Stihl Chainsaw Auto Oiler Not Working
As a chainsaw owner, there’s nothing more frustrating than having your saw’s auto oiler stop working. Not only does it mean that your saw is no longer being properly lubricated, but it can also lead to costly repairs down the road.
If your Stihl chainsaw auto oiler isn’t working, don’t panic. In this guide, we’ll walk you through the steps to troubleshoot and resolve the issue quickly and easily.
We’ll start by discussing the common causes of a malfunctioning auto oiler, and then we’ll provide step-by-step instructions on how to diagnose and fix the problem. By the end of this guide, you’ll be able to get your saw back up and running in no time.
Most Common Reasons Of Stihl Chainsaw Auto Oiler Not Working
Most Common Reasons Of Stihl Chainsaw Auto Oiler Not Working
1. Oiler Hose Clogged
The most common reason for a Stihl chainsaw auto oiler not working is a clogged oiler hose. This can be caused by dirt, sawdust, or other debris getting into the hose and blocking the flow of oil. To fix this problem, you will need to clean the oiler hose.
2. Oiler Pump Malfunction
Another common reason for a Stihl chainsaw auto oiler not working is a malfunction of the oiler pump. This can be caused by a damaged pump, a faulty gasket, or a clogged filter. To fix this problem, you will need to replace the oiler pump or the damaged parts.
3. Low Oil Level
If the oil level in the chainsaw is too low, the oiler will not be able to pump oil to the chain. To fix this problem, you will need to add oil to the chainsaw until the level is correct.
4. Oiler Switch Defective
The oiler switch on a Stihl chainsaw can malfunction, which will prevent the oiler from working. To fix this problem, you will need to replace the oiler switch.
5. Misaligned Oiler Tube
The oiler tube on a Stihl chainsaw can become misaligned, which will prevent the oil from reaching the chain. To fix this problem, you will need to realign the oiler tube.
How to Troubleshoot: Stihl Chainsaw Auto Oiler Not Working
Symptoms of a Stihl Chainsaw Auto Oiler Not Working
There are a few symptoms that can indicate that your Stihl chainsaw auto oiler is not working properly. These include:
The chainsaw is running out of oil more quickly than usual.
The chainsaw is smoking or making black exhaust smoke.
The chainsaw’s chain is getting hot and smoking.
The chainsaw’s chain is dulling quickly.
If you notice any of these symptoms, it’s important to troubleshoot the problem and fix it as soon as possible. A malfunctioning auto oiler can damage your chainsaw and make it dangerous to use.
How to Troubleshoot a Stihl Chainsaw Auto Oiler
To troubleshoot a Stihl chainsaw auto oiler, you will need to:
1. Check the oil level.
2. Check the oil line.
3. Check the oil pump.
4. Check the oil filter.
5. Check the oil reservoir.
1. Check the oil level
The first step is to check the oil level in the chainsaw’s reservoir. To do this, remove the oil cap and check the level of oil in the reservoir. The oil level should be between the full and add marks on the reservoir. If the oil level is low, add oil to the reservoir until it reaches the full mark.
2. Check the oil line
The next step is to check the oil line. The oil line runs from the oil reservoir to the oil pump. To check the oil line, follow these steps:
1. Remove the oil cap from the chainsaw.
2. Locate the oil line. The oil line is a small, black hose that runs from the oil reservoir to the oil pump.
3. Inspect the oil line for leaks. If you see any leaks, you will need to replace the oil line.
3. Check the oil pump
The oil pump is responsible for pumping oil to the chainsaw’s chain. To check the oil pump, follow these steps:
1. Remove the oil cap from the chainsaw.
2. Locate the oil pump. The oil pump is a small, black cylinder that is located near the chainsaw’s engine.
3. Inspect the oil pump for damage. If you see any damage, you will need to replace the oil pump.
4. Check the oil filter
The oil filter is located in the oil reservoir. The oil filter helps to keep dirt and debris out of the oil system. To check the oil filter, follow these steps:
