As a Pressure Washer Repair Technician, I have seen my fair share of DeWalt pressure washers that are not dispensing soap. This can be a frustrating and inconvenient problem for homeowners, as it can prevent them from cleaning their homes and property effectively.
In this troubleshooting guide, I will walk you through the steps to diagnose and resolve the issue of your DeWalt pressure washer not dispensing soap. I will also provide tips on how to prevent this problem from happening in the future.
By following these steps, you can quickly and easily get your DeWalt pressure washer back to working order so that you can enjoy its many benefits.
Why Dewalt Pressure Washer Soap Not Working
Incorrect soap type:
The soap you are using may not be compatible with your Dewalt pressure washer. Make sure to use a soap that is specifically designed for pressure washers.
Incorrect soap concentration:
The soap you are using may be too concentrated or too diluted. The manufacturer’s instructions will specify the correct concentration of soap to use.
Clogged soap nozzle:
The soap nozzle on your pressure washer may be clogged, preventing the soap from being sprayed out. Clean the nozzle with a toothpick or needle to remove any obstructions.
Low water pressure:
If the water pressure is too low, the soap will not be able to be sprayed out of the nozzle. Check the water supply to make sure that it is turned on and flowing at a sufficient rate.
Faulty soap pump:
The soap pump on your pressure washer may be faulty, preventing the soap from being pumped to the nozzle. If you suspect that the soap pump is faulty, have it repaired or replaced by a qualified technician.
How to Troubleshoot and Fix: DeWalt Pressure Washer Soap Not Working
Symptoms
There are a few different symptoms that you may experience if your DeWalt pressure washer soap is not working properly. These include:
The soap dispenser not dispensing soap
The soap coming out of the pressure washer wand in a weak or inconsistent stream
The soap not sudsing up properly
The soap leaving a residue on your surfaces
Causes
There are a number of different things that could cause your DeWalt pressure washer soap to not work properly. These include:
The soap dispenser is clogged:
This is the most common cause of a pressure washer soap not working. The soap dispenser can become clogged with dirt, debris, or soap scum.
The soap is too thick:
If the soap is too thick, it will not be able to flow through the soap dispenser properly.
The soap is too thin:
If the soap is too thin, it will not suds up properly.
The pressure washer is not generating enough pressure:
If the pressure washer is not generating enough pressure, the soap will not be able to be sprayed out of the wand properly.
Troubleshooting
To troubleshoot the problem of your DeWalt pressure washer soap not working, you will need to first identify the cause of the problem. Once you have identified the cause, you can then take the necessary steps to fix the problem.
Clogged soap dispenser
If the soap dispenser is clogged, you will need to clean it out. To do this, follow these steps:
1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the soap dispenser from the pressure washer.
3. Use a small brush or pipe cleaner to clean out the inside of the soap dispenser.
4. Reattach the soap dispenser to the pressure washer.
Too thick or thin soap
If the soap is too thick or thin, you will need to adjust the consistency of the soap. To do this, follow these steps:
1. Add water to the soap container until the soap reaches the desired consistency.
2. Stir the soap until it is evenly mixed.
Not enough pressure
If the pressure washer is not generating enough pressure, you will need to increase the pressure. To do this, follow these steps:
1. Turn on the pressure washer and adjust the pressure setting to the highest setting.
2. Test the pressure by spraying the pressure washer on a piece of cardboard.
3. If the pressure is still not high enough, you may need to have the pressure washer serviced.
Prevention
To prevent your DeWalt pressure washer soap from not working properly, you can take the following steps:
Use the correct type of soap for your pressure washer.
Clean the soap dispenser regularly.
Adjust the consistency of the soap as needed.
Make sure that the pressure washer is generating enough pressure.
By following these tips, you can help to ensure that your DeWalt pressure washer soap works properly every time you use it.
FAQs: Dewalt Pressure Washer Soap Not Working
Why isn’t my Dewalt pressure washer soap working?
There are a few possible reasons why your Dewalt pressure washer soap might not be working. Here are some of the most common causes:
The soap dispenser is clogged: If the soap dispenser is clogged, it won’t be able to dispense soap properly. To fix this, you can try cleaning the dispenser with a degreaser or a vinegar and water solution.
The soap is too thick: If the soap is too thick, it won’t be able to flow through the dispenser properly. To fix this, you can try thinning the soap with water.
The pressure washer is not turned on high enough: The pressure washer needs to be turned on high enough to create enough pressure to push the soap through the hose and nozzle. To fix this, turn the pressure washer up to a higher setting.
The nozzle is clogged: If the nozzle is clogged, it won’t be able to spray the soap properly. To fix this, you can try cleaning the nozzle with a wire brush or a needle.
How do I clean the soap dispenser on my Dewalt pressure washer?
To clean the soap dispenser on your Dewalt pressure washer, you will need:
A degreaser or a vinegar and water solution
A rag or sponge
A pair of gloves
1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the soap dispenser from the pressure washer.
3. Pour the degreaser or vinegar and water solution into the soap dispenser.
4. Use the rag or sponge to clean the inside of the soap dispenser.
5. Rinse the soap dispenser with water.
6. Dry the soap dispenser with a towel.
7. Reattach the soap dispenser to the pressure washer.
How do I thin the soap for my Dewalt pressure washer?
To thin the soap for your Dewalt pressure washer, you will need:
The soap you want to thin
Water
A measuring cup
A spoon
1. Measure out the amount of soap you want to thin.
2. Add the same amount of water to the soap.
3. Stir the soap and water mixture until it is combined.
4. Use the soap mixture in your pressure washer.
How do I turn up the pressure on my Dewalt pressure washer?
To turn up the pressure on your Dewalt pressure washer, you will need:
The pressure washer
The pressure washer’s control panel
1. Turn on the pressure washer.
2. Locate the pressure washer’s control panel.
3. Find the pressure setting knob.
4. Turn the pressure setting knob to a higher setting.
How do I clean the nozzle on my Dewalt pressure washer?
To clean the nozzle on your Dewalt pressure washer, you will need:
A wire brush
A needle
A rag or sponge
1. Turn off the pressure washer and disconnect the hose from the gun.
2. Remove the nozzle from the gun.
3. Use the wire brush to clean the inside of the nozzle.
4. Use the needle to clean the small holes in the nozzle.
5. Use the rag or sponge to clean the outside of the nozzle.
6. Reattach the nozzle to the gun.
Next Post To Read: Easy Kleen Pressure Washer Burner Not Working
