Greenwoeks Chainsaw Bar Oil Not Working

As a chainsaw repair professional, I have seen firsthand the frustration and inconvenience that can be caused by a chainsaw bar oil not working. Not only can this make it difficult to use the chainsaw, but it can also be dangerous.

That’s why I’ve put together this troubleshooting guide to help you quickly diagnose and resolve the issue. By following these steps, you can get your chainsaw back up and running in no time.

Most Common Reasons Of Greenwoeks Chainsaw Bar Oil Not Working

Bar Oil Pump Not Working

The bar oil pump is responsible for sending oil to the chain. If the pump is not working, the chain will not be lubricated and will quickly wear out. There are a few things that can cause the bar oil pump to stop working, including:

A clogged oil filter. The oil filter prevents dirt and debris from entering the pump. If the filter becomes clogged, it will restrict the flow of oil and the pump will not be able to function properly.
A broken oil line. The oil line connects the pump to the bar. If the line is broken, oil will not be able to reach the chain.
A faulty oil pump. The oil pump itself can fail. This can be caused by wear and tear, or by a manufacturing defect.

Low Oil Level

If the oil level in the chainsaw is too low, the pump will not be able to draw enough oil to lubricate the chain. This can cause the chain to overheat and wear out quickly.

Clogged Oiler Holes

The oiler holes are located on the bar and direct oil to the chain. If these holes become clogged, oil will not be able to reach the chain and it will not be lubricated properly.

Incorrect Oil Viscosity

The oil viscosity is the thickness of the oil. The correct viscosity of oil for your chainsaw is listed in the owner’s manual. If you use oil that is too thin, it will not be able to lubricate the chain properly. If you use oil that is too thick, it will not be able to flow through the pump and oiler holes properly.

Chain Tension Too Tight

If the chain is too tight, it will not be able to move freely and the oil will not be able to reach the bar. This can cause the chain to overheat and wear out quickly.

Chain Tension Too Loose

If the chain is too loose, it will slap against the bar and fling oil off. This can cause the chain to overheat and wear out quickly.

How to Troubleshoot: Greenworks Chainsaw Bar Oil Not Working

Symptoms

There are a few symptoms that may indicate that your Greenworks chainsaw bar oil is not working properly. These include:

The chain is not lubricated properly, which can lead to overheating and damage.
The chain is difficult to pull, which can be caused by a build-up of sawdust and debris.
The chain is skipping or jumping, which can be caused by a lack of lubrication.

Causes

There are a number of possible causes for a Greenworks chainsaw bar oil not working properly. These include:

The oil reservoir is empty.
The oil pump is not working properly.
The oil line is clogged.
The bar oil nozzle is clogged.

Troubleshooting

To troubleshoot a Greenworks chainsaw bar oil problem, you will need to:

1. Check the oil reservoir to make sure that it is full.
2. Check the oil pump to make sure that it is working properly.
3. Check the oil line to make sure that it is not clogged.
4. Check the bar oil nozzle to make sure that it is not clogged.

Solutions

If the oil reservoir is empty, simply fill it up with the appropriate type of bar oil. If the oil pump is not working properly, you may need to replace it. If the oil line is clogged, you will need to clean it out. If the bar oil nozzle is clogged, you will need to clean it out or replace it.

Prevention

To prevent future problems with your Greenworks chainsaw bar oil, you can:

Keep the oil reservoir full.
Inspect the oil pump regularly for signs of wear and tear.
Clean the oil line regularly to prevent build-up of sawdust and debris.
Clean the bar oil nozzle regularly to prevent it from clogging.

By following these tips, you can help to ensure that your Greenworks chainsaw bar oil system is working properly and that your chainsaw is operating at peak performance.

FAQs: Greenworks Chainsaw Bar Oil Not Working

Why is my Greenworks chainsaw bar oil not working?

There are a few possible reasons why your Greenworks chainsaw bar oil may not be working.

The oil level is too low. Check the oil level in the reservoir and add more oil if necessary.
The oil filter is clogged. Clean or replace the oil filter if it is clogged.
The oil pump is not working properly. If the oil pump is not working properly, it will not be able to pump oil to the bar and chain. You may need to have the oil pump repaired or replaced.
The bar and chain are not properly lubricated. Make sure that you are using the correct type of bar oil and that you are applying it to the bar and chain regularly.

What can I do if my Greenworks chainsaw bar oil is not working?

If your Greenworks chainsaw bar oil is not working, you can try the following:

Check the oil level. Make sure that the oil level in the reservoir is at the correct level.
Clean or replace the oil filter. If the oil filter is clogged, it will not be able to allow oil to flow to the bar and chain.
Have the oil pump repaired or replaced. If the oil pump is not working properly, it will not be able to pump oil to the bar and chain.
Apply bar oil to the bar and chain. Make sure that you are using the correct type of bar oil and that you are applying it to the bar and chain regularly.

What type of bar oil should I use for my Greenworks chainsaw?

You should use a high-quality, synthetic bar oil for your Greenworks chainsaw. Synthetic bar oil is designed to resist evaporation and to provide long-lasting lubrication.

How often should I apply bar oil to my Greenworks chainsaw?

You should apply bar oil to your Greenworks chainsaw every time you use it. You should also apply bar oil to the bar and chain after each use.

What happens if I don’t use bar oil on my Greenworks chainsaw?

If you don’t use bar oil on your Greenworks chainsaw, the bar and chain will not be properly lubricated. This can lead to the bar and chain overheating, which can damage the chainsaw. It can also cause the bar and chain to wear out more quickly.

Next Post You May Like: Harbor Freight Chainsaw Grinder Not Working