Husqvarna Chainsaw 55 Chain Brake Not Working

As a chainsaw owner, there are few things more frustrating than having your chain brake fail. Not only is it a safety hazard, but it can also make it difficult to use your chainsaw effectively. If your Husqvarna chainsaw 55 chain brake is not working, there are a few things you can check to try to troubleshoot the problem. In this guide, we will walk you through the steps to diagnose and resolve this common issue. We will also provide tips on how to prevent future problems.

By following these steps, you can quickly and easily get your chainsaw back up and running so you can continue to use it safely and effectively.

Most Common Reasons Of Husqvarna Chainsaw 55 Chain Brake Not Working

Most Common Reasons Of Husqvarna Chainsaw 55 Chain Brake Not Working

1. Insufficient Chain Tension

If the chain is not properly tensioned, it can slip off the guide bar and cause the chain brake to not work properly. To check the chain tension, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Release the chain brake.
3. Use a chain-breaking tool to remove the chain from the guide bar.
4. Inspect the chain for wear and damage.
5. If the chain is worn or damaged, replace it with a new one.
6. Reinstall the chain on the guide bar and tighten the chain tensioner until the chain is snug against the guide bar.
7. Reengage the chain brake.

2. Debris in the Chain Brake

Debris can build up in the chain brake and prevent it from working properly. To clean the chain brake, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the chain brake cover.
3. Use a small brush or wire brush to clean the chain brake assembly.
4. Reinstall the chain brake cover.

3. Worn or Damaged Chain Brake Parts

If the chain brake parts are worn or damaged, they can cause the chain brake to not work properly. To check the chain brake parts for wear and damage, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the chain brake cover.
3. Inspect the chain brake assembly for wear and damage.
4. Replace any worn or damaged parts.

4. Incorrect Chain Brake Adjustment

The chain brake can be adjusted to different settings. If the chain brake is not properly adjusted, it can cause the chain brake to not work properly. To adjust the chain brake, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the chain brake cover.
3. Locate the chain brake adjustment screw.
4. Turn the adjustment screw clockwise to increase the chain brake tension or counterclockwise to decrease the chain brake tension.
5. Reinstall the chain brake cover.

How to Troubleshoot: Husqvarna Chainsaw 55 Chain Brake Not Working

Symptoms of a Chain Brake that is Not Working

There are a few symptoms that you can look for to determine if the chain brake on your Husqvarna chainsaw 55 is not working properly. These include:

The chain brake does not engage when you pull the lever.
The chain brake engages when you do not want it to.
The chain brake is difficult to engage or disengage.
The chain brake makes a clicking noise when you engage it.

Troubleshooting a Chain Brake that is Not Working

If you are experiencing any of the symptoms listed above, you will need to troubleshoot the chain brake to determine the cause of the problem. Here are a few things you can check:

Check the chain brake lever. Make sure that the lever is in the correct position and that it is not damaged. If the lever is damaged, you will need to replace it.
Check the chain brake spring. The chain brake spring is responsible for engaging the chain brake. If the spring is broken or damaged, it will not be able to properly engage the chain brake. You will need to replace the spring if it is damaged.
Check the chain brake housing. The chain brake housing is the part of the chainsaw that houses the chain brake mechanism. If the housing is damaged, it can cause the chain brake to not work properly. You will need to replace the housing if it is damaged.

How to Repair a Chain Brake that is Not Working

Once you have determined the cause of the problem, you can repair the chain brake. Here are the steps involved in repairing a chain brake:

1. Remove the chain brake lever. To remove the chain brake lever, you will need to first remove the chain guard. Once the chain guard is removed, you will be able to access the chain brake lever. Use a screwdriver to pry the lever off of the chainsaw.
2. Inspect the chain brake lever. Inspect the chain brake lever for damage. If the lever is damaged, you will need to replace it.
3. Replace the chain brake spring. If the chain brake spring is damaged, you will need to replace it. To replace the spring, you will need to first remove the old spring. Once the old spring is removed, you can install the new spring.
4. Inspect the chain brake housing. Inspect the chain brake housing for damage. If the housing is damaged, you will need to replace it. To replace the housing, you will need to first remove the old housing. Once the old housing is removed, you can install the new housing.
5. Reinstall the chain brake lever. Once you have repaired the chain brake, you can reinstall the chain brake lever. To reinstall the lever, you will need to first install the spring. Once the spring is installed, you can reinstall the lever.

