Hedge Trimmer Keeps Cutting Out [Quick And Easy Solutions]

We may earn commission from qualifying purchases through affiliate links - at no extra cost to you.
Updated in April 2025 | By John

A Troubleshooting Guide

There’s nothing more frustrating than a hedge trimmer that keeps cutting out. Not only is it annoying, but it can also be dangerous. If you’re dealing with this issue, you’re not alone. In this guide, we’ll walk you through the steps to troubleshoot and fix a hedge trimmer that keeps cutting out. We’ll also provide some tips on how to prevent this issue from happening in the future.

So if your hedge trimmer is giving you trouble, read on for help!

Why Hedge Trimmer Keeps Cutting Out

Dirty Air Filter

The air filter is responsible for keeping dirt and debris out of the engine. If the air filter is dirty, it will restrict airflow to the engine, which can cause the engine to stall or cut out.

Clogged Fuel Filter

The fuel filter is responsible for filtering dirt and debris out of the fuel. If the fuel filter is clogged, it will restrict the flow of fuel to the engine, which can cause the engine to stall or cut out.

Spark Plug Problems

The spark plug is responsible for igniting the fuel in the engine. If the spark plug is faulty, it will not be able to properly ignite the fuel, which can cause the engine to stall or cut out.

Engine Overheating

If the engine overheats, it can cause the engine to stall or cut out. There are a number of reasons why an engine might overheat, including:

Low oil level
Faulty cooling fan
Clogged radiator
Defective thermostat

Wiring Problems

Wiring problems can cause the engine to stall or cut out. There are a number of reasons why a wiring problem might occur, including:

Loose or corroded wires
Damaged wires
Faulty connectors

Engine Mechanical Problems

Engine mechanical problems can also cause the engine to stall or cut out. There are a number of reasons why an engine mechanical problem might occur, including:

Worn out engine parts
Damaged engine parts
Faulty engine components

How to Troubleshoot: Hedge Trimmer Keeps Cutting Out

Symptoms

There are a few different symptoms that can indicate that your hedge trimmer is cutting out. These include:

The trimmer stops working altogether
The trimmer starts and then cuts out after a few seconds
The trimmer makes a loud noise and then cuts out
The trimmer’s motor runs, but the blades don’t move

Causes

There are a number of different things that can cause a hedge trimmer to cut out. These include:

A dirty air filter: A dirty air filter can restrict airflow to the engine, causing it to overheat and cut out.

A clogged fuel filter: A clogged fuel filter can prevent fuel from reaching the engine, causing it to stall.

A bad spark plug: A bad spark plug can prevent the engine from firing, causing it to cut out.

A loose or damaged spark plug wire: A loose or damaged spark plug wire can prevent the spark plug from firing, causing the engine to cut out.

A faulty ignition coil: A faulty ignition coil can prevent the spark plug from firing, causing the engine to cut out.

A bad fuel pump: A bad fuel pump can’t supply enough fuel to the engine, causing it to stall.

A bad carburetor: A bad carburetor can’t properly mix air and fuel, causing the engine to run rough and cut out.

A loose or damaged throttle cable: A loose or damaged throttle cable can prevent the engine from getting enough fuel, causing it to stall.

A bad starter motor: A bad starter motor can’t turn the engine over, causing it to not start.

Troubleshooting

To troubleshoot a hedge trimmer that keeps cutting out, you’ll need to first identify the cause of the problem. Here are a few steps to help you do that:

1. Inspect the air filter:
If the air filter is dirty, clean it or replace it.

2. Inspect the fuel filter:
If the fuel filter is clogged, replace it.3. Inspect the spark plug:
If the spark plug is fouled or damaged, replace it.

