Mountfield Petrol Hedge Trimmer Won T Start [Causes & Proven Solutions]

We may earn commission from qualifying purchases through affiliate links - at no extra cost to you.

Is there a more frustrating feeling for a chainsaw owner than gearing up for a day of yard work
only to find that their trusty mountfield petrol hedge trimmer won’t start The sputtering engine and the pull cord that just won’t budge can be exasperating. But fear not
as we’ve got you covered. In this troubleshooting guide
we’ll delve into the common reasons behind this issue and provide practical solutions to get your hedge trimmer up and running again in no time.

Why Mountfield Petrol Hedge Trimmer Won T Start

1. No fuel

The most common reason for a Mountfield petrol hedge trimmer not starting is that there is no fuel in the tank. Make sure that the tank is full and that the fuel valve is open.

2. Stale fuel

If the fuel in the tank is old and stale, it can cause the trimmer to not start. Try draining the old fuel from the tank and replacing it with fresh fuel.

3. Dirty fuel filter

The fuel filter can become clogged with dirt and debris, preventing fuel from flowing to the engine. Clean or replace the fuel filter if it is dirty.

4. Clogged carburetor

The carburetor can become clogged with dirt and debris, preventing fuel from being properly mixed with air. Clean or replace the carburetor if it is clogged.

5. Bad spark plug

The spark plug can become fouled or damaged, preventing it from creating a spark to ignite the fuel. Check the spark plug and replace it if necessary.

6. Weak spark

The spark plug may be getting a weak spark due to a problem with the ignition coil or the wiring. Check the ignition coil and wiring and replace them if necessary.

7. Low compression

The engine may have low compression, preventing it from starting. Check the compression and repair or replace the engine if necessary.

8. Bad starter motor

The starter motor may be bad, preventing it from turning the engine over. Check the starter motor and replace it if necessary.

How to Troubleshoot: Mountfield Petrol Hedge Trimmer Won’t Start

Symptoms

There are a few different symptoms that may indicate that your Mountfield petrol hedge trimmer is not starting properly. These include:

The engine does not turn over when you press the start button.
The engine starts but then dies immediately.
The engine runs but does not produce any power.
The engine produces a lot of smoke or fumes.
The engine is making strange noises.

Troubleshooting

If your Mountfield petrol hedge trimmer is not starting properly, you can try the following troubleshooting steps:

1. Check the fuel level. Make sure that there is enough fuel in the tank and that the fuel valve is open.
2. Clean the spark plug. Remove the spark plug and clean it with a spark plug cleaner.
3. Check the spark plug gap. The spark plug gap should be between 0.020 and 0.030 inches.
4. Replace the spark plug. If the spark plug is damaged, replace it with a new one.
5. Check the air filter. Remove the air filter and clean it with a clean, dry cloth.
6. Replace the air filter. If the air filter is damaged, replace it with a new one.
7. Check the fuel filter. Remove the fuel filter and inspect it for damage. If the fuel filter is damaged, replace it with a new one.
8. Check the carburetor. If the carburetor is dirty or clogged, it may need to be cleaned or repaired.
9. Check the ignition system. If the ignition system is not working properly, it may need to be repaired or replaced.

If You Still Need Help

If you have tried all of the troubleshooting steps above and your Mountfield petrol hedge trimmer is still not starting properly, you may need to take it to a qualified service technician for further diagnosis and repair.

Also Read THis: My Electric Hedge Trimmer Won T Start

FAQs: Mountfield Petrol Hedge Trimmer Won’t Start

Why won’t my Mountfield petrol hedge trimmer start?

There are a few possible reasons why your Mountfield petrol hedge trimmer won’t start. Here are some of the most common causes and solutions:

The engine is flooded: If the engine is flooded, it will not start because the spark plug is wet. To fix this, turn the choke off and crank the engine several times. If the engine still does not start, you may need to remove the spark plug and dry it with a cloth.

The spark plug is fouled: A fouled spark plug can also prevent the engine from starting. To check the spark plug, remove it from the engine and inspect it for signs of wear or damage. If the spark plug is fouled, you will need to clean or replace it.

The air filter is dirty: A dirty air filter can restrict the flow of air to the engine, which can cause it to stall or not start at all. To check the air filter, remove it from the engine and inspect it for dirt or debris. If the air filter is dirty, you will need to clean or replace it.

The fuel filter is clogged: A clogged fuel filter can prevent the engine from getting enough fuel, which can also cause it to stall or not start at all. To check the fuel filter, remove it from the engine and inspect it for dirt or debris. If the fuel filter is clogged, you will need to clean or replace it.

The carburetor is dirty or out of adjustment: A dirty or out-of-adjustment carburetor can also cause the engine to stall or not start at all. To check the carburetor, you will need to remove it from the engine and clean it. You may also need to adjust the carburetor’s idle speed and mixture screws.

What should I do if my Mountfield petrol hedge trimmer won’t start?

If your Mountfield petrol hedge trimmer won’t start, you should first try to identify the cause of the problem. Once you have identified the cause, you can try to fix it yourself or take the hedge trimmer to a qualified technician. Here are some tips on how to troubleshoot a hedge trimmer that won’t start:

Check the fuel level: Make sure that the fuel tank is full and that the fuel line is not kinked or blocked.

Turn the choke on: The choke is a valve that restricts the flow of air to the engine. When the choke is on, it helps to start the engine by enriching the fuel mixture.

Crank the engine: Once the choke is on, crank the engine several times. If the engine does not start, try turning the choke off and cranking the engine again.

Check the spark plug: If the engine still does not start, remove the spark plug and inspect it for signs of wear or damage. If the spark plug is fouled, clean or replace it.

Check the air filter: A dirty air filter can restrict the flow of air to the engine, which can prevent it from starting. Remove the air filter and inspect it for dirt or debris. If the air filter is dirty, clean or replace it.

Check the fuel filter: A clogged fuel filter can prevent the engine from getting enough fuel, which can also prevent it from starting. Remove the fuel filter and inspect it for dirt or debris. If the fuel filter is clogged, clean or replace it.

Check the carburetor: A dirty or out-of-adjustment carburetor can also prevent the engine from starting. Remove the carburetor and clean it. You may also need to adjust the carburetor’s idle speed and mixture screws.

How can I prevent my Mountfield petrol hedge trimmer from not starting?

There are a few things you can do to prevent your Mountfield petrol hedge trimmer from not starting:

Keep the fuel tank full: A full fuel tank will help to prevent the fuel from evaporating and will also help to prevent the carburetor from becoming clogged.

Use fresh fuel: Old fuel can become stale and can cause problems with the engine. Make sure to use fresh fuel in your hedge trimmer.

Clean the air filter regularly: A dirty air filter can restrict the flow of air to the engine, which can prevent it from starting. Clean the air filter regularly to keep it in good condition.

Check the fuel filter regularly: A clogged fuel filter can prevent the engine from getting enough fuel, which can also prevent it from starting. Check the fuel filter regularly and replace it if it is clogged.

Adjust the carburetor regularly: The

About The Author

I am John, and I am the creator of this website. I have been in the woodworking industry for about 5 years. I developed my passion for DIY projects around the house when I was in high school. I have discovered a new appreciation for those who have the experience to pass along their expertise. They know what works best and are able to help others. I am proud to be among them.

Leave a Comment