Preventing Chain Brake Problems

You can help prevent chain brake problems by following these tips:

Keep the chain brake clean. Make sure to keep the chain brake clean and free of debris. This will help to prevent the chain brake from becoming stuck or damaged.
Inspect the chain brake regularly. Inspect the chain brake regularly for damage. This will help you to identify and repair any problems before they become serious.
Use the chain brake properly. Use the chain brake properly to avoid putting unnecessary strain on the mechanism. This means engaging the chain brake before you release the throttle and disengaging the chain brake before you start the chainsaw.

By following these tips, you can help to prevent chain brake problems and keep your Husqvarna chainsaw 55 running smoothly.

FAQs: Husqvarna Chainsaw 55 Chain Brake Not Working

Why is my Husqvarna chainsaw 55 chain brake not working?

There are a few possible reasons why your Husqvarna chainsaw 55 chain brake may not be working. Here are some of the most common causes:

The brake lever is not engaged. Make sure that the brake lever is in the engaged position. This is usually indicated by a red button or lever that is depressed.
The brake cable is damaged or broken. The brake cable is a metal cable that connects the brake lever to the brake mechanism. If the cable is damaged or broken, it will not be able to engage the brake.
The brake mechanism is dirty or damaged. The brake mechanism is a series of gears and springs that work together to engage the brake. If the mechanism is dirty or damaged, it may not be able to work properly.
The chainsaw is not properly lubricated. If the chainsaw is not properly lubricated, the chain may become stuck in the brake, preventing it from engaging.

How do I fix my Husqvarna chainsaw 55 chain brake?

To fix your Husqvarna chainsaw 55 chain brake, you will need to identify the cause of the problem and take the appropriate steps to fix it. Here are some steps to help you troubleshoot the problem:

1. Check the brake lever. Make sure that the brake lever is in the engaged position. If it is not, depress the lever until it clicks into place.
2. Inspect the brake cable. Look for any signs of damage or wear. If the cable is damaged or broken, it will need to be replaced.
3. Clean the brake mechanism. Use a small brush to remove any dirt or debris from the brake mechanism.
4. Lubricate the chainsaw. Apply a light coat of oil to the chain and chain guide bar.

If you are unable to fix the problem yourself, you may need to take your chainsaw to a qualified service technician.

What are the safety precautions I should take when using a chainsaw?

When using a chainsaw, it is important to take the following safety precautions:

Wear safety glasses and gloves. Safety glasses will protect your eyes from flying debris, and gloves will protect your hands from cuts and abrasions.
Use a chainsaw chap. A chainsaw chap is a piece of clothing that covers your legs and protects them from chainsaw kickback.
Keep the chain sharp. A sharp chain will cut more easily and reduce the risk of kickback.
Never cut above shoulder height. This is the safest position for your body and will reduce the risk of injury.
Be aware of your surroundings. Make sure that you have a clear work area and that there are no obstacles in your way.

What are the different types of chainsaws?

There are three main types of chainsaws:

Bare-knuckle chainsaws are the most basic type of chainsaw and are typically used for light-duty tasks such as cutting firewood.
Padded chainsaws have a rubberized coating on the handle that provides more comfort and control. They are typically used for medium-duty tasks such as trimming trees.
Full-coverage chainsaws have a full wraparound handle that provides the most comfort and control. They are typically used for heavy-duty tasks such as felling trees.

What is the best chainsaw for me?

The best chainsaw for you will depend on the type of tasks you will be using it for and your budget. If you are only going to be using the chainsaw for light-duty tasks, a bare-knuckle chainsaw will be sufficient. If you will be using the chainsaw for medium-duty tasks, a padded chainsaw will be a better option. If you will be using the chainsaw for heavy-duty tasks, a full-coverage chainsaw will be the best choice.

Here are some factors to consider when choosing a chainsaw:

Power: The power of a chainsaw is measured in horsepower (hp). The higher the horsepower, the more powerful the chainsaw will be.
Bar length: The bar length of a chainsaw is measured in inches. The longer the bar, the more wood the chainsaw can cut at once.
Chain speed: The chain speed of a chainsaw is measured in feet per minute (fpm). The faster the chain speed, the faster the chainsaw will cut.
Weight: The weight of a chainsaw is important to consider if you will be

Next Post You May Like: Husqvarna Chainsaw Bar Oiler Not Working