Your Simoniz pressure washer is one of the most valuable tools in your home improvement arsenal. It can help you clean everything from your driveway to your siding, but it’s no good if the motor isn’t working. If your Simoniz pressure washer motor isn’t working, you’re not alone. This is a common problem, but it’s usually easy to fix. In this guide, we’ll walk you through the steps to troubleshoot and repair a Simoniz pressure washer motor. So, if your pressure washer is acting up, don’t despair. Just follow these steps, and you’ll be back to cleaning in no time.
Reasons Why Simoniz Pressure Washer Motor Not Working
No power to the motor
The power cord is not plugged in or is not plugged in all the way.
The circuit breaker is tripped.
The pressure washer is not grounded properly.
The motor is burned out.
Clogged water inlet
The water inlet filter is clogged.
The water hose is kinked or collapsed.
The water pump is clogged.
Clogged air outlet
The air filter is clogged.
The exhaust port is clogged.
Low oil level
The oil level in the pressure washer is too low.
Faulty pressure switch
The pressure switch is not working properly.
Faulty pump
The pump is not working properly.
How to Troubleshoot And Fix: Simoniz Pressure Washer Motor Not Working
Symptoms of a Pressure Washer Motor Not Working
There are a few different symptoms that can indicate that your Simoniz pressure washer motor is not working properly. These include:
The pressure washer won’t start at all
The pressure washer starts but then dies shortly after
The pressure washer makes a strange noise when it’s running
The pressure washer doesn’t produce enough pressure
Troubleshooting a Pressure Washer Motor Not Working
If your Simoniz pressure washer motor is not working, you can troubleshoot the problem by following these steps:
1. Check the power cord:
Make sure that the power cord is plugged in securely to the pressure washer and to an outlet that is working properly.
2. Check the circuit breaker:
If the pressure washer is plugged in but it’s not starting, check the circuit breaker to make sure that it’s not tripped.3. Check the oil level:
If the pressure washer is starting but then dying shortly after, check the oil level to make sure that it’s not too low.
4. Check the air filter:
If the pressure washer is making a strange noise when it’s running, check the air filter to make sure that it’s not clogged.
5. Check the spark plug:
If the pressure washer is not producing enough pressure, check the spark plug to make sure that it’s not damaged or fouled.
How to Fix a Pressure Washer Motor Not Working
Once you’ve identified the problem with your Simoniz pressure washer motor, you can fix it by following these steps:
1. Replace the power cord:
If the power cord is damaged, you can replace it with a new one.
2. Reset the circuit breaker:
If the circuit breaker is tripped, you can reset it by flipping it to the Off position and then back to the On position.3. Add oil to the pressure washer:
If the oil level is too low, you can add oil to the pressure washer until the level reaches the full mark on the dipstick.
4. Clean the air filter:
If the air filter is clogged, you can clean it by removing it from the pressure washer and blowing it out with compressed air.
5. Replace the spark plug:
If the spark plug is damaged or fouled, you can replace it with a new one.
Preventing Pressure Washer Motor Problems
You can help prevent pressure washer motor problems by following these tips:
Keep the pressure washer clean:
Make sure to clean the pressure washer after each use to prevent dirt and debris from building up and causing problems.
Inspect the pressure washer regularly:
Inspect the pressure washer regularly for signs of wear and tear, and replace any damaged parts as soon as possible.
Use the pressure washer properly:
Use the pressure washer according to the manufacturer’s instructions to prevent damage to the motor.
By following these tips, you can help keep your Simoniz pressure washer motor running smoothly for years to come.
Also Read THis: Simoniz Pressure Washer Soap Not Working
FAQs: Simoniz Pressure Washer Motor Not Working
Why is my Simoniz pressure washer motor not working?
There are a few possible reasons why your Simoniz pressure washer motor may not be working. Here are some of the most common causes:
The motor is overheating: If the motor is overheating, it will automatically shut off to prevent damage. This can happen if the pressure washer is used for too long at a high pressure setting, or if the air filter is clogged.
The motor is overloaded: If the pressure washer is used to clean a surface that is too dirty or has too much build-up, the motor can be overloaded and overheat.
The motor is not getting enough power: If the pressure washer is not plugged into an outlet that is providing enough power, the motor may not be able to start or may not run at full power.
The motor is damaged: If the motor has been damaged by overheating, overloading, or lack of power, it may need to be repaired or replaced.
How do I fix a Simoniz pressure washer motor that is not working?
If your Simoniz pressure washer motor is not working, you can try the following troubleshooting steps:
1. Check the air filter: If the air filter is clogged, it can prevent the motor from getting enough air and can cause it to overheat. Clean the air filter according to the manufacturer’s instructions.
2. Check the pressure washer’s hose: If the hose is kinked or damaged, it can restrict the flow of water and can cause the motor to overheat. Check the hose for any damage and replace it if necessary.
3. Check the outlet: Make sure that the pressure washer is plugged into an outlet that is providing enough power. If the outlet is not providing enough power, try plugging the pressure washer into a different outlet.
4. Inspect the motor: If the motor is damaged, it may need to be repaired or replaced. If you are not comfortable inspecting or repairing the motor, take the pressure washer to a qualified service center.
What should I do if my Simoniz pressure washer motor is still not working after troubleshooting?
If you have tried the troubleshooting steps above and your Simoniz pressure washer motor is still not working, you should take the pressure washer to a qualified service center. A qualified technician will be able to diagnose the problem and make the necessary repairs.
How can I prevent my Simoniz pressure washer motor from breaking down?
There are a few things you can do to prevent your Simoniz pressure washer motor from breaking down:
Use the pressure washer according to the manufacturer’s instructions: This includes using the correct pressure setting for the job and not overloading the pressure washer.
Clean the air filter regularly: A clogged air filter can restrict the flow of air to the motor and can cause it to overheat.
Inspect the hose regularly for damage: A kinked or damaged hose can restrict the flow of water and can cause the motor to overheat.
Store the pressure washer in a cool, dry place: Extreme heat or cold can damage the motor.
Have the pressure washer serviced regularly: A qualified technician can inspect the pressure washer for any problems and make the necessary repairs.
By following these tips, you can help to prevent your Simoniz pressure washer motor from breaking down.
