser itself may be defective. This can be caused by a broken or worn-out gasket, a faulty valve, or a clogged hose.
If you suspect that the soap dispenser is defective, you will need to replace it.
How to Troubleshoot And Fix: Craftsman Pressure Washer Soap Dispenser Not Working
Symptoms of a Craftsman Pressure Washer Soap Dispenser Not Working
There are a few different symptoms that you might notice if your Craftsman pressure washer soap dispenser is not working properly. These include:
The soap dispenser does not dispense any soap when you press the trigger.
The soap dispenser leaks soap when you are not using it.
The soap dispenser makes a loud noise when you are using it.
The soap dispenser is not aligned with the spray nozzle.
Troubleshooting a Craftsman Pressure Washer Soap Dispenser
If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself before calling a professional. Here are a few things you can check:
Check the soap reservoir:
Make sure that the soap reservoir is filled with soap and that the lid is tightly closed.
Check the soap dispenser hose:
Make sure that the hose is not kinked or blocked.
Check the soap dispenser nozzle:
Make sure that the nozzle is not clogged.
Check the soap dispenser pump:
The soap dispenser pump may be faulty if it is not dispensing any soap or if it is making a loud noise. You can try replacing the pump or contacting a professional for help.
How to Fix a Craftsman Pressure Washer Soap Dispenser
If you have checked all of the above and the problem persists, you may need to fix the soap dispenser. Here are a few steps on how to fix a Craftsman pressure washer soap dispenser:
1. Turn off the pressure washer and disconnect the hose from the gun:
2. Remove the soap reservoir lid:
3. Locate the soap dispenser pump:
The soap dispenser pump is usually located on the side of the pressure washer.
4. Remove the soap dispenser pump cover:
The soap dispenser pump cover is usually held in place by a few screws.
5. Inspect the soap dispenser pump:
Look for any signs of damage or wear.
6. Replace the soap dispenser pump if necessary:
You can purchase a replacement soap dispenser pump from a Craftsman parts dealer.
7. Reassemble the soap dispenser pump:
8. Reattach the soap reservoir lid:
9. Reconnect the hose to the gun:
10. Turn on the pressure washer and test the soap dispenser:
The soap dispenser should now be working properly.
Preventing Craftsman Pressure Washer Soap Dispenser Problems
You can help prevent Craftsman pressure washer soap dispenser problems by following these tips:
Keep the soap reservoir filled with soap:
A full soap reservoir will help to prevent the soap dispenser from becoming clogged.
Empty the soap reservoir after each use:
This will help to prevent the soap from becoming stagnant and growing mold.
Clean the soap dispenser regularly:
Cleaning the soap dispenser will help to remove any dirt or debris that could clog the dispenser.
Use the correct type of soap:
Not all soaps are created equal. Make sure to use a soap that is specifically designed for pressure washers.
By following these tips, you can help to prevent Craftsman pressure washer soap dispenser problems and keep your pressure washer running smoothly.
FAQs: Craftsman Pressure Washer Soap Dispenser Not Working
Why is my Craftsman pressure washer soap dispenser not working?
There are a few possible reasons why your Craftsman pressure washer soap dispenser may not be working. Here are a few of the most common causes:
The soap dispenser is clogged: If the soap dispenser is clogged, it will not be able to dispense soap properly. To fix this, you can try to clear the clog by using a small brush or by flushing the dispenser with water.
The soap dispenser is not getting enough water: If the soap dispenser is not getting enough water, it will not be able to dispense soap properly. To fix this, you can try to increase the water pressure or by adjusting the water flow rate.
The soap dispenser is not turned on: If the soap dispenser is not turned on, it will not be able to dispense soap. To fix this, you can check to make sure that the dispenser is turned on and that the power cord is plugged in.
The soap dispenser is not compatible with your pressure washer: If the soap dispenser is not compatible with your pressure washer, it will not be able to dispense soap properly. To fix this, you can try to find a soap dispenser that is compatible with your pressure washer.
How do I fix a clogged Craftsman pressure washer soap dispenser?
To fix a clogged Craftsman pressure washer soap dispenser, you can try to clear the clog by using a small brush or by flushing the dispenser with water. Here are the steps:
1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the soap dispenser from the pressure washer.
3. Use a small brush or a toothpick to loosen any clogs in the dispenser.
4. Flush the dispenser with water until the water runs clear.
5. Reattach the soap dispenser to the pressure washer.
6. Turn on the pressure washer and test the soap dispenser.
How do I increase the water pressure for my Craftsman pressure washer soap dispenser?
To increase the water pressure for your Craftsman pressure washer soap dispenser, you can try to increase the water pressure or by adjusting the water flow rate. Here are the steps:
1. Turn off the pressure washer and disconnect the hose from the gun.
2. Locate the water pressure regulator on the pressure washer.
3. Turn the water pressure regulator clockwise to increase the water pressure or counterclockwise to decrease the water pressure.
4. Reattach the hose to the gun.
5. Turn on the pressure washer and test the soap dispenser.
How do I turn on the soap dispenser on my Craftsman pressure washer?
To turn on the soap dispenser on your Craftsman pressure washer, you can follow these steps:
1. Turn on the pressure washer.
2. Locate the soap dispenser on the pressure washer.
3. Press the soap dispenser button.
The soap dispenser will now be turned on and will dispense soap when you spray the pressure washer.
How do I find a soap dispenser that is compatible with my Craftsman pressure washer?
To find a soap dispenser that is compatible with your Craftsman pressure washer, you can check the owner’s manual or the manufacturer’s website. You can also try to find a soap dispenser that is specifically designed for Craftsman pressure washers.
Next Post To Read: Craftsman Pressure Washer Soap Injector Not Working