1. Remove the oil cap from the chainsaw.
2. Locate the oil filter. The oil filter is a small, cylindrical filter that is located in the oil reservoir.
3. Remove the oil filter and inspect it for dirt and debris. If the oil filter is dirty, you will need to replace it.
5. Check the oil reservoir
The oil reservoir is the tank that holds the oil for the chainsaw. To check the oil reservoir, follow these steps:
1. Remove the oil cap from the chainsaw.
2. Inspect the oil reservoir for damage. If you see any damage, you will need to replace the oil reservoir.
3. Fill the oil reservoir with oil until it reaches the full mark.
How to Fix a Stihl Chainsaw Auto Oiler
If you have troubleshooted your Stihl chainsaw auto oiler and determined that it is not working properly, you will need to fix it. To fix a Stihl chainsaw auto oiler, you will need to:
1. Replace the oil line.
2. Replace the oil pump.
3. Replace the oil filter.
4. Replace the oil reservoir.
1. Replace the oil line
To replace the oil line, follow these steps:
1. Remove the old oil line.
2. Install the new oil line.
3. Tighten the oil line fittings.
2. Replace the oil pump
To replace the oil pump, follow these steps:
1. Remove the old oil pump.
2. Install the new oil pump.
3. Tighten the oil pump fittings.
3. Replace the oil filter
To replace the oil filter, follow these steps:
1. Remove the old oil filter.
2. Install the new oil filter.
3. Tighten the oil filter.
4. Replace the oil reservoir
To replace the oil reservoir, follow these steps:
FAQs: Stihl Chainsaw Auto Oiler Not Working
Why is my Stihl chainsaw auto oiler not working?
There are a few possible reasons why your Stihl chainsaw auto oiler may not be working. Here are some of the most common causes:
The oiler is not properly adjusted. The oiler needs to be adjusted so that it delivers the correct amount of oil to the chain. If the oiler is not adjusted correctly, it may not be able to keep the chain lubricated properly, which can lead to damage to the chain.
The oiler is clogged. The oiler can become clogged with dirt and debris, which can prevent it from delivering oil to the chain. If the oiler is clogged, you will need to clean it out in order to restore its functionality.
The oiler is broken. In some cases, the oiler may be broken and need to be replaced. If the oiler is broken, you will need to take your chainsaw to a qualified service center for repairs.
How do I adjust the oiler on my Stihl chainsaw?
To adjust the oiler on your Stihl chainsaw, follow these steps:
1. Turn off the chainsaw and allow it to cool down.
2. Locate the oiler adjustment screw. The oiler adjustment screw is usually located on the side of the chainsaw, near the chain bar.
3. Use a small screwdriver to turn the oiler adjustment screw clockwise to increase the oil flow, or counterclockwise to decrease the oil flow.
4. Start the chainsaw and let it run for a few minutes. Check the chain to make sure that it is being properly lubricated. If the chain is not being properly lubricated, adjust the oiler adjustment screw again until the chain is properly lubricated.
How do I clean the oiler on my Stihl chainsaw?
To clean the oiler on your Stihl chainsaw, follow these steps:
1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover. The oiler cover is usually located on the side of the chainsaw, near the chain bar.
3. Use a small brush to clean out the oiler reservoir. Be careful not to damage the oiler pump.
4. Reinstall the oiler cover.
How do I know if my Stihl chainsaw auto oiler is broken?
There are a few signs that your Stihl chainsaw auto oiler may be broken. Here are some of the most common signs:
The chain is not being properly lubricated.
The oiler is leaking oil.
The oiler is making a strange noise.
The oiler is not working at all.
If you notice any of these signs, it is likely that your Stihl chainsaw auto oiler is broken and needs to be replaced.
How do I replace the oiler on my Stihl chainsaw?
To replace the oiler on your Stihl chainsaw, follow these steps:
1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover. The oiler cover is usually located on the side of the chainsaw, near the chain bar.
3. Remove the old oiler. The old oiler is usually held in place by a few screws. Remove the screws and carefully remove the old oiler.
4. Install the new oiler. The new oiler is usually installed in the same way as the old oiler. Make sure that the new oiler is properly seated and that the screws are tight.
5. Reinstall the oiler cover.
Once you have replaced the oiler, start the chainsaw and let it run for a few minutes. Check the chain to make sure that it is being properly lubricated. If the chain is not being properly lubricated, you may need to adjust the oiler adjustment screw.
Next Post You May Like: Stihl Chainsaw Bar Oil Not Working
