What to Do
Your Dewalt electric corded sabre saw is a powerful and versatile tool that can be used for a variety of tasks, from cutting wood to metal. But what happens when it suddenly stops working Don’t panic! In this blog post, we’ll troubleshoot the most common causes of a Dewalt sabre saw not running and show you how to fix them.
We’ll start by checking the power cord and outlet to make sure that there’s no damage or loose connections. Then, we’ll move on to the saw itself, checking the motor, switch, and blade. By the end of this post, you’ll be able to get your Dewalt sabre saw up and running again in no time.
So Dewalt Electric Corded Sabre Saw Won’T Run
DEWALT Corded Sabre Saw Won’t Run: How to Fix It
If your DEWALT corded sabre saw won’t run, here are a few things you can check:
1. Make sure the saw is plugged in and turned on:
2. Check the power cord for damage:
3. Check the switch for damage:
4. Clean the carbon brushes:
5. Replace the starter capacitor:
6. Replace the motor:
If you have checked all of these things and the saw still won’t run, it is likely that the problem is with the motor and you will need to take it to a qualified repair technician.
Dewalt Electric Corded Sabre Saw Won’t Run
Troubleshooting
If your Dewalt electric corded sabre saw won’t run, there are a few things you can check to troubleshoot the problem.
Check the power cord:
Make sure that the power cord is plugged in securely to both the saw and the outlet. Try a different outlet to rule out a problem with the outlet.
Check the switch:
Make sure that the switch is turned on. Try flipping the switch to the On position and then back to the Off position.
Check the fuse:
If your saw has a fuse, check to make sure that it is not blown. If the fuse is blown, you will need to replace it.
Check the brushes:
The brushes are located inside the motor. If the brushes are worn out, they will need to be replaced.
Check the motor:
If the motor is not working, it will need to be repaired or replaced.
How to Repair a Dewalt Electric Corded Sabre Saw
If you have checked the power cord, switch, fuse, brushes, and motor and the saw still won’t run, you will need to take it to a qualified repair technician.
Preventative Maintenance
To help prevent your Dewalt electric corded sabre saw from breaking down, you should perform regular preventative maintenance. This includes:
Cleaning the saw after each use.
Lubricating the saw according to the manufacturer’s instructions.
Replacing the brushes when they are worn out.
Having the saw serviced by a qualified repair technician annually.
By following these tips, you can help extend the life of your Dewalt electric corded sabre saw.
Also Read THis: Do Electric Chain Saw Work
FAQs: Dewalt Electric Corded Sabre Saw Won’t Run
Why won’t my Dewalt electric corded sabre saw run?
There are a few possible reasons why your Dewalt electric corded sabre saw might not be running. Here are some of the most common causes:
The saw is not plugged in properly: Make sure that the saw is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
The saw’s power switch is turned off: Check to make sure that the power switch is turned on.
The saw’s battery is dead: If the saw is battery-powered, check to make sure that the battery is charged and properly inserted into the saw.
The saw’s motor is jammed: If the saw is jammed, you may need to take it to a qualified technician to have it repaired.
The saw’s belt is broken: If the saw’s belt is broken, you will need to replace it.
How do I troubleshoot a Dewalt electric corded sabre saw that won’t run?
If your Dewalt electric corded sabre saw won’t run, you can troubleshoot the problem by following these steps:
1. Check the power cord: Make sure that the saw is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
2. Check the power switch: Make sure that the power switch is turned on.
3. Check the battery: If the saw is battery-powered, check to make sure that the battery is charged and properly inserted into the saw.
4. Check the motor: If the saw is jammed, you may need to take it to a qualified technician to have it repaired.
5. Check the belt: If the saw’s belt is broken, you will need to replace it.
How do I fix a Dewalt electric corded sabre saw that won’t run?
If your Dewalt electric corded sabre saw won’t run, you can fix the problem by following these steps:
1. Check the power cord: Make sure that the saw is plugged into an outlet that is working and that the plug is securely inserted into the outlet.
2. Check the power switch: Make sure that the power switch is turned on.
3. Check the battery: If the saw is battery-powered, check to make sure that the battery is charged and properly inserted into the saw.
4. Check the motor: If the saw is jammed, you may need to take it to a qualified technician to have it repaired.
5. Check the belt: If the saw’s belt is broken, you will need to replace it.
What are the safety precautions I should take when using a Dewalt electric corded sabre saw?
When using a Dewalt electric corded sabre saw, you should take the following safety precautions:
Wear safety glasses to protect your eyes from flying debris:
Wear gloves to protect your hands from the saw blade:
Stand in a stable position and keep your feet shoulder-width apart:
Do not overreach when using the saw:
Never cut wet or oily materials:
Never use the saw if it is damaged:
Keep the saw clean and free of debris:
Where can I find a replacement belt for my Dewalt electric corded sabre saw?
You can find a replacement belt for your Dewalt electric corded sabre saw at your local hardware store or online. When choosing a replacement belt, make sure that it is the correct size and type for your saw.
