Jonsered Chainsaw Oiler Not Working

As a chainsaw owner, there’s nothing more frustrating than when your oiler stops working. Not only can it lead to damage to your chainsaw, but it can also be a safety hazard. If your chainsaw isn’t properly lubricated, it can overheat and cause the chain to seize up. This can be dangerous, as it can cause you to lose control of the saw and potentially injure yourself.

That’s why it’s so important to quickly diagnose and resolve the issue of a . In this guide, I’ll walk you through the steps on how to do just that. I’ll cover everything from common causes of the problem to troubleshooting tips and tricks. By the end of this guide, you’ll be able to get your chainsaw oiler up and running again in no time.

Most Common Reasons Of Jonsered Chainsaw Oiler Not Working

Most Common Reasons Of Jonsered Chainsaw Oiler Not Working

1. Oiler Pump Not Working

The most common reason for a Jonsered chainsaw oiler not working is a faulty oiler pump. The oiler pump is responsible for sending oil to the chain, and if it is not working properly, the chain will not be lubricated properly and will eventually wear out. There are a few things that can cause the oiler pump to stop working, including:

A clogged oiler pump: The oiler pump can become clogged with debris, preventing it from pumping oil to the chain. This can be caused by dirt, sawdust, or other debris getting into the pump.
A broken oiler pump: The oiler pump can also break down, preventing it from pumping oil to the chain. This can be caused by wear and tear, or by a manufacturing defect.

If you suspect that the oiler pump is not working properly, you can try to clean it or replace it. If you are not comfortable doing this yourself, you can take your chainsaw to a qualified technician.

2. Oiler Hose Not Connected Properly

Another common reason for a Jonsered chainsaw oiler not working is a hose that is not connected properly. The oiler hose is responsible for carrying oil from the pump to the chain, and if it is not connected properly, the chain will not be lubricated properly. There are a few things that can cause the oiler hose to become disconnected, including:

A loose hose connection: The oiler hose can become loose, preventing it from properly connecting to the pump or the chain. This can be caused by wear and tear, or by a mistake when connecting the hose.
A damaged hose: The oiler hose can also become damaged, preventing it from properly connecting to the pump or the chain. This can be caused by wear and tear, or by a sharp object puncturing the hose.

If you suspect that the oiler hose is not connected properly, you can try to reconnect it. If you are not comfortable doing this yourself, you can take your chainsaw to a qualified technician.

3. Oiler Filter Clogged

The oiler filter is responsible for filtering out debris from the oil before it is sent to the chain. If the oiler filter becomes clogged, it can prevent oil from reaching the chain, which can lead to the chain wearing out prematurely. There are a few things that can cause the oiler filter to become clogged, including:

Dirt: Dirt and other debris can get into the oiler filter, preventing it from filtering the oil properly.
Sawdust: Sawdust can also get into the oiler filter, clogging it and preventing it from filtering the oil properly.

If you suspect that the oiler filter is clogged, you can try to clean it. If you are not comfortable doing this yourself, you can take your chainsaw to a qualified technician.

4. Oil Level Too Low

If the oil level in the chainsaw is too low, the oiler will not be able to pump enough oil to the chain. This can lead to the chain wearing out prematurely. There are a few things that can cause the oil level to become too low, including:

Leaking oil tank: The oil tank can leak, causing the oil level to become too low.
Overfilling the oil tank: Overfilling the oil tank can cause the oil to overflow and spill out, which can also lead to the oil level becoming too low.

If you suspect that the oil level is too low, you can check the oil level indicator on the chainsaw. If the oil level is low, you can add more oil to the tank.

5. Oil Type Incorrect

The oiler is designed to use a specific type of oil. If you use the wrong type of oil, it can cause the oiler to not work properly. There are a few things that can happen if you use the wrong type of oil, including:

The oil can become thick and sludgy: This can prevent the oil from flowing properly through the oiler system.
The oil can damage the oiler pump: The wrong type of oil can damage the oiler pump, causing it to stop working.

