Homelite Super 2 Chainsaw Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your oiler stop working. Not only can this lead to damage to your chainsaw, but it can also be a safety hazard. If your chainsaw isn’t properly lubricated, it can overheat and become dangerous to use.

In this guide, I’ll walk you through the steps to troubleshoot a Homelite Super 2 chainsaw oiler that isn’t working. I’ll cover everything from simple checks to more complex repairs, so you can get your chainsaw back up and running in no time.

By the end of this guide, you’ll have the knowledge and skills you need to diagnose and resolve any issue with your Homelite Super 2 chainsaw oiler. So let’s get started!

Most Common Reasons Of Homelite Super 2 Chainsaw Oiler Not Working

Most Common Reasons Of Homelite Super 2 Chainsaw Oiler Not Working

1. Blocked Oiler Tube

The most common reason for a Homelite Super 2 chainsaw oiler not working is a blocked oiler tube. This can be caused by sawdust, dirt, or other debris getting into the tube and preventing the oil from flowing to the chain. To fix this problem, you will need to clean the oiler tube.

2. Faulty Oiler Pump

Another common reason for a Homelite Super 2 chainsaw oiler not working is a faulty oiler pump. The oiler pump is responsible for pumping oil to the chain, and if it is not working properly, the chain will not be lubricated properly. To fix this problem, you will need to replace the oiler pump.

3. Low Oil Level

If the oil level in the chainsaw is too low, the oiler will not be able to pump enough oil to the chain. To fix this problem, you will need to add oil to the chainsaw until the oil level is correct.

4. Clogged Oil Filter

The oil filter in a Homelite Super 2 chainsaw helps to keep dirt and debris from getting into the oil system. If the oil filter is clogged, it can prevent the oil from flowing to the chain. To fix this problem, you will need to clean or replace the oil filter.

5. Misaligned Oiler Tube

The oiler tube on a Homelite Super 2 chainsaw should be aligned with the chain. If the oiler tube is misaligned, it can prevent the oil from flowing to the chain. To fix this problem, you will need to realign the oiler tube.

How to Troubleshoot: Homelite Super 2 Chainsaw Oiler Not Working

Symptoms

There are a few symptoms that may indicate that the oiler on your Homelite Super 2 chainsaw is not working properly. These include:

The chain is not being lubricated properly, resulting in excessive wear and tear.
The chain is smoking or sparking, which can be a fire hazard.
The engine is running hot, which can damage the engine.
The chainsaw is making a strange noise, which could be a sign of a problem with the oiler.

Troubleshooting

If you are experiencing any of the symptoms listed above, you should troubleshoot the oiler to determine the cause of the problem. Here are a few things you can check:

Check the oil level. The oiler will not work properly if the oil level is too low. Make sure that the oil reservoir is filled to the appropriate level.
Check the oil filter. The oil filter can become clogged, preventing the oil from reaching the chain. Remove the oil filter and clean it with a solvent. If the filter is damaged, replace it with a new one.
Check the oil line. The oil line can become kinked or damaged, preventing the oil from reaching the chain. Inspect the oil line for any damage and replace it if necessary.
Check the oil pump. The oil pump can fail, preventing the oil from being pumped to the chain. If you suspect that the oil pump is faulty, you will need to have it repaired or replaced.

Prevention

The best way to prevent problems with the oiler on your Homelite Super 2 chainsaw is to maintain it properly. Here are a few things you can do to prevent problems:

Keep the oil level topped up. Make sure that the oil reservoir is filled to the appropriate level at all times.
Change the oil filter regularly. The oil filter should be changed every 100 hours of operation.
Inspect the oil line regularly. Inspect the oil line for any damage and replace it if necessary.
Have the oil pump serviced regularly. The oil pump should be serviced every 200 hours of operation.

By following these tips, you can help to prevent problems with the oiler on your Homelite Super 2 chainsaw.

FAQs: Homelite Super 2 Chainsaw Oiler Not Working

Why isn’t my Homelite Super 2 chainsaw oiler working?

There are a few possible reasons why your Homelite Super 2 chainsaw oiler might not be working. Here are some of the most common causes:

The oiler is clogged. If the oiler is clogged, it won’t be able to pump oil to the chain. To clean the oiler, remove the oiler cover and use a small brush to clean out any debris.
The oiler is not getting enough oil. If the oiler is not getting enough oil, it won’t be able to pump oil to the chain. Make sure that the oil tank is full and that the oil line is not kinked or blocked.
The oiler is not working properly. If the oiler is not working properly, it may need to be replaced. To check if the oiler is working properly, start the chainsaw and listen for the oiler to pump. You should be able to hear a faint whirring noise. If you don’t hear the oiler, it may need to be replaced.

How do I fix a clogged Homelite Super 2 chainsaw oiler?

To fix a clogged Homelite Super 2 chainsaw oiler, follow these steps:

1. Remove the oiler cover.
2. Use a small brush to clean out any debris from the oiler.
3. Reinstall the oiler cover.

How do I make sure my Homelite Super 2 chainsaw oiler is getting enough oil?

To make sure your Homelite Super 2 chainsaw oiler is getting enough oil, follow these steps:

1. Make sure that the oil tank is full.
2. Check the oil line for kinks or blockages.
3. Start the chainsaw and listen for the oiler to pump. You should be able to hear a faint whirring noise.
4. If you don’t hear the oiler, it may need to be replaced.

How do I check if my Homelite Super 2 chainsaw oiler is working properly?

To check if your Homelite Super 2 chainsaw oiler is working properly, follow these steps:

1. Start the chainsaw and let it run for a few minutes.
2. Look at the oil level in the oil tank. The oil level should be slowly decreasing as the chainsaw runs.
3. If the oil level is not decreasing, the oiler may not be working properly.

How do I replace my Homelite Super 2 chainsaw oiler?

To replace your Homelite Super 2 chainsaw oiler, follow these steps:

1. Remove the oiler cover.
2. Remove the old oiler from the chainsaw.
3. Install the new oiler on the chainsaw.
4. Reinstall the oiler cover.

Next Post You May Like: Homelite Xl Chainsaw Oiler Not Working