Do you own an Earthwise pressure washer that’s not working If so, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself.
In this troubleshooting guide, I’ll walk you through the steps to diagnose and fix a broken Earthwise pressure washer. I’ll cover everything from common problems to simple fixes. So if you’re ready to get your pressure washer up and running again, let’s get started!
Why Earthwise Pressure Washer Not Working
No Water Flow
No water supply to the pressure washer:
Check the water supply hose to make sure it is connected to the pressure washer and to the water source. Make sure the water valve is turned on.
Clogged water filter:
Remove the water filter and clean it with a brush. If the filter is damaged, replace it.
Damaged water pump:
If the water pump is damaged, it will need to be replaced.
Low Water Pressure
Dirty or clogged water filter:
See the previous section for instructions on how to clean or replace the water filter.
Clogged spray nozzle:
Remove the spray nozzle and clean it with a brush. If the nozzle is damaged, replace it.
Damaged water pump:
See the previous section for instructions on how to check the water pump.
Restricted water flow:
Check the water supply hose to make sure it is not kinked or damaged.
Pressure Washer Won’t Start
Low battery:
Check the battery and make sure it is charged.
Disconnected battery:
Make sure the battery is connected to the pressure washer.
Damaged starter motor:
If the starter motor is damaged, it will need to be replaced.
Faulty control board:
If the control board is faulty, it will need to be replaced.
Pressure Washer Leaking
Loose or damaged hose connections:
Tighten all hose connections. If the hoses are damaged, replace them.
Damaged pump seals:
If the pump seals are damaged, they will need to be replaced.
Cracked or damaged pressure washer body:
If the pressure washer body is cracked or damaged, it will need to be repaired or replaced.
How to Troubleshoot: Earthwise Pressure Washer Not Working
Symptoms of a Pressure Washer Not Working
There are a few different symptoms that can indicate that your Earthwise pressure washer is not working properly. These include:
The pressure washer won’t start
The pressure washer starts but doesn’t produce any pressure
The pressure washer produces low pressure
The pressure washer leaks
The pressure washer makes strange noises
Troubleshooting a Pressure Washer Not Working
If your Earthwise pressure washer is not working properly, you can troubleshoot the problem by following these steps:
1. Check the power supply:
Make sure that the pressure washer is plugged into an outlet that is working properly.
2. Check the oil level:
The pressure washer should have oil in the reservoir. If the oil level is low, add oil to the reservoir until it reaches the full mark.3. Check the water supply:
Make sure that the pressure washer is connected to a water source that is providing enough water pressure.
4. Check the air filter:
The air filter should be clean and free of debris. If the air filter is dirty, clean it or replace it.
5. Check the spark plug:
The spark plug should be clean and free of corrosion. If the spark plug is dirty, clean it or replace it.
6. Check the fuel filter:
The fuel filter should be clean and free of debris. If the fuel filter is dirty, clean it or replace it.
7. Check the fuel line:
The fuel line should be free of kinks or obstructions. If the fuel line is damaged, replace it.
8. Check the pressure washer pump:
The pressure washer pump may be damaged if it is making strange noises or if it is not producing any pressure. If you suspect that the pressure washer pump is damaged, you should have it serviced by a qualified technician.
Preventing Pressure Washer Problems
You can help prevent problems with your Earthwise pressure washer by following these tips:
Use the pressure washer according to the manufacturer’s instructions:
Maintain the pressure washer regularly:
This includes changing the oil, cleaning the air filter, and replacing the spark plug and fuel filter as needed.
Store the pressure washer in a cool, dry place:
Do not use the pressure washer in wet or icy conditions:
By following these tips, you can help keep your Earthwise pressure washer in good working order and prevent problems from occurring.
Also Read: Electric Pressure Washer Ends Not Working
FAQs: Earthwise Pressure Washer Not Working
Why is my Earthwise pressure washer not working?
There are a few possible reasons why your Earthwise pressure washer may not be working. Here are some of the most common causes and solutions:
The pressure washer is not plugged in properly: Make sure that the pressure washer is plugged into an outlet that is providing power.
The pressure washer is not turned on: Check the power switch to make sure that it is in the On position.
The pressure washer is out of water: Make sure that the water tank is filled with water.
The pressure washer is clogged: The pressure washer may be clogged with dirt or debris. Try cleaning the filter and nozzle.
The pressure washer is damaged: If the pressure washer is not working after you have checked all of the above, it may be damaged. Contact Earthwise customer service for assistance.
What should I do if my Earthwise pressure washer is leaking?
If your Earthwise pressure washer is leaking, there are a few things you can do to troubleshoot the problem. Here are some of the most common causes and solutions:
The pressure washer is not properly assembled: Make sure that the pressure washer is assembled correctly.
The pressure washer is not properly maintained: The pressure washer should be regularly maintained to prevent leaks.
The pressure washer is damaged: If the pressure washer is leaking after you have checked all of the above, it may be damaged. Contact Earthwise customer service for assistance.
What should I do if my Earthwise pressure washer is making a loud noise?
If your Earthwise pressure washer is making a loud noise, there are a few things you can do to troubleshoot the problem. Here are some of the most common causes and solutions:
The pressure washer is not properly assembled: Make sure that the pressure washer is assembled correctly.
The pressure washer is not properly maintained: The pressure washer should be regularly maintained to prevent loud noises.
The pressure washer is damaged: If the pressure washer is making a loud noise after you have checked all of the above, it may be damaged. Contact Earthwise customer service for assistance.
What should I do if my Earthwise pressure washer is not spraying water?
If your Earthwise pressure washer is not spraying water, there are a few things you can do to troubleshoot the problem. Here are some of the most common causes and solutions:
The pressure washer is not plugged in properly: Make sure that the pressure washer is plugged into an outlet that is providing power.
The pressure washer is not turned on: Check the power switch to make sure that it is in the On position.
The pressure washer is out of water: Make sure that the water tank is filled with water.
The pressure washer is clogged: The pressure washer may be clogged with dirt or debris. Try cleaning the filter and nozzle.
The pressure washer is damaged: If the pressure washer is not working after you have checked all of the above, it may be damaged. Contact Earthwise customer service for assistance.
What should I do if my Earthwise pressure washer is overheating?
If your Earthwise pressure washer is overheating, there are a few things you can do to troubleshoot the problem. Here are some of the most common causes and solutions:
The pressure washer is not properly ventilated: Make sure that the pressure washer is in a well-ventilated area.
The pressure washer is not properly maintained: The pressure washer should be regularly maintained to prevent overheating.
The pressure washer is damaged: If the pressure washer is overheating after you have checked all of the above, it may be damaged. Contact Earthwise customer service for assistance.
