Earthwise 16 Corded Chainsaw Not Working

As a chainsaw owner, you know that a properly functioning chainsaw is essential for safely and efficiently cutting through wood. However, one common problem that can occur with chainsaws is a tensioning issue. If the chain on your chainsaw is not properly tensioned, it can cause the chain to skip, jump, or even come off the saw altogether. This can be a dangerous and frustrating problem, as it can lead to injuries and damage to your saw.

In this guide, we will discuss the common causes of tensioning issues on Earthwise 16-inch corded chainsaws and provide steps on how to troubleshoot and resolve the problem. By following these steps, you can quickly and easily get your chainsaw back up and running in no time.

Most Common Reasons Of Earthwise 16 Corded Chainsaw Not Working

1. Clogged Air Filter

The air filter on a chainsaw helps to keep the engine clean by trapping dirt and debris. If the air filter becomes clogged, it can restrict airflow to the engine, causing it to run poorly or not at all. To clean the air filter, remove it from the chainsaw and rinse it with warm, soapy water. Allow the air filter to dry completely before reinstalling it.

2. Dirty Spark Plug

The spark plug is responsible for igniting the fuel in the engine. If the spark plug becomes dirty, it can cause the engine to misfire or not start at all. To clean the spark plug, remove it from the engine and use a spark plug cleaner to remove any dirt or deposits. Be sure to reinstall the spark plug in the correct orientation.

3. Bad Fuel

Old or stale fuel can cause a chainsaw to run poorly or not at all. If you suspect that the fuel is bad, drain the fuel tank and replace it with fresh fuel.

4. Carburetor Problems

The carburetor is responsible for mixing the fuel and air in the correct proportions. If the carburetor is not adjusted properly, it can cause the engine to run poorly or not at all. To adjust the carburetor, you will need to consult the owner’s manual for your chainsaw.

5. Worn or Damaged Parts

Over time, the parts on a chainsaw can wear out or become damaged. If any of the parts on your chainsaw are worn or damaged, it can cause the chainsaw to run poorly or not at all. To determine if any of the parts on your chainsaw are worn or damaged, you will need to take the chainsaw to a qualified repair shop.

How to Troubleshoot: Earthwise 16 Corded Chainsaw Not Working

Symptoms

There are a few different symptoms that may indicate that your Earthwise 16 corded chainsaw is not working properly. These include:

The chainsaw won’t start
The chainsaw starts but won’t stay running
The chainsaw runs but doesn’t produce enough power
The chainsaw makes a strange noise
The chainsaw is leaking oil

Causes

There are a number of different things that could cause your Earthwise 16 corded chainsaw to not work properly. These include:

A dirty or clogged air filter
A faulty spark plug
A problem with the carburetor
A problem with the fuel line
A problem with the engine

Troubleshooting

To troubleshoot your Earthwise 16 corded chainsaw, you will need to first identify the symptoms that your chainsaw is exhibiting. Once you have identified the symptoms, you can begin to troubleshoot the problem.

If the chainsaw won’t start:

Check the air filter to make sure that it is clean and free of debris.
Check the spark plug to make sure that it is properly installed and that the electrodes are clean.
Check the carburetor to make sure that it is clean and that the fuel lines are clear.
Check the engine to make sure that it is not seized.

If the chainsaw starts but won’t stay running:

If the chainsaw runs but doesn’t produce enough power:

If the chainsaw makes a strange noise:

If the chainsaw is leaking oil:

Check the oil level to make sure that it is correct.
Check the oil filter to make sure that it is properly installed.
Check the oil pump to make sure that it is working properly.
Check the engine to make sure that there are no leaks.

Solutions

Once you have identified the problem with your Earthwise 16 corded chainsaw, you can begin to fix it. The following are some solutions to common chainsaw problems:

Dirty or clogged air filter: Clean the air filter by removing it from the chainsaw and wiping it clean with a dry cloth.
Faulty spark plug: Replace the spark plug with a new one.
Problem with the carburetor: Clean the carburetor by removing it from the chainsaw and following the manufacturer’s instructions for cleaning.
Problem with the fuel line: Replace the fuel line with a new one.
Problem with the engine: Have the engine repaired or replaced by a qualified technician.

Prevention

You can help prevent problems with your Earthwise 16 corded chainsaw by following these tips:

Keep the air filter clean and free of debris.
Replace the spark plug regularly.
Clean the carburetor regularly.
Replace the fuel line regularly.
Have the engine serviced regularly.

By following these tips, you can help keep your Earthwise 16 corded chainsaw running smoothly and efficiently for many years to come.

FAQs: Earthwise 16 Corded Chainsaw Not Working

Why is my Earthwise 16 corded chainsaw not working?

There are a few possible reasons why your Earthwise 16 corded chainsaw might not be working. Here are some of the most common causes and solutions:

The chainsaw is not getting enough power. Make sure that the chainsaw is plugged into an outlet that is working properly. If the outlet is not working, try plugging the chainsaw into a different outlet.
The chainsaw is not getting enough fuel. Make sure that the chainsaw has enough gas in the tank. If the tank is empty, fill it up with fresh gas.
The chainsaw is not getting enough air. The chainsaw’s air filter may be clogged. Clean the air filter according to the manufacturer’s instructions.
The chainsaw’s chain is too tight. The chain may be too tight and is not moving freely. Loosen the chain according to the manufacturer’s instructions.
The chainsaw’s chain is too loose. The chain may be too loose and is coming off the sprocket. Tighten the chain according to the manufacturer’s instructions.

What should I do if my Earthwise 16 corded chainsaw is still not working?

If you have tried all of the above solutions and your chainsaw is still not working, you may need to take it to a qualified technician for repair.

How do I maintain my Earthwise 16 corded chainsaw?

To keep your Earthwise 16 corded chainsaw in good working order, it is important to maintain it regularly. Here are some tips for maintaining your chainsaw:

Inspect the chainsaw before each use. Check for any damage to the chainsaw’s body, chain, or bar. If you see any damage, do not use the chainsaw until it has been repaired.
Sharpen the chain regularly. A dull chain will not cut through wood efficiently and can damage the chainsaw. Sharpen the chain according to the manufacturer’s instructions.
Clean the chainsaw after each use. Clean the chainsaw’s body, chain, and bar to remove any dirt, dust, or debris. This will help to prevent the chainsaw from rusting or becoming damaged.
Store the chainsaw in a safe place. When you are not using the chainsaw, store it in a safe place where it will not be damaged.

What are the safety precautions I should take when using my Earthwise 16 corded chainsaw?

When using your Earthwise 16 corded chainsaw, it is important to take the following safety precautions:

Wear safety glasses. Safety glasses will protect your eyes from flying debris.
Wear hearing protection. Hearing protection will protect your hearing from the noise of the chainsaw.
Wear gloves. Gloves will protect your hands from the sharp chain.
Stand with your feet shoulder-width apart. This will help you to maintain your balance.
Never cut towards yourself. Always cut away from your body.
Be aware of your surroundings. Make sure that there are no people or objects in the path of the chainsaw.

Where can I find replacement parts for my Earthwise 16 corded chainsaw?

You can find replacement parts for your Earthwise 16 corded chainsaw at the following locations:

The Earthwise website. The Earthwise website has a list of authorized retailers where you can purchase replacement parts.
A local hardware store. Many hardware stores carry a variety of replacement parts for chainsaws.
An online retailer. You can also find replacement parts for chainsaws online.

Next Post You May Like: Earthwise Chainsaw Oiler Not Working

Earthwise 16 Corded Chainsaw Not Working? Discover the Fix!