If you are not sure what type of oil to use, you can consult the owner’s manual for your chainsaw.

How to Troubleshoot: Jonsered Chainsaw Oiler Not Working

Symptoms of a Chainsaw Oiler Not Working

There are a few signs that your Jonsered chainsaw oiler may not be working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oiler is leaking oil, which can be a fire hazard.
The oiler is making a loud noise, which could indicate a problem with the pump or motor.

Troubleshooting a Chainsaw Oiler

If you suspect that your Jonsered chainsaw oiler is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. Make sure that the oil reservoir is full of oil. If the oil level is low, fill the reservoir with the correct type of oil.
2. Check the oil line. Make sure that the oil line is not kinked or blocked. If the oil line is blocked, you can try to clear it by blowing it out with compressed air.
3. Check the oil pump. The oil pump is responsible for pumping oil to the chain. If the oil pump is not working properly, you may need to replace it.
4. Check the oil filter. The oil filter removes dirt and debris from the oil. If the oil filter is clogged, it can prevent oil from reaching the chain. You can clean the oil filter by removing it from the chainsaw and soaking it in a solvent.

Preventing Chainsaw Oiler Problems

You can help prevent chainsaw oiler problems by following these tips:

Keep the oil reservoir full of oil.
Check the oil line regularly for kinks or blockages.
Clean the oil pump and oil filter regularly.
Use the correct type of oil for your chainsaw.

By following these tips, you can help keep your Jonsered chainsaw oiler running smoothly and prevent damage to your chainsaw.

FAQs: Jonsered Chainsaw Oiler Not Working

Why is my Jonsered chainsaw oiler not working?

There are a few possible reasons why your Jonsered chainsaw oiler might not be working. Here are some of the most common causes:

The oiler is not properly adjusted. The oiler needs to be adjusted so that it delivers the correct amount of oil to the chain. If the oiler is not adjusted correctly, it may not be able to keep the chain lubricated properly, which can lead to damage to the chain.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent it from delivering oil to the chain. If the oiler is clogged, you will need to clean it out in order to get it working properly again.
The oiler is broken. The oiler is a mechanical device, and like any mechanical device, it can break down. If the oiler is broken, you will need to replace it in order to get it working again.

How do I adjust the oiler on my Jonsered chainsaw?

To adjust the oiler on your Jonsered chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Locate the oiler adjustment screw. The oiler adjustment screw is usually located on the side of the chainsaw, near the chain.
3. Use a small screwdriver to turn the oiler adjustment screw clockwise to increase the amount of oil being delivered to the chain, or counterclockwise to decrease the amount of oil being delivered to the chain.
4. Re-start the chainsaw and test the oiler. The oiler should be delivering the correct amount of oil to the chain.

How do I clean the oiler on my Jonsered chainsaw?

To clean the oiler on your Jonsered chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover. The oiler cover is usually located on the side of the chainsaw, near the chain.
3. Remove the oiler filter. The oiler filter is usually a small, round filter located inside the oiler cover.
4. Clean the oiler filter with a clean rag or paper towel.
5. Re-install the oiler filter and oiler cover.

How do I replace the oiler on my Jonsered chainsaw?

To replace the oiler on your Jonsered chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover. The oiler cover is usually located on the side of the chainsaw, near the chain.
3. Remove the old oiler. The old oiler is usually a small, cylindrical device that is attached to the chainsaw’s engine.
4. Install the new oiler. The new oiler is usually a small, cylindrical device that is attached to the chainsaw’s engine.
5. Re-install the oiler cover.

What can I do if my Jonsered chainsaw oiler is still not working?

If your Jonsered chainsaw oiler is still not working after you have tried the steps above, you may need to take the chainsaw to a qualified service technician. The service technician will be able to diagnose the problem and make the necessary repairs.

Next Post You May Like: Mac 610 Chainsaw Chain Oiler Not Working