As a Pressure Washer Repair Technician, I have seen my fair share of Generac pressure washer soap dispenser problems.
I know how frustrating it can be when your soap dispenser isn’t working properly. You can’t clean your car, your driveway, or anything else without it. Not to mention the mess you’ll make if you try to use the pressure washer without the soap.
That’s why I’ve put together this troubleshooting guide. I’ll walk you through the steps to diagnose and resolve the problem so you can get your Generac pressure washer back up and running in no time.
Why Generac Pressure Washer Soap Dispenser Not Working
Reasons Why
The soap dispenser is clogged:
This is the most common reason for a soap dispenser not working. The soap can become thick and clog the dispenser, preventing it from dispensing soap. To fix this, you can try to clear the clog by using a thin object, such as a toothpick or a paper clip. If this does not work, you may need to replace the soap dispenser.
The soap dispenser is not getting enough water:
If the soap dispenser is not getting enough water, it will not be able to dispense soap properly. This can be caused by a problem with the water supply, such as a kinked hose or a blocked filter. To fix this, you will need to identify and fix the problem with the water supply.
The soap dispenser is not turned on:
This may seem like a simple mistake, but it is a common one. Make sure that the soap dispenser is turned on and that the switch is set to On.
The soap dispenser is not compatible with the pressure washer:
Some soap dispensers are only compatible with certain types of pressure washers. If you are using a soap dispenser that is not compatible with your pressure washer, it will not work properly. To fix this, you will need to purchase a soap dispenser that is compatible with your pressure washer.
The soap dispenser is broken:
If the soap dispenser is broken, it will not be able to dispense soap properly. This can be caused by a number of factors, such as a damaged hose or a broken pump. To fix this, you will need to replace the soap dispenser.
How to Troubleshoot And Fix: Generac Pressure Washer Soap Dispenser Not Working
Symptoms of a Generac Pressure Washer Soap Dispenser Not Working
There are a few different symptoms that you may experience if your Generac pressure washer soap dispenser is not working properly. These include:
The soap dispenser does not dispense any soap when you press the button.
The soap dispenser dispenses soap in a very slow or inconsistent manner.
The soap dispenser leaks soap.
The soap dispenser makes a loud noise when it is dispensing soap.
Troubleshooting a Generac Pressure Washer Soap Dispenser
If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself before calling a professional. Here are a few things to check:
Make sure that the soap dispenser is turned on:
The soap dispenser may be turned off if you have recently changed the soap cartridge. To turn the soap dispenser on, simply flip the switch on the side of the dispenser to the On position.
Make sure that the soap cartridge is properly inserted:
The soap cartridge may not be inserted correctly if you have recently changed it. To check the soap cartridge, remove it from the dispenser and reinsert it, making sure that it is properly seated.
Make sure that the soap cartridge is not clogged:
The soap cartridge may be clogged if you have been using a thick or sticky soap. To clean the soap cartridge, remove it from the dispenser and soak it in warm water for a few minutes. You can also use a small brush to clean the inside of the cartridge.
Make sure that the soap line is not kinked or blocked:
The soap line may be kinked or blocked if you have recently moved the pressure washer. To check the soap line, follow it from the dispenser to the gun. Make sure that there are no kinks or obstructions in the line.
Make sure that the soap pump is working properly:
The soap pump may not be working properly if it is damaged or worn out. To check the soap pump, remove the soap cartridge from the dispenser and turn on the pressure washer. If you hear a loud noise coming from the pump, the pump may be damaged. You will need to replace the pump in order to fix the problem.
Fixing a Generac Pressure Washer Soap Dispenser
If you have checked all of the above and the soap dispenser is still not working, you may need to fix it. Here are a few things you can try:
Replace the soap cartridge:
If the soap cartridge is damaged or clogged, you will need to replace it. You can find replacement soap cartridges at most hardware stores.
Replace the soap pump:
If the soap pump is damaged, you will need to replace it. You can find replacement soap pumps at most hardware stores.
Have the pressure washer serviced by a professional:
If you are not comfortable fixing the soap dispenser yourself, you can have the pressure washer serviced by a professional. A professional will be able to diagnose the problem and fix it quickly and efficiently.
