Oiler On Chainsaw Not Working

As a chainsaw owner, there’s nothing more frustrating than having your saw not work properly. One of the most common problems that can occur is when the oiler stops working. This can be a major inconvenience, as it can lead to damage to your saw and make it difficult to use.

In this guide, I’ll walk you through the steps to troubleshoot a chainsaw oiler that isn’t working. I’ll cover everything from simple checks to more complex repairs. By the end of this guide, you’ll be able to identify and fix the problem, so you can get back to using your saw in no time.

Most Common Reasons Of Oiler On Chainsaw Not Working

Most Common Reasons Of Oiler On Chainsaw Not Working

Chainsaw Chain Too Tight

If the chainsaw chain is too tight, it can prevent the oiler from properly distributing oil to the chain. To check if the chain is too tight, try to move it up and down with your fingers. If it is difficult to move, it is too tight. Loosen the chain tensioner until the chain moves freely.

Chainsaw Chain Too Loose

If the chainsaw chain is too loose, it can also prevent the oiler from properly distributing oil to the chain. To check if the chain is too loose, try to move it up and down with your fingers. If it is too easy to move, it is too loose. Tighten the chain tensioner until the chain moves freely, but not too tightly.

Chainsaw Oiler Hose Clogged

The oiler hose can become clogged with sawdust and debris, which can prevent oil from reaching the chain. To check if the oiler hose is clogged, try to blow through it with compressed air. If you can’t blow through it, it is clogged and will need to be cleaned.

Chainsaw Oiler Pump Malfunctioning

The chainsaw oiler pump can malfunction if it is damaged or worn out. To check if the oiler pump is malfunctioning, try to operate it manually. If it does not pump oil, it is malfunctioning and will need to be replaced.

Chainsaw Oiler Reservoir Empty

If the chainsaw oiler reservoir is empty, the oiler will not be able to distribute oil to the chain. To check if the oiler reservoir is empty, look at the sight glass or level indicator. If the reservoir is empty, fill it with oil.

How to Troubleshoot: Oiler on Chainsaw Not Working

Your chainsaw’s oiler is an important part of keeping your saw running smoothly. It helps to lubricate the chain and bar, preventing wear and tear. If your oiler isn’t working properly, it can cause your chain to overheat and wear out quickly.

There are a few different things that can cause an oiler to stop working. In this article, we’ll walk you through the steps to troubleshoot the problem and get your saw back up and running.

Step 1: Check the oil level

The first thing you need to do is check the oil level in your chainsaw. If the oil level is low, it can cause the oiler to stop working. To check the oil level, follow these steps:

1. Turn off the chainsaw and let it cool down.
2. Remove the oil cap.
3. Use the dipstick to check the oil level.
4. If the oil level is low, add more oil to the chainsaw.

Step 2: Check the oil filter

The oil filter is located on the bottom of the chainsaw. It helps to keep dirt and debris from clogging the oiler. If the oil filter is clogged, it can prevent the oil from flowing to the chain and bar. To check the oil filter, follow these steps:

1. Turn off the chainsaw and let it cool down.
2. Remove the oil cap.
3. Remove the oil filter.
4. Inspect the oil filter for dirt and debris.
5. If the oil filter is clogged, replace it with a new one.

Step 3: Check the oil line

The oil line connects the oil tank to the oiler. If the oil line is damaged or kinked, it can prevent the oil from flowing to the chain and bar. To check the oil line, follow these steps:

1. Turn off the chainsaw and let it cool down.
2. Remove the oil cap.
3. Locate the oil line.
4. Inspect the oil line for damage or kinks.
5. If the oil line is damaged, replace it with a new one.

Step 4: Check the oil pump

The oil pump is responsible for pumping oil to the chain and bar. If the oil pump is damaged, it can prevent the oil from flowing to the chain and bar. To check the oil pump, follow these steps:

1. Turn off the chainsaw and let it cool down.
2. Remove the oil cap.
3. Locate the oil pump.
4. Inspect the oil pump for damage.
5. If the oil pump is damaged, replace it with a new one.

Step 5: Check the oiler switch

The oiler switch is a small switch that turns the oiler on and off. If the oiler switch is turned off, it will prevent the oil from flowing to the chain and bar. To check the oiler switch, follow these steps:

1. Turn off the chainsaw and let it cool down.
2. Locate the oiler switch.
3. Inspect the oiler switch for damage.
4. If the oiler switch is damaged, replace it with a new one.

Step 6: Reset the oiler

Some chainsaws have a reset button on the oiler. If the oiler is not working, you may need to reset it. To reset the oiler, follow these steps:

1. Turn off the chainsaw and let it cool down.
2. Locate the reset button on the oiler.
3. Press the reset button.

Conclusion

If you’ve tried all of these steps and your oiler is still not working, you may need to take your chainsaw to a qualified repair shop.

FAQs: Oiler on Chainsaw Not Working

Why is the oiler on my chainsaw not working?

There are a few possible reasons why the oiler on your chainsaw may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to deliver oil to the chain. This can be caused by dirt, sawdust, or other debris getting into the oiler. To fix this, you will need to clean the oiler.
The oiler may be empty. If the oiler is empty, it will not be able to deliver oil to the chain. To fix this, you will need to add oil to the oiler.
The oiler may be turned off. If the oiler is turned off, it will not be able to deliver oil to the chain. To fix this, you will need to turn the oiler on.
The oiler may be defective. If the oiler is defective, it will not be able to deliver oil to the chain. To fix this, you will need to replace the oiler.

What can I do to prevent the oiler on my chainsaw from not working?

There are a few things you can do to prevent the oiler on your chainsaw from not working.

Keep the oiler clean. Make sure to clean the oiler regularly to prevent dirt, sawdust, or other debris from getting into it.
Keep the oiler full. Make sure to keep the oiler full so that it can always deliver oil to the chain.
Turn the oiler on. Make sure to turn the oiler on so that it can deliver oil to the chain.
Replace the oiler if it is defective. If the oiler is defective, replace it with a new one so that it can properly deliver oil to the chain.

What happens if the oiler on my chainsaw is not working?

If the oiler on your chainsaw is not working, it can cause a number of problems.

The chain may become dry and overheated. If the chain does not receive enough oil, it can become dry and overheated. This can damage the chain and make it more likely to break.
The chain may skip. If the chain does not receive enough oil, it can skip. This can make it difficult to control the chainsaw and can lead to accidents.
The chainsaw may be damaged. If the chain becomes dry and overheated, it can damage the chainsaw. This can include damage to the bar, the chain, and the engine.

How do I fix the oiler on my chainsaw?

If the oiler on your chainsaw is not working, you can fix it by following these steps.

1. Turn off the chainsaw and disconnect the spark plug wire. This will prevent the chainsaw from starting accidentally while you are working on it.
2. Locate the oiler. The oiler is usually located on the side of the chainsaw.
3. Remove the oiler cover. The oiler cover is usually held in place by a few screws. Remove the screws to remove the cover.
4. Inspect the oiler. Look for signs of damage, such as cracks or leaks. If the oiler is damaged, replace it with a new one.
5. Clean the oiler. Use a clean rag to wipe off any dirt, sawdust, or other debris from the oiler.
6. Reassemble the oiler. Put the oiler cover back on and tighten the screws.
7. Reconnect the spark plug wire.
8. Start the chainsaw and test the oiler. The oiler should now be working properly.

What if I can’t fix the oiler on my chainsaw?

If you can’t fix the oiler on your chainsaw, you can take it to a qualified repair shop. They will be able to diagnose the problem and fix it for you.

Next Post You May Like: Play Day Chainsaw Bubble Maker Not Working