If your Black & Decker hedge trimmer cord won’t pull, it could be due to a jammed trigger, a faulty switch, or a loose or damaged cord. To troubleshoot the issue, first check the trigger to make sure it’s not jammed. If the trigger is clear, check the switch to make sure it’s turned on. Finally, inspect the cord for any damage. If you find any damage, replace the cord.

Black and Decker hedge trimmer not working. Inspect for loose or damaged parts, and check the power cord for damage. If the trimmer still does not work, contact customer service.

If your Black and Decker hedge trimmer won’t turn on, it could be due to a number of reasons. Here are a few things to check

Make sure the trimmer is plugged in and turned on.
Check the battery to make sure it is charged.
Check the switch to make sure it is in the On position.
Clean the trimmer’s air filter.
Inspect the trimmer’s spark plug for damage.

If your hedge trimmer starts but won’t run, it could be due to a number of reasons. Here are a few possible causes and solutions

The trimmer is not getting enough gas. Make sure the gas tank is full and that the fuel line is clear.
The spark plug is dirty or damaged. Remove the spark plug and clean it with a wire brush. If the spark plug is damaged, replace it.
The air filter is dirty. Remove the air filter and clean it with a dry cloth.
The carburetor is dirty or out of adjustment. Clean the carburetor or have it adjusted by a qualified technician.

The hedge trimmer is working but not cutting because the blades are dull. To sharpen the blades, remove the screws that hold the blades in place and use a file to sharpen the edges. Once the blades are sharp, replace the screws and test the trimmer on a piece of wood.

Hedge trimmer carefully trimming blackberry bushes in a garden.

Hedge trimmer won’t stay running

Possible causes

Low oil level
Dirty air filter
Clogged fuel filter
Faulty spark plug
Bad fuel
Engine overheating

If your hedge trimmer won’t start when hot, try letting it cool down for a few minutes. If that doesn’t work, you may need to clean the spark plug or replace the fuel filter.

The hedge trimmer won’t stay running because the spark plug is dirty. Clean the spark plug with a wire brush and reattach it.

If the hedge trimmer won’t start when hot, try letting it cool down for a few minutes before starting it again. If it still won’t start, check the air filter and spark plug for damage or blockage.