Preventing Generac Pressure Washer Soap Dispenser Problems
You can help prevent Generac pressure washer soap dispenser problems by following these tips:
Use the correct type of soap:
Use a soap that is specifically designed for use with pressure washers. Avoid using dish soap or laundry detergent, as these soaps can clog the soap dispenser.
Clean the soap dispenser regularly:
Clean the soap dispenser regularly to prevent soap build-up and clogs. To clean the soap dispenser, remove the soap cartridge and soak it in warm water for a few minutes. You can also use a small brush to clean the inside of the dispenser.
Store the pressure washer properly:
Store the pressure washer in a cool, dry place. Do not store the pressure washer outdoors, as the extreme temperatures can damage the soap dispenser.
By following these tips, you can help prevent Generac pressure washer soap dispenser problems and keep your pressure washer running smoothly.
FAQs: Generac Pressure Washer Soap Dispenser Not Working
Why is my Generac pressure washer soap dispenser not working?
There are a few possible reasons why your Generac pressure washer soap dispenser may not be working.
The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, you can try cleaning the dispenser with a degreaser or by flushing it with water.
The soap dispenser is not getting enough water: If the soap dispenser is not getting enough water, it will not be able to dispense soap properly. To fix this, you can check the water supply to the dispenser and make sure that it is turned on and flowing properly.
The soap dispenser is not getting enough pressure: If the soap dispenser is not getting enough pressure, it will not be able to dispense soap properly. To fix this, you can check the pressure of the water supply to the dispenser and make sure that it is at least 40 psi.
The soap dispenser is not turned on: If the soap dispenser is not turned on, it will not be able to dispense soap. To fix this, you can check the switch on the dispenser and make sure that it is turned to the on position.
The soap dispenser is broken: If the soap dispenser is broken, it will not be able to dispense soap. In this case, you will need to replace the dispenser.
How do I clean the soap dispenser on my Generac pressure washer?
To clean the soap dispenser on your Generac pressure washer, you will need:
A degreaser
A bucket
A hose
A rag
1. Turn off the power to the pressure washer and disconnect the hose from the gun.
2. Fill the bucket with degreaser and water.
3. Dip the rag into the degreaser solution and wipe down the inside of the soap dispenser.
4. Rinse the soap dispenser with water.
5. Dry the soap dispenser with a rag.
6. Reattach the hose to the gun and turn on the power to the pressure washer.
How do I make sure that my Generac pressure washer soap dispenser is getting enough water?
To make sure that your Generac pressure washer soap dispenser is getting enough water, you will need to check the water supply to the dispenser.
1. Turn off the power to the pressure washer and disconnect the hose from the gun.
2. Locate the water supply valve to the soap dispenser.
3. Turn on the water supply valve.
4. Check the water pressure at the soap dispenser. The water pressure should be at least 40 psi.
5. If the water pressure is not at least 40 psi, you will need to adjust the water pressure regulator on the pressure washer.
6. Reattach the hose to the gun and turn on the power to the pressure washer.
How do I increase the pressure of my Generac pressure washer soap dispenser?
To increase the pressure of your Generac pressure washer soap dispenser, you will need to adjust the pressure regulator on the pressure washer.
1. Turn off the power to the pressure washer and disconnect the hose from the gun.
2. Locate the pressure regulator on the pressure washer.
3. Turn the pressure regulator clockwise to increase the pressure or counterclockwise to decrease the pressure.
4. Reattach the hose to the gun and turn on the power to the pressure washer.
How do I replace the soap dispenser on my Generac pressure washer?
To replace the soap dispenser on your Generac pressure washer, you will need:
A new soap dispenser
A Phillips head screwdriver
1. Turn off the power to the pressure washer and disconnect the hose from the gun.
2. Locate the soap dispenser on the pressure washer.
3. Remove the screws that hold the soap dispenser in place.
4. Remove the old soap dispenser.
5. Install the new soap dispenser.
6. Reattach the screws that hold the soap dispenser in place.
7. Turn on the power to the pressure washer and test the soap dispenser.
Next Post To Read: Greenworks 1600 Psi Pressure Washer Not Working
