Here’s What to Do
Your Oregon electric chainsaw is a powerful tool that can make quick work of cutting firewood, clearing brush, and trimming trees. But when it won’t start, it can be a major inconvenience.
In this blog post, I’ll walk you through the steps to troubleshoot a chainsaw that won’t start. I’ll cover everything from checking the battery to inspecting the spark plug. By the end of this post, you’ll be able to get your chainsaw running again in no time.
So if your , don’t despair. Just follow the steps below, and you’ll be back to cutting in no time.
So Oregon Electric Chainsaw Won’T Start
Oregon Electric Chainsaw Won’t Start: 5 Steps to Troubleshoot
1. Check the power cord:
Make sure that the power cord is plugged in securely to both the chainsaw and the outlet.
2. Check the battery:
Make sure that the battery is charged and properly inserted into the chainsaw.3. Check the air filter:
If the air filter is dirty, it can restrict airflow and cause the chainsaw to not start. Clean the air filter according to the manufacturer’s instructions.
4. Check the spark plug:
Make sure that the spark plug is properly installed and that the electrodes are clean.
5. Inspect the chainsaw for damage:
Look for any damage to the chainsaw that could be preventing it from starting. If you find any damage, repair it before trying to start the chainsaw again.
Oregon Electric Chainsaw Won’t Start
Troubleshooting
If your Oregon electric chainsaw won’t start, there are a few things you can check to troubleshoot the problem.
Check the battery:
Make sure that the battery is charged and properly connected to the chainsaw. If the battery is not charged, you can charge it using the charger that came with the chainsaw. If the battery is properly connected but still not working, you may need to replace the battery.
Check the spark plug:
The spark plug is responsible for igniting the fuel in the chainsaw. If the spark plug is dirty or damaged, it can cause the chainsaw to not start. To check the spark plug, remove it from the chainsaw and inspect it for damage. If the spark plug is dirty, you can clean it with a wire brush. If the spark plug is damaged, you will need to replace it.
Check the fuel filter:
The fuel filter prevents dirt and debris from entering the carburetor. If the fuel filter is clogged, it can restrict the flow of fuel to the carburetor and cause the chainsaw to not start. To check the fuel filter, remove it from the chainsaw and inspect it for damage. If the fuel filter is clogged, you can clean it with a clean rag. If the fuel filter is damaged, you will need to replace it.
Check the carburetor:
The carburetor is responsible for mixing the fuel and air in the correct proportions. If the carburetor is not adjusted properly, it can cause the chainsaw to not start. To check the carburetor, you will need to remove it from the chainsaw and adjust the carburetor according to the manufacturer’s instructions.
How to Start a Chainsaw That Won’t Start
Once you have troubleshooted the problem and determined the cause of the issue, you can follow these steps to start your chainsaw:
1. Make sure that the chainsaw is in the off position.
2. Check the fuel level and add fuel if necessary.
3. Check the oil level and add oil if necessary.
4. Inspect the spark plug and clean or replace it if necessary.
5. Inspect the fuel filter and clean or replace it if necessary.
6. Adjust the carburetor if necessary.
7. Pull the starter rope slowly until you feel resistance.
8. Pull the starter rope quickly and firmly until the chainsaw starts.
Preventative Maintenance
The best way to prevent your Oregon electric chainsaw from not starting is to perform regular preventative maintenance. This includes:
Cleaning the chainsaw after each use.
Inspecting the spark plug and fuel filter regularly.
Adjusting the carburetor regularly.
Storing the chainsaw in a cool, dry place.
By following these simple tips, you can help keep your Oregon electric chainsaw running smoothly and prevent it from not starting.
Also Read THis: Poulan Electric Chainsaw Won’T Start
FAQs: Oregon Electric Chainsaw Won’t Start
Why won’t my Oregon electric chainsaw start?
There are a few possible reasons why your Oregon electric chainsaw won’t start. Here are some of the most common causes:
The battery is dead: Make sure that the battery is fully charged and that the connections are tight.
The spark plug is fouled: Clean or replace the spark plug.
The carburetor is dirty: Clean the carburetor according to the manufacturer’s instructions.
The air filter is dirty: Clean or replace the air filter.
The chainsaw is out of oil: Add oil to the chainsaw until the oil level is between the full and add marks on the oil reservoir.
How do I start my Oregon electric chainsaw?
To start your Oregon electric chainsaw, follow these steps:
1. Make sure that the chainsaw is turned off and that the chain brake is engaged.
2. Pull the choke lever to the choke position.
3. Press the primer bulb several times.
4. Move the throttle lever to the fast position.
5. Grasp the chainsaw firmly with both hands and pull the starter rope until the engine starts.
What should I do if my Oregon electric chainsaw starts but dies immediately?
If your Oregon electric chainsaw starts but dies immediately, there are a few possible causes:
The carburetor is not adjusted properly: Adjust the carburetor according to the manufacturer’s instructions.
The spark plug is fouled: Clean or replace the spark plug.
The air filter is dirty: Clean or replace the air filter.
The chainsaw is out of oil: Add oil to the chainsaw until the oil level is between the full and add marks on the oil reservoir.
What should I do if my Oregon electric chainsaw is running but the chain isn’t moving?
If your Oregon electric chainsaw is running but the chain isn’t moving, there are a few possible causes:
The chain brake is engaged: Make sure that the chain brake is disengaged.
The clutch is not engaged: Move the throttle lever to the fast position to engage the clutch.
The chain is too tight: Loosen the chain tensioner until the chain is loose enough to move freely.
The chain is too loose: Tighten the chain tensioner until the chain is snug against the bar.
What should I do if my Oregon electric chainsaw is making a strange noise?
If your Oregon electric chainsaw is making a strange noise, there are a few possible causes:
The chain is rubbing against the bar: Make sure that the chain is properly aligned with the bar.
The chain is too tight: Loosen the chain tensioner until the chain is loose enough to move freely.
The chain is too loose: Tighten the chain tensioner until the chain is snug against the bar.
The chainsaw is out of oil: Add oil to the chainsaw until the oil level is between the full and add marks on the oil reservoir.
How can I prevent my Oregon electric chainsaw from starting problems?
Here are a few tips to help prevent your Oregon electric chainsaw from starting problems:
Store the chainsaw in a cool, dry place:
Keep the chainsaw clean and free of debris:
Replace the spark plug and air filter regularly:
Check the oil level regularly and add oil as needed:
Adjust the carburetor according to the manufacturer’s instructions:
By following these tips, you can help keep your Oregon electric chainsaw running smoothly and prevent starting problems.
