Don’t panic! This is a common problem that can be easily fixed. Here are a few things to check
Is the chainsaw plugged in Make sure the power cord is securely plugged into an outlet.
Is the switch turned on Check the switch to make sure it is in the on position.
Is the chain oil reservoir full An electric chainsaw needs oil to lubricate the chain. If the chain oil reservoir is empty, the chainsaw will not start.
Is the air filter clean A dirty air filter can restrict airflow to the engine, causing it to stall. Clean the air filter according to the manufacturer’s instructions.
Is the spark plug properly gapped A spark plug that is not properly gapped can cause the engine to misfire. Check the spark plug gap and adjust it as needed.
So Electric Chainsaw Won’T Start
Your Electric Chainsaw Won’t Start? Here’s How to Fix It
1. Check the power cord to make sure it’s plugged in and turned on.
2. Check the switch to make sure it’s in the on position.
3. Check the battery to make sure it’s charged.
4. Clean the air filter.
5. Inspect the spark plug for damage.
6. Replace the spark plug if necessary.
7. If the chainsaw still won’t start, take it to a qualified repair shop.
Electric Chainsaw Won’t Start
Troubleshooting
If your electric chainsaw won’t start, there are a few things you can check to troubleshoot the problem.
Check the power cord:
Make sure that the power cord is plugged in securely to both the chainsaw and the outlet. If the power cord is damaged, it will need to be replaced.
Check the battery:
If your chainsaw is battery-powered, make sure that the battery is charged. If the battery is not charged, it will need to be charged before you can use the chainsaw.
Check the spark plug:
The spark plug is responsible for igniting the fuel in the chainsaw’s engine. If the spark plug is dirty or damaged, it will not be able to ignite the fuel and the chainsaw will not start. To check the spark plug, remove it from the chainsaw and inspect it for damage. If the spark plug is dirty, clean it with a wire brush. If the spark plug is damaged, it will need to be replaced.
Check the air filter:
The air filter prevents dirt and debris from entering the chainsaw’s engine. If the air filter is dirty, it will restrict airflow to the engine and the chainsaw will not start. To check the air filter, remove it from the chainsaw and inspect it for dirt and debris. If the air filter is dirty, clean it with a dry cloth. If the air filter is damaged, it will need to be replaced.
Check the fuel filter:
The fuel filter removes impurities from the fuel before it enters the chainsaw’s engine. If the fuel filter is clogged, it will restrict the flow of fuel to the engine and the chainsaw will not start. To check the fuel filter, remove it from the chainsaw and inspect it for clogs. If the fuel filter is clogged, it will need to be replaced.
Check the carburetor:
The carburetor is responsible for mixing the fuel and air in the correct proportions for the chainsaw’s engine. If the carburetor is not adjusted properly, the chainsaw will not start. To check the carburetor, you will need to adjust the carburetor’s idle speed, the fuel mixture, and the choke.
How to Start a Chainsaw
Once you have troubleshooted the problem and fixed any issues, you can start your chainsaw.
1. Make sure that the chainsaw is turned off and the chain brake is engaged.
2. Place the chainsaw on a flat surface.
3. Put on your safety glasses.
4. Pull the choke lever to the choke position.
5. Press the primer bulb several times.
6. Move the throttle lever to the fast position.
7. Grasp the chainsaw with both hands and pull the starter rope until the engine starts.
8. Release the choke lever and let the engine warm up for a few seconds.
9. Engage the chain brake and lower the chainsaw to the ground.
Tips for Starting a Chainsaw
Make sure that the chainsaw is properly maintained. A well-maintained chainsaw will start easier and run more efficiently.
Keep the chainsaw clean and free of debris. A dirty chainsaw will not start as easily.
Store the chainsaw in a cool, dry place. A hot or humid environment can make it difficult to start a chainsaw.
Use the correct type of fuel for your chainsaw. Using the wrong type of fuel can damage the chainsaw and make it difficult to start.
Follow the manufacturer’s instructions for starting your chainsaw. Each chainsaw is different, so it is important to follow the manufacturer’s instructions for starting your specific chainsaw.
Troubleshooting Tips
If your chainsaw still won’t start after troubleshooting the problem, here are a few additional tips:
Check the spark plug gap. The spark plug gap should be between 0.020 and 0.030 inches. If the spark plug gap is too large or too small, the chainsaw will not start.
Check the valve clearance. The valve clearance should be between 0.004 and 0.006 inches. If the valve clearance is too large or too small, the chainsaw will not start.
Check the compression. The compression should be between 100 and 120 psi. If the compression is too low, the chainsaw will not start.
If you are unable to troubleshoot the problem, take the chainsaw to a qualified service technician.
Also Read THis: Homelite Electric Chainsaw Chain Keeps Coming Off
FAQs: Electric Chainsaw Won’t Start
Why won’t my electric chainsaw start?
There are a few possible reasons why your electric chainsaw won’t start. Here are some of the most common causes:
The battery is dead: If the battery is dead, your chainsaw won’t have enough power to start. Check the battery and make sure it is fully charged.
The spark plug is dirty or damaged: A dirty or damaged spark plug can prevent your chainsaw from starting. Clean the spark plug with a wire brush and replace it if it is damaged.
The carburetor is dirty: A dirty carburetor can also prevent your chainsaw from starting. Clean the carburetor according to the manufacturer’s instructions.
The air filter is dirty: A dirty air filter can restrict airflow to the engine, which can prevent it from starting. Clean the air filter according to the manufacturer’s instructions.
The fuel line is clogged: A clogged fuel line can prevent fuel from reaching the engine, which can prevent it from starting. Check the fuel line for any blockages and clear them if necessary.
What should I do if my electric chainsaw won’t start?
If your electric chainsaw won’t start, here are a few things you can try:
1. Check the battery to make sure it is fully charged.
2. Clean the spark plug with a wire brush and replace it if it is damaged.
3. Clean the carburetor according to the manufacturer’s instructions.
4. Clean the air filter according to the manufacturer’s instructions.
5. Check the fuel line for any blockages and clear them if necessary.
If your chainsaw still won’t start, you may need to take it to a qualified service technician for further diagnosis and repair.
How can I prevent my electric chainsaw from not starting?
There are a few things you can do to prevent your electric chainsaw from not starting:
Keep the battery charged: Make sure to charge the battery regularly, especially if you don’t use your chainsaw often.
Clean the spark plug regularly: Clean the spark plug with a wire brush every few uses to prevent it from becoming dirty or damaged.
Clean the carburetor regularly: Clean the carburetor according to the manufacturer’s instructions to prevent it from becoming dirty.
Clean the air filter regularly: Clean the air filter according to the manufacturer’s instructions to prevent it from becoming dirty.
Check the fuel line regularly: Check the fuel line for any blockages and clear them if necessary.
By following these tips, you can help prevent your electric chainsaw from not starting.
What are the signs that my electric chainsaw needs maintenance?
There are a few signs that your electric chainsaw may need maintenance. Here are some of the most common:
The chainsaw is difficult to start.
The chainsaw is losing power.
The chainsaw is making strange noises.
The chainsaw is smoking.
The chainsaw is leaking oil.
If you notice any of these signs, it is important to take your chainsaw to a qualified service technician for inspection and repair.
What is the best way to store my electric chainsaw?
The best way to store your electric chainsaw is to:
Store it in a cool, dry place.
Keep the battery charged.
Clean the chainsaw thoroughly before storing it.
Cover the chainsaw with a protective cover.
By following these tips, you can help keep your electric chainsaw in good condition and prevent it from becoming damaged.
