If your Ferrex pressure washer isn’t working, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself with a little troubleshooting.
In this guide, I’ll walk you through the steps to troubleshoot a Ferrex pressure washer that’s not working. I’ll cover everything from simple checks like checking the power cord to more complex repairs like replacing a faulty pump.
By the end of this guide, you’ll have the knowledge and tools you need to get your Ferrex pressure washer up and running again.
Why Ferrex Pressure Washer Not Working
No Water Flow
No water coming out of the spray gun
Check the water supply to the pressure washer. Make sure that the water hose is connected to the pressure washer and to the water source, and that the water is turned on.
Check the pressure washer’s water filter. If the filter is clogged, clean it or replace it.
Check the pressure washer’s pump. If the pump is not working, it will need to be repaired or replaced.
Water leaking from the pressure washer
Check the O-rings on the pressure washer’s pump. If the O-rings are damaged or worn out, they will need to be replaced.
Check the pressure washer’s seals. If the seals are damaged or worn out, they will need to be replaced.
Check the pressure washer’s hoses. If the hoses are damaged or worn out, they will need to be replaced.
Low Pressure
The pressure washer is not generating enough pressure
Check the pressure washer’s oil level. If the oil level is low, add oil to the pressure washer.
Check the pressure washer’s air filter. If the air filter is dirty, clean it or replace it.
Check the pressure washer’s pump. If the pump is not working properly, it will need to be repaired or replaced.
Pressure Washer Won’t Start
The pressure washer won’t turn on
Check the power cord to the pressure washer. Make sure that the power cord is plugged into an outlet and that the outlet is working.
Check the pressure washer’s switch. Make sure that the switch is turned on.
Check the pressure washer’s circuit breaker. If the circuit breaker is tripped, reset it.
The pressure washer starts but won’t stay running
Check the pressure washer’s oil level. If the oil level is low, add oil to the pressure washer.
Check the pressure washer’s air filter. If the air filter is dirty, clean it or replace it.
Check the pressure washer’s spark plug. If the spark plug is dirty or damaged, it will need to be cleaned or replaced.
How to Troubleshoot And Fix: Ferrex Pressure Washer Not Working
Symptoms of a Faulty Ferrex Pressure Washer
There are a number of symptoms that can indicate that your Ferrex pressure washer is not working properly. These include:
The pressure washer won’t start
The pressure washer starts but doesn’t build up pressure
The pressure washer leaks water
The pressure washer makes strange noises
The pressure washer doesn’t clean effectively
Troubleshooting a Faulty Ferrex Pressure Washer
If your Ferrex pressure washer is not working properly, you can try to troubleshoot the problem yourself. Here are a few steps to follow:
1. Check the power supply:
Make sure that the pressure washer is plugged in and that the power switch is turned on.
2. Check the water supply:
Make sure that the water hose is connected to the pressure washer and that the water is turned on.3. Check the air filter:
The air filter is located on the side of the pressure washer. Remove the air filter and clean it with a brush.
4. Check the oil level:
The oil level is located on the bottom of the pressure washer. Check the oil level and add oil if necessary.
5. Check the spark plug:
The spark plug is located at the top of the engine. Remove the spark plug and check the condition of the spark plug. If the spark plug is damaged, replace it.
6. Check the fuel filter:
The fuel filter is located under the hood of the pressure washer. Remove the fuel filter and clean it with a brush.
7. Check the carburetor:
The carburetor is located on the side of the engine. Remove the carburetor and clean it with a carburetor cleaner.
Fixing a Faulty Ferrex Pressure Washer
If you have tried troubleshooting the problem yourself and you are still unable to fix the problem, you may need to take the pressure washer to a qualified repair technician.
Preventing Problems with Your Ferrex Pressure Washer
You can help prevent problems with your Ferrex pressure washer by following these tips:
Read the owner’s manual:
The owner’s manual contains important information about how to operate and maintain your pressure washer.
Inspect the pressure washer regularly:
Inspect the pressure washer for leaks, damage, and other problems.
Maintain the pressure washer properly:
Follow the manufacturer’s recommendations for maintenance and upkeep.
Store the pressure washer properly:
Store the pressure washer in a cool, dry place.
By following these tips, you can help keep your Ferrex pressure washer in good working order and prevent problems.
FAQs: Ferrex Pressure Washer Not Working
Why is my Ferrex pressure washer not working?
There are a few possible reasons why your Ferrex pressure washer may not be working. Here are some of the most common causes:
The pressure washer is not plugged in or turned on: Make sure that the pressure washer is plugged into an outlet and that the switch is turned on.
The pressure washer is out of water: Check the water tank to make sure that it is filled with water.
The pressure washer is clogged: The pressure washer may be clogged with dirt or debris. Try cleaning the filter and nozzle.
The pressure washer is overheating: The pressure washer may be overheating if it is used for too long or if it is not properly maintained. Allow the pressure washer to cool down before using it again.
The pressure washer has a faulty pump: If the pressure washer is not working even after you have checked the other possible causes, it may have a faulty pump. You will need to have the pump repaired or replaced.
How do I fix a Ferrex pressure washer that is not working?
To fix a Ferrex pressure washer that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem:
If the pressure washer is not plugged in or turned on, plug it in and turn it on:
If the pressure washer is out of water, fill the water tank:
If the pressure washer is clogged, clean the filter and nozzle:
If the pressure washer is overheating, allow it to cool down before using it again:
If the pressure washer has a faulty pump, have the pump repaired or replaced:
What are the common problems with Ferrex pressure washers?
The most common problems with Ferrex pressure washers include:
The pressure washer is not working: This can be caused by a variety of problems, such as the pressure washer being unplugged or turned off, the pressure washer being out of water, the pressure washer being clogged, the pressure washer overheating, or the pressure washer having a faulty pump.
The pressure washer is leaking water: This can be caused by a faulty hose, a faulty nozzle, or a faulty pump.
The pressure washer is making a loud noise: This can be caused by a faulty pump or a faulty motor.
The pressure washer is not generating enough pressure: This can be caused by a faulty pump or a faulty nozzle.
How can I prevent problems with my Ferrex pressure washer?
To prevent problems with your Ferrex pressure washer, you can follow these tips:
Read the owner’s manual and follow the instructions for use:
Inspect the pressure washer regularly for signs of wear and tear:
Replace worn or damaged parts as soon as possible:
Store the pressure washer in a cool, dry place when not in use:
Clean the pressure washer after each use:
What is the best way to clean a Ferrex pressure washer?
The best way to clean a Ferrex pressure washer is to follow these steps:
1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the water tank and drain the water.
3. Remove the nozzle and filter and clean them with warm, soapy water.
4. Wipe down the exterior of the pressure washer with a damp cloth.
5. Reassemble the pressure washer and reconnect it to the power source.
You should also clean the pressure washer after each use to prevent the build-up of dirt and debris.
Also Read: Generac Pressure Washer Soap Injector Not Working
