Answer: Firstly, cleaning the air filter can make a significant difference. Over time, the air filter can become clogged or dirty, impeding proper airflow and affecting the saw’s performance. Check that all safety features, such as the chain brake and trigger lock, are functioning correctly.
Next, checking the battery is vital. The battery serves as the power source for your EGO pole saw, and a low or faulty battery can be a common cause of starting issues. Examining the chain and bar is essential. Inspect these components for any signs of damage, such as a loose or dull chain or a bent bar.
Troubleshooting Your EGO Pole Saw (Step-by-Step)
Check the Battery
The most common reason for an EGO pole saw not starting is a depleted or improperly installed battery. To ensure your pole saw starts smoothly, follow these steps:
a. Make sure the battery is fully charged. If it’s not, charge it using the EGO charger until the indicator light turns green.
b. Ensure the battery is properly inserted into the pole saw. Align the battery with the slot and slide it in until it clicks into place.
c. Inspect the battery for any visible damage or wear. If you notice any issues, consider replacing the battery.
Examine the Chain and Bar
A jammed or improperly installed chain and bar can prevent your EGO pole saw from starting. To check for issues, follow these steps:
a. Turn off the pole saw and remove the battery.
b. Inspect the chain for any debris, such as wood chips or dirt, and clean it if necessary.
c. Ensure the chain is properly tensioned and aligned on the bar. If it’s too tight or too loose, adjust the tension using the tensioning screw.
d. Check the bar for any damage or wear. If you notice any issues, consider replacing the bar.
Inspect the Safety Features
EGO pole saws are equipped with safety features to protect users from accidents. If these features are not functioning correctly, the pole saw may not start. To troubleshoot, follow these steps:
a. Check the chain brake. Ensure it’s disengaged by pulling the chain brake handle toward the front handle.
b. Examine the trigger lock-out. Make sure it’s functioning correctly by pressing it down before squeezing the trigger.
Clean the Air Filter
A dirty air filter can restrict airflow to the engine, causing the pole saw not to start. To clean the air filter, follow these steps:
a. Turn off the pole saw and remove the battery.
b. Locate the air filter cover and remove it.
c. Clean the air filter using a soft brush or compressed air. If the filter is excessively dirty, consider replacing it.
d. Reinstall the air filter cover.
Contact EGO Customer Support
If you’ve tried all the troubleshooting steps above and your EGO pole saw still won’t start, it’s time to contact EGO customer support. They can provide further assistance and help you determine if your pole saw requires professional servicing or repair.
Conclusion
An EGO pole saw that won’t start can be frustrating, but with the right troubleshooting steps, you can quickly identify and resolve the issue. By checking the battery, chain and bar, safety features, and air filter, you can ensure your pole saw is in optimal working condition. If you’re still experiencing issues, don’t hesitate to reach out to EGO customer support for further assistance.
