Your Simpson pressure washer is a powerful tool that can make quick work of cleaning your home, car, or other outdoor surfaces. But when the wand trigger doesn’t work, it can be a major inconvenience. Not only is it frustrating, but it can also be dangerous if you try to use the pressure washer without the wand trigger.
In this guide, we’ll troubleshoot the common issue of a . We’ll start by explaining how the wand trigger works and then we’ll go over some of the most common causes of this problem. We’ll also provide some tips on how to fix the issue yourself.
So if you’re dealing with a Simpson pressure washer wand trigger that’s not working, read on for help!
Why Simpson Pressure Washer Wand Trigger Not Working
1. Trigger is stuck
– The trigger may be stuck due to dirt or debris.
– To fix this, remove the trigger from the wand and clean it with a brush or cloth.
– If the trigger is still stuck, you may need to replace it.
2. Trigger is broken
– The trigger may be broken if it is cracked or damaged.
– To fix this, you will need to replace the trigger.
3. O-ring is damaged
– The O-ring is a small rubber ring that seals the trigger to the wand.
– If the O-ring is damaged, it will allow water to leak out of the trigger and prevent it from working properly.
– To fix this, you will need to replace the O-ring.
4. Wand is clogged
– The wand may be clogged with dirt or debris.
– To fix this, remove the wand from the pressure washer and clean it with a brush or cloth.
– If the wand is still clogged, you may need to replace it.
How to Troubleshoot And Fix: Simpson Pressure Washer Wand Trigger Not Working
Symptoms
There are a few different symptoms that you may experience if your Simpson pressure washer wand trigger is not working properly. These include:
The trigger does not engage, even when you pull it.
The trigger engages, but the water does not come out of the wand.
The water comes out of the wand in a weak or inconsistent stream.
The water comes out of the wand in a high-pressure stream, even when you do not have the trigger engaged.
Causes
There are a number of different things that could cause your Simpson pressure washer wand trigger to stop working properly. These include:
A clogged wand tip.
A faulty wand switch.
A faulty pressure washer pump.
A faulty pressure washer hose.
Troubleshooting
The first step to troubleshooting your Simpson pressure washer wand trigger is to identify the cause of the problem. To do this, you will need to perform a series of checks and tests.
Check the wand tip for clogs:
The most common cause of a pressure washer wand trigger not working is a clogged wand tip. To check for a clog, remove the wand tip from the wand and inspect it for any debris. If you find any debris, remove it using a toothpick or other small, pointed object.
Check the wand switch:
If the wand tip is not clogged, the next step is to check the wand switch. To do this, turn off the pressure washer and disconnect the wand from the pump. Then, use a multimeter to check the resistance of the wand switch. The resistance should be between 500 and 1,000 ohms. If the resistance is too high or too low, the wand switch is faulty and will need to be replaced.
Check the pressure washer pump:
If the wand switch is not faulty, the next step is to check the pressure washer pump. To do this, turn on the pressure washer and allow it to build up pressure. Then, disconnect the wand from the pump and hold the wand tip over a bucket. If the pump is working properly, you should see a strong stream of water coming out of the wand tip. If the stream of water is weak or nonexistent, the pump is faulty and will need to be repaired or replaced.
Check the pressure washer hose:
If the pump is working properly, the next step is to check the pressure washer hose. To do this, disconnect the hose from the pump and inspect it for any damage. If the hose is damaged, it will need to be replaced.
Fixing the Problem
Once you have identified the cause of the problem, you can fix it accordingly. If the wand tip is clogged, you can simply clean it out. If the wand switch is faulty, you will need to replace it. If the pressure washer pump is faulty, you will need to repair or replace it. If the pressure washer hose is damaged, you will need to replace it.
Preventing Future Problems
To prevent future problems with your Simpson pressure washer wand trigger, you can take a few simple steps:
Keep the wand tip clean.
Avoid using the pressure washer at high pressure settings.
Inspect the pressure washer regularly for signs of damage.
Replace worn or damaged parts as soon as possible.
By following these simple steps, you can help to keep your Simpson pressure washer wand trigger working properly for years to come.
FAQs: Simpson Pressure Washer Wand Trigger Not Working
Why is my Simpson pressure washer wand trigger not working?
There are a few possible reasons why your Simpson pressure washer wand trigger might not be working. Here are some of the most common causes:
The trigger is stuck: If the trigger is stuck, it won’t be able to move freely and activate the pressure washer. To fix this, try spraying some WD-40 or a similar lubricant into the trigger and working it back and forth until it’s free.
The trigger is broken: If the trigger is broken, it won’t be able to activate the pressure washer. To fix this, you’ll need to replace the trigger.
The hose is kinked: If the hose is kinked, it will restrict the flow of water and prevent the pressure washer from working properly. To fix this, straighten out the hose.
The pressure washer is not getting enough water: If the pressure washer is not getting enough water, it won’t be able to generate enough pressure to work properly. To fix this, make sure that the water supply is turned on and that the hose is connected properly.
The pressure washer is not producing enough pressure: If the pressure washer is not producing enough pressure, it won’t be able to clean effectively. To fix this, check the pressure rating of the pressure washer and make sure that it’s compatible with the task you’re trying to do.
How do I fix a stuck Simpson pressure washer wand trigger?
To fix a stuck Simpson pressure washer wand trigger, follow these steps:
1. Turn off the pressure washer and disconnect the hose from the wand.
2. Spray some WD-40 or a similar lubricant into the trigger.
3. Work the trigger back and forth until it’s free.
4. Reattach the hose to the wand and turn on the pressure washer.
How do I replace a Simpson pressure washer wand trigger?
To replace a Simpson pressure washer wand trigger, follow these steps:
1. Turn off the pressure washer and disconnect the hose from the wand.
2. Remove the screws that hold the old trigger in place.
3. Disconnect the electrical connector from the old trigger.
4. Install the new trigger and tighten the screws.
5. Reconnect the electrical connector and attach the hose to the wand.
How do I fix a kinked Simpson pressure washer hose?
To fix a kinked Simpson pressure washer hose, follow these steps:
1. Turn off the pressure washer and disconnect the hose from the wand.
2. Find the kink in the hose and straighten it out.
3. Reattach the hose to the wand and turn on the pressure washer.
How do I make sure my Simpson pressure washer is getting enough water?
To make sure your Simpson pressure washer is getting enough water, follow these steps:
1. Check the water supply to make sure that it’s turned on and that there’s no obstructions in the line.
2. Make sure that the hose is connected properly to the pressure washer and to the water source.
3. Check the pressure rating of the pressure washer and make sure that it’s compatible with the task you’re trying to do.
How do I increase the pressure of my Simpson pressure washer?
To increase the pressure of your Simpson pressure washer, follow these steps:
1. Check the pressure rating of the pressure washer and make sure that it’s compatible with the task you’re trying to do.
2. If the pressure washer is not rated for the task you’re trying to do, you can increase the pressure by using a higher-pressure nozzle.
3. You can also increase the pressure by opening the water supply valve more.
Note: Increasing the pressure of your pressure washer can increase the risk of injury. Be careful when using a high-pressure washer and always wear safety glasses.
Also Read: Snap On Pressure Washer Not Working
