Ryobi Chainsaw Ran Outta Gas When Refilled Won’t Run
Your Ryobi chainsaw is a powerful tool that can make quick work of cutting through branches and logs. But what happens when you run out of gas and try to refill it, only to find that the chainsaw won’t start
In this blog post, we’ll discuss the most common reasons why a Ryobi chainsaw won’t start after running out of gas, and we’ll provide some tips on how to fix the problem.
So if you’re having trouble getting your Ryobi chainsaw started, read on for help!
Ryobi Chainsaw Ran Outta Gas When Refilled Won’T Run
Ryobi chainsaw won’t start after running out of gas because the carburetor is flooded. To fix this, remove the gas tank and carburetor. Turn the chainsaw upside down and drain the gas from the carburetor bowl. Use a small screwdriver to pry open the choke valve and clean it with a wire brush. Reinstall the carburetor and gas tank. Prime the chainsaw by pulling the starter rope several times.
What to Do When Your Ryobi Chainsaw Won’t Run After Running Out of Gas
Check the Fuel System
If your Ryobi chainsaw won’t run after refilling with gas
start by checking the fuel system. Ensure that the fuel tank is filled with the correct fuel mixture recommended by Ryobi for your chainsaw model. Additionally
inspect the fuel lines for any signs of damage or blockage.
Inspect the Air Filter
A clogged or dirty air filter can prevent the chainsaw from running smoothly. Remove the air filter and clean it thoroughly. If the air filter is damaged or excessively dirty
consider replacing it with a new one.
Examine the Spark Plug
A faulty or fouled spark plug can also cause the chainsaw to not run properly. Remove the spark plug and inspect it for signs of wear
damage
or fouling. Clean or replace the spark plug as needed according to the manufacturer’s recommendations.
Check for Flooding
If the chainsaw was repeatedly attempted to start after refilling with gas
it may have become flooded. To address this
remove the spark plug and pull the starter cord several times to clear any excess fuel from the combustion chamber.
Inspect the Carburetor
The carburetor may need to be adjusted or cleaned if the chainsaw is not running properly after refilling with gas. Ensure that the carburetor is functioning correctly and adjust the settings according to the manufacturer’s specifications.
Seek Professional Assistance
If the above steps do not resolve the issue
it may be best to seek professional assistance from a certified Ryobi repair technician or a qualified power tool repair professional. They can diagnose and address any underlying issues that may be preventing the chainsaw from running after refilling with gas.
Also Read THis: Stihl Chainsaw Ran Out Of Gas Won’T Start
FAQs
Why won’t my Ryobi chainsaw start after I refilled it with gas?
There are a few possible reasons why your Ryobi chainsaw won’t start after you refilled it with gas.
The carburetor is flooded: When you refill the chainsaw with gas, some of the gas can get into the carburetor. This can cause the carburetor to flood, which will prevent the chainsaw from starting. To fix this problem, you can try to clear the carburetor by following the instructions in your chainsaw’s owner’s manual.
The spark plug is fouled: The spark plug is responsible for igniting the fuel in the chainsaw’s engine. If the spark plug is fouled, it will not be able to properly ignite the fuel, which will prevent the chainsaw from starting. To fix this problem, you can try cleaning the spark plug by following the instructions in your chainsaw’s owner’s manual.
The air filter is dirty: The air filter helps to keep dirt and debris from getting into the chainsaw’s engine. If the air filter is dirty, it will restrict the flow of air to the engine, which can cause the chainsaw to start slowly or not at all. To fix this problem, you can try cleaning the air filter by following the instructions in your chainsaw’s owner’s manual.
The engine is out of oil: The engine needs oil to lubricate the moving parts. If the engine is out of oil, it will not be able to run properly, which can prevent it from starting. To fix this problem, you can try adding oil to the engine by following the instructions in your chainsaw’s owner’s manual.
The chainsaw is not getting enough spark: The chainsaw needs a spark to ignite the fuel in the engine. If the chainsaw is not getting enough spark, it will not be able to start. To fix this problem, you can try checking the spark plug wire and spark plug cap to make sure they are connected properly. You can also try replacing the spark plug.
What should I do if my Ryobi chainsaw won’t start?
If your Ryobi chainsaw won’t start, you can try the following troubleshooting steps:
1. Check the fuel level. Make sure that the chainsaw has enough fuel.
2. Check the spark plug. Make sure that the spark plug is properly installed and that the gap is correct.
3. Check the air filter. Make sure that the air filter is clean.
4. Check the oil level. Make sure that the engine has the correct amount of oil.
5. Check the spark plug wire and spark plug cap. Make sure that they are connected properly.
6. Try starting the chainsaw again. If the chainsaw still won’t start, you may need to take it to a qualified service center for repairs.
How can I prevent my Ryobi chainsaw from running out of gas?
To prevent your Ryobi chainsaw from running out of gas, you can follow these tips:
Check the fuel level regularly: Make sure that the chainsaw has enough fuel before you use it.
Don’t let the chainsaw run out of gas completely: If the chainsaw runs out of gas completely, it can damage the carburetor.
Store the chainsaw with the fuel tank full: This will help to prevent the carburetor from becoming flooded.
Use a fuel stabilizer: A fuel stabilizer will help to prevent the fuel from going bad.
What are the signs that my Ryobi chainsaw needs a tune-up?
There are a few signs that your Ryobi chainsaw may need a tune-up. These include:
The chainsaw starts slowly or not at all.
The chainsaw runs rough or stalls.
The chainsaw smokes excessively.
The chainsaw loses power.
The chainsaw emits a loud noise.
If you notice any of these signs, it is a good idea to take your chainsaw to a qualified service center for a tune-up.
How often should I tune up my Ryobi chainsaw?
The frequency with which you should tune up your Ryobi chainsaw depends on how often you use it. If you use your chainsaw frequently, you should have it tuned up every 25 to 50 hours of use. If you use your chainsaw less frequently, you can have it tuned up every 50 to 100 hours of use.
