Husqvarna Chainsaw Oil Pump Not Working

As a chainsaw owner, there are few things more frustrating than having your saw not work properly. One of the most common problems that can occur is when the oil pump stops working. This can be a major inconvenience, as it can lead to damage to the saw and your workpiece. In this guide, we will discuss the common causes of a and how to troubleshoot and resolve the issue.

We will also provide tips on how to prevent this problem from happening in the future. By following these steps, you can quickly diagnose and resolve the issue and get your saw back up and running in no time.

Why Husqvarna Chainsaw Oil Pump Not Working

Reasons why Husqvarna chainsaw oil pump not working

Low oil level: The most common reason for a chainsaw oil pump not working is low oil level. Make sure the oil tank is filled to the proper level.
Clogged oil filter: A clogged oil filter can restrict the flow of oil to the chainsaw chain, causing the oil pump to work harder and eventually fail. Clean or replace the oil filter as needed.
Damaged oil pump: The oil pump can be damaged if it is run dry of oil or if it is subjected to excessive vibration. If the oil pump is damaged, it will need to be replaced.
Defective oil pump gasket: The oil pump gasket can leak, causing oil to leak out of the chainsaw and preventing the oil from reaching the chain. Replace the oil pump gasket as needed.
Incorrect oil viscosity: Using the wrong oil viscosity can cause the oil to thicken and become difficult to pump. Use the oil viscosity recommended by the chainsaw manufacturer.

How to Troubleshoot: Husqvarna Chainsaw Oil Pump Not Working

Symptoms of a Husqvarna Chainsaw Oil Pump Not Working

There are a few signs that your Husqvarna chainsaw oil pump may not be working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chain is smoking or sparking.
The chain is not being lubricated properly, which can lead to damage to the chain and bar.
The oil level in the chainsaw is low, even though you have recently filled it.

Troubleshooting a Husqvarna Chainsaw Oil Pump

If you suspect that your Husqvarna chainsaw oil pump is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. Make sure that the oil level in the chainsaw is correct. The oil level should be between the full and add marks on the oil tank. If the oil level is low, fill the tank with fresh oil.
2. Check the oil filter. The oil filter can become clogged with dirt and debris, which can prevent the oil from flowing to the chain. To check the oil filter, remove the oil filter cover and inspect the filter. If the filter is clogged, replace it with a new filter.
3. Check the oil pump. The oil pump can become damaged if it is not properly lubricated. To check the oil pump, remove the oil pump cover and inspect the pump. If the pump is damaged, replace it with a new pump.

Preventing Husqvarna Chainsaw Oil Pump Problems

You can help prevent Husqvarna chainsaw oil pump problems by following these tips:

Keep the oil level in the chainsaw full. A low oil level can cause the oil pump to work harder, which can lead to damage to the pump.
Change the oil filter regularly. A clogged oil filter can prevent the oil from flowing to the chain, which can lead to damage to the chain and bar.
Lubricate the oil pump regularly. The oil pump can become damaged if it is not properly lubricated.

By following these tips, you can help keep your Husqvarna chainsaw oil pump working properly and prevent damage to your chainsaw.

FAQs: Husqvarna Chainsaw Oil Pump Not Working

Why is my Husqvarna chainsaw oil pump not working?

There are a few possible reasons why your Husqvarna chainsaw oil pump may not be working. These include:

The oil pump is clogged. If the oil pump is clogged, it will not be able to pump oil to the chainsaw chain. This can be caused by dirt or debris getting into the pump, or by the oil becoming too thick.
The oil pump is damaged. If the oil pump is damaged, it will not be able to pump oil to the chainsaw chain. This can be caused by a broken or worn-out pump, or by a leak in the pump housing.
The oil pump is not getting enough power. If the oil pump is not getting enough power, it will not be able to pump oil to the chainsaw chain. This can be caused by a problem with the chainsaw’s electrical system, or by a problem with the fuel system.

How do I fix a Husqvarna chainsaw oil pump that is not working?

To fix a Husqvarna chainsaw oil pump that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can take the appropriate steps to fix it.

If the oil pump is clogged, you can clean it by removing the oil pump cover and using a small brush to remove any dirt or debris.
If the oil pump is damaged, you will need to replace it.
If the oil pump is not getting enough power, you will need to troubleshoot the chainsaw’s electrical system or fuel system to find and fix the problem.

What are the symptoms of a Husqvarna chainsaw oil pump that is not working?

The symptoms of a Husqvarna chainsaw oil pump that is not working can include:

The chainsaw chain is not being lubricated properly. This can cause the chain to overheat and wear out quickly.
The chainsaw is making a loud noise. This noise is caused by the chain rubbing against the bar without any lubrication.
The chainsaw is smoking. This is caused by the chain overheating.

How can I prevent a Husqvarna chainsaw oil pump from failing?

You can prevent a Husqvarna chainsaw oil pump from failing by following these tips:

Use the correct type of oil for your chainsaw. The oil pump is designed to work with a specific type of oil. Using the wrong type of oil can damage the pump.
Keep the oil level in the chainsaw reservoir topped up. A low oil level can cause the oil pump to overheat and fail.
Clean the oil pump regularly. A clogged oil pump can cause the chainsaw chain to overheat and wear out quickly.

What should I do if my Husqvarna chainsaw oil pump fails?

If your Husqvarna chainsaw oil pump fails, you should take it to a qualified service center for repairs. A qualified technician will be able to diagnose the problem and fix it properly.

Next Post to Read: Husqvarna Chainsaw Primer Bulb Not Working