4. Inspect the spark plug wire:
If the spark plug wire is loose or damaged, replace it.

5. Inspect the ignition coil:
If the ignition coil is faulty, replace it.

6. Inspect the fuel pump:
If the fuel pump is bad, replace it.

7. Inspect the carburetor:
If the carburetor is bad, clean it or replace it.

8. Inspect the throttle cable:
If the throttle cable is loose or damaged, replace it.

9. Inspect the starter motor:
If the starter motor is bad, replace it.

Prevention

The best way to prevent your hedge trimmer from cutting out is to regularly maintain it. This includes:

Cleaning the air filter regularly
Changing the fuel filter regularly
Replacing the spark plug regularly
Inspecting the spark plug wire regularly
Inspecting the ignition coil regularly
Inspecting the fuel pump regularly
Inspecting the carburetor regularly
Inspecting the throttle cable regularly
Inspecting the starter motor regularly

By following these tips, you can help keep your hedge trimmer running smoothly and prevent it from cutting out.

Also Read THis: Hedge Trimmer Keeps Stopping

FAQs About Hedge Trimmers

Why does my hedge trimmer keep cutting out?

There are a few possible reasons why your hedge trimmer might keep cutting out. Here are some of the most common causes:

The blade is dull: A dull blade will not be able to cut through the branches as easily, and it will also require more power from the motor. This can lead to the motor overheating and cutting out.

The motor is overheating: If the motor is overheating, it will automatically shut down to prevent damage. This can be caused by a number of factors, such as using the trimmer for too long at a time, using it in hot weather, or not allowing it to cool down properly between uses.

The trimmer is not getting enough fuel: If the trimmer is not getting enough fuel, it will not be able to produce enough power to cut through the branches. This can be caused by a number of factors, such as using the wrong type of fuel, using a dirty fuel tank, or not filling the tank up all the way.

The trimmer is not getting enough air: If the trimmer is not getting enough air, it will not be able to cool down properly. This can lead to the motor overheating and cutting out. This can be caused by a number of factors, such as using the trimmer in dusty conditions, not cleaning the air filter regularly, or blocking the air intake vents.

How do I fix a hedge trimmer that keeps cutting out?

If your hedge trimmer is cutting out, there are a few things you can check to try to fix the problem. Here are some troubleshooting tips:

Check the blade: If the blade is dull, it will need to be sharpened or replaced.

Check the motor: If the motor is overheating, it will need to be allowed to cool down or repaired.

Check the fuel: Make sure you are using the correct type of fuel and that the fuel tank is filled up all the way.

Check the air filter: Clean the air filter regularly to prevent it from becoming clogged.

Check the air intake vents: Make sure the air intake vents are not blocked.

If you have tried all of these troubleshooting tips and your hedge trimmer is still cutting out, you may need to take it to a professional for repair.

How often should I sharpen my hedge trimmer blade?

The frequency with which you need to sharpen your hedge trimmer blade will depend on how often you use it and how hard you use it. Generally speaking, you should sharpen your blade every 20-30 hours of use. If you use your hedge trimmer more frequently, you may need to sharpen it more often.

What is the best type of fuel for a hedge trimmer?

The best type of fuel for a hedge trimmer is unleaded gasoline. You should avoid using ethanol-blended gasoline, as it can damage the engine.

How do I clean a hedge trimmer?

To clean your hedge trimmer, you will need:

A garden hose
A bucket of water
A mild detergent
A brush
A rag

1. Turn off the trimmer and disconnect the spark plug:
2. Remove the air filter:
3. Rinse the trimmer with the garden hose:
4. Mix the mild detergent with water in the bucket:
5. Dip the brush into the detergent solution and use it to clean the trimmer:
6. Rinse the trimmer with the garden hose:
7. Wipe the trimmer dry with the rag:
8. Reattach the air filter:

You should clean your hedge trimmer after each use to prevent dirt and debris from building up and causing damage.

About The Author

I am John, and I am the creator of this website. I have been in the woodworking industry for about 5 years. I developed my passion for DIY projects around the house when I was in high school. I have discovered a new appreciation for those who have the experience to pass along their expertise. They know what works best and are able to help others. I am proud to be among them.

Leave a Comment