Have you seen the memes about Earthwise pole saw batteries not working If so, you’re not alone. This is a common problem that can be frustrating for homeowners who need to use their pole saws. But don’t worry, there is a solution! In this blog post, I will explain why Earthwise pole saw batteries don’t work and how to fix the problem.
So Earthwise Pole Saw Battery Won’T Memes
1. Check the battery charger:
Make sure the charger is plugged in and turned on. Try a different outlet if the charger doesn’t seem to be working.
2. Clean the battery terminals:
Use a cotton swab and rubbing alcohol to clean the positive and negative terminals on the battery.3. Inspect the battery cable:
Make sure the cable is not damaged or frayed. Replace the cable if necessary.
4. Try a different battery:
If you have another Earthwise pole saw battery, try using it in your saw. This will help you determine if the problem is with the battery or the saw.
5. Contact customer service:
If you have tried all of the above solutions and your Earthwise pole saw battery still won’t charge, contact customer service for help.
Earthwise Pole Saw Battery Won’t Charge
What to Do If Your Earthwise Pole Saw Battery Won’t Charge
If your Earthwise pole saw battery won’t charge, there are a few things you can check to troubleshoot the problem.
Check the battery charger:
Make sure that the charger is plugged in and turned on. If the charger is not working, try a different charger.
Check the battery terminals:
Make sure that the battery terminals are clean and free of corrosion. If the terminals are corroded, clean them with a wire brush.
Check the battery voltage:
Use a voltmeter to check the battery voltage. If the battery voltage is low, it may need to be replaced.
Check the battery charge indicator:
If the battery charge indicator is not working, it may be a sign that the battery is faulty.
Try resetting the battery:
Some Earthwise pole saws have a reset button that can be used to reset the battery. Try pressing the reset button and see if the battery starts charging.
If you have tried all of these steps and your Earthwise pole saw battery still won’t charge, you may need to contact customer service for assistance.
How to Prevent Your Earthwise Pole Saw Battery from Dying
There are a few things you can do to prevent your Earthwise pole saw battery from dying:
Don’t let the battery run down completely:
When the battery is low, it will start to lose its ability to hold a charge. Try to keep the battery between 20% and 80% charged.
Don’t store the battery in a hot or cold environment:
Extreme temperatures can damage the battery. Store the battery in a cool, dry place.
Don’t drop the battery:
Dropping the battery can damage the cells and shorten its lifespan.
Don’t overcharge the battery:
Overcharging the battery can damage the cells and shorten its lifespan.
By following these tips, you can help to extend the life of your Earthwise pole saw battery.
Troubleshooting Tips for Earthwise Pole Saw Batteries
Here are a few troubleshooting tips for Earthwise pole saw batteries:
If the battery won’t charge, check the battery charger first:
Make sure that the charger is plugged in and turned on. If the charger is not working, try a different charger.
If the battery terminals are corroded, clean them with a wire brush:
Corrosion can prevent the battery from charging properly.
If the battery voltage is low, it may need to be replaced:
A low battery voltage can cause the pole saw to not start or run properly.
If the battery charge indicator is not working, it may be a sign that the battery is faulty:
A faulty battery will not hold a charge and will need to be replaced.
If you have tried all of these steps and the battery still won’t charge, you may need to contact customer service for assistance:
Customer service can help you troubleshoot the problem and determine if the battery needs to be replaced.
Also Read: Greenworks Battery Chain Saw Quit Working
FAQs: Earthwise Pole Saw Battery Won’t Work
Why won’t my Earthwise pole saw battery work?
There are a few reasons why your Earthwise pole saw battery might not be working. Here are some of the most common causes:
The battery is not charged: Make sure that the battery is fully charged before using it. You can check the battery level by looking at the indicator light on the saw.
The battery is old or damaged: If the battery is more than a few years old, it may be starting to lose its capacity. You can try replacing the battery with a new one.
The battery terminals are dirty or corroded: If the battery terminals are dirty or corroded, they can prevent the battery from making a good connection to the saw. Clean the terminals with a wire brush and apply a small amount of dielectric grease to help prevent future corrosion.
The battery is not inserted correctly: Make sure that the battery is inserted into the saw correctly. The battery should be inserted with the positive terminal facing up.
The saw is not turned on: Make sure that the saw is turned on before trying to use it.
How do I charge my Earthwise pole saw battery?
To charge your Earthwise pole saw battery, you will need the following items:
The Earthwise pole saw battery
The Earthwise pole saw battery charger
A power outlet
1. Connect the charger to the power outlet.
2. Connect the battery to the charger.
3. The charger will light up to indicate that it is charging the battery.
4. The battery will be fully charged when the charger light turns off.
How long does it take to charge my Earthwise pole saw battery?
It takes about 4-6 hours to fully charge an Earthwise pole saw battery.
How do I know when my Earthwise pole saw battery is fully charged?
The charger light will turn off when the battery is fully charged.
What can I do if my Earthwise pole saw battery still won’t work?
If your Earthwise pole saw battery still won’t work after trying the troubleshooting steps above, you may need to contact the manufacturer for assistance.
