Your Hyper Tough pressure washer is a powerful tool that can make cleaning your home or business a breeze. But when the soap dispenser stops working, it can be a major inconvenience. Not only does it make it more difficult to clean, but it can also waste soap.
If you’re experiencing this issue, you’re not alone. In fact, it’s one of the most common problems with Hyper Tough pressure washers. But don’t worry, it’s usually an easy fix. In this guide, I’ll walk you through the steps to troubleshoot and repair your soap dispenser.
So if you’re ready to get your pressure washer back in working order, let’s get started!
Why Hyper Tough Pressure Washer Soap Dispenser Not Working
Reasons Why Hyper Tough Pressure Washer Soap Dispenser Not Working
The soap dispenser is not getting enough water:
This can be caused by a clogged nozzle, a kinked hose, or a problem with the pump.
The soap dispenser is not getting enough soap:
This can be caused by a clogged soap reservoir, a problem with the soap pump, or a problem with the soap.
The soap dispenser is not working properly:
This can be caused by a faulty soap dispenser, a problem with the electrical wiring, or a problem with the pressure washer itself.
How to Fix a Hyper Tough Pressure Washer Soap Dispenser
Check the soap dispenser for clogs:
Remove the nozzle and clean it with a small brush. Check the hose for kinks or obstructions. Inspect the pump for any damage or debris.
Check the soap reservoir for clogs:
Remove the reservoir and clean it with a small brush. Make sure the soap reservoir is full.
Check the soap pump for problems:
Remove the soap pump and inspect it for damage or wear. Replace the soap pump if necessary.
Check the electrical wiring for problems:
Inspect the electrical wiring for damage or loose connections. Repair or replace the electrical wiring as needed.
Check the pressure washer itself for problems:
Inspect the pressure washer for damage or wear. Repair or replace the pressure washer as needed.
How to Troubleshoot: Hyper Tough Pressure Washer Soap Dispenser Not Working
Symptoms
There are a few different symptoms that can indicate that your Hyper Tough pressure washer soap dispenser is not working properly. These include:
The soap dispenser does not dispense any soap when you press the trigger.
The soap dispenser leaks soap when you are not using it.
The soap dispenser is not aligned with the spray wand.
The soap dispenser is clogged.
Troubleshooting
If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself. Here are a few things you can check:
Make sure that the soap dispenser is turned on:
The soap dispenser has a switch on the side that can be turned on or off. Make sure that the switch is turned to the On position.
Check the soap reservoir:
The soap reservoir is located on the back of the pressure washer. Make sure that the reservoir is filled with soap. If the reservoir is empty, fill it up with soap and try again.
Check the soap hose:
The soap hose connects the soap reservoir to the soap dispenser. Make sure that the hose is not kinked or damaged. If the hose is damaged, you will need to replace it.
Check the soap dispenser nozzle:
The soap dispenser nozzle is located at the end of the soap hose. Make sure that the nozzle is not clogged. If the nozzle is clogged, you can try cleaning it with a toothpick or a needle.
If you have tried troubleshooting the problem yourself and you are still having trouble, you can contact Hyper Tough customer service for help.
Also Read: Idle Down Pressure Washer Not Working
FAQs: Hyper Tough Pressure Washer Soap Dispenser Not Working
Why is my Hyper Tough pressure washer soap dispenser not working?
There are a few possible reasons why your Hyper Tough pressure washer soap dispenser may not be working. Here are some of the most common causes:
The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, you can try to clear the clog by:
Removing the soap dispenser from the pressure washer and cleaning it with a degreaser or soap and water.
Using a thin wire or pipe cleaner to clear the clog.
The soap dispenser is not getting enough water: If the soap dispenser is not getting enough water, it will not be able to dispense the soap properly. To fix this, you can try to:
Increase the water pressure.
Make sure that the water hose is not kinked or blocked.
The soap dispenser is not turned on: Make sure that the soap dispenser is turned on. The soap dispenser should have a switch or button that you can turn to turn it on.
The soap dispenser is not compatible with your pressure washer: Make sure that the soap dispenser is compatible with your pressure washer. The soap dispenser should be specifically designed for your pressure washer model.
How do I fix a clogged Hyper Tough pressure washer soap dispenser?
To fix a clogged Hyper Tough pressure washer soap dispenser, you can try to:
Remove the soap dispenser from the pressure washer and clean it with a degreaser or soap and water.
Use a thin wire or pipe cleaner to clear the clog.
If the clog is severe, you may need to replace the soap dispenser.
How do I increase the water pressure to my Hyper Tough pressure washer soap dispenser?
To increase the water pressure to your Hyper Tough pressure washer soap dispenser, you can try to:
Turn up the water pressure on your pressure washer.
Make sure that the water hose is not kinked or blocked.
If you are using a garden hose to connect to your pressure washer, try using a higher-quality hose that is less likely to kink.
How do I turn on the soap dispenser on my Hyper Tough pressure washer?
To turn on the soap dispenser on your Hyper Tough pressure washer, you can try to:
Look for a switch or button on the soap dispenser that you can turn to turn it on.
Check the owner’s manual for your pressure washer to see how to turn on the soap dispenser.
How do I know if my Hyper Tough pressure washer soap dispenser is compatible with my pressure washer?
To know if your Hyper Tough pressure washer soap dispenser is compatible with your pressure washer, you can check the following:
The soap dispenser should be specifically designed for your pressure washer model.
The soap dispenser should have the same water pressure rating as your pressure washer.
The soap dispenser should have the same type of connection as your pressure washer.
