Stihl Chainsaw Iiler Not Working

As a chainsaw owner, there are few things more frustrating than having your saw’s chain oiler stop working. Not only is it a safety hazard, but it can also damage your saw if the chain becomes too hot and starts to smoke.

If your Stihl chainsaw chain oiler is not working, there are a few things you can check to try to troubleshoot the problem. In this guide, we’ll walk you through the steps to diagnose and resolve the issue so you can get back to cutting wood in no time.

1. Check the oil level

The first thing you should do is check the oil level in the saw’s reservoir. If the oil level is low, it could be the reason why the oiler is not working. To check the oil level, simply remove the oil cap and look inside. The oil level should be between the MIN and MAX marks on the side of the reservoir.

2. Clean the oil filter

The next thing you should check is the oil filter. The oil filter is located on the bottom of the saw’s reservoir. It’s a small, cylindrical filter that helps to keep dirt and debris out of the oil system. If the oil filter is clogged, it can restrict the flow of oil to the chain and cause the oiler to stop working.

To clean the oil filter, simply remove it from the reservoir and rinse it under warm water. Be sure to dry the filter completely before reinstalling it.

3. Check the oil pump

If the oil level and oil filter are both clear, the next thing you should check is the oil pump. The oil pump is responsible for pumping oil from the reservoir to the chain. If the oil pump is not working properly, it can cause the oiler to stop working.

To check the oil pump, simply start the saw and listen for the oil pump to engage. You should be able to hear a faint whirring sound coming from the pump. If you don’t hear the oil pump engage, it could be a sign that the pump is faulty.

4. Replace the oil pump

If the oil level, oil filter, and oil pump are all clear, the only remaining possibility is that the oiler is faulty. If this is the case, you will need to replace the oiler.

To replace the oiler, simply remove the old oiler from the saw and install the new one. Be sure to follow the instructions that came with the new oiler.

Most Common Reasons Of Stihl Chainsaw Iiler Not Working

Most Common Reasons Of Stihl Chainsaw Iiler Not Working

1. Clogged Fuel Filter

The most common reason for a Stihl chainsaw idler not working is a clogged fuel filter. The fuel filter prevents dirt and debris from entering the carburetor, but it can become clogged over time. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor, which can cause the idler to stop working.

To check if the fuel filter is clogged, remove it from the carburetor and inspect it for dirt and debris. If the filter is clogged, replace it with a new one.

2. Blocked Air Filter

Another common reason for a Stihl chainsaw idler not working is a blocked air filter. The air filter prevents dirt and debris from entering the carburetor, but it can become clogged over time. If the air filter is clogged, it will restrict the flow of air to the carburetor, which can cause the idler to stop working.

To check if the air filter is clogged, remove it from the carburetor and inspect it for dirt and debris. If the filter is clogged, replace it with a new one.

3. Bad Spark Plug

A bad spark plug can also cause a Stihl chainsaw idler not to work. The spark plug ignites the fuel in the carburetor, but if the spark plug is bad, it will not be able to produce a spark. This can prevent the idler from starting or running properly.

To check if the spark plug is bad, remove it from the engine and inspect it for damage. If the spark plug is damaged, replace it with a new one.

4. Carburetor Problems

Carburetor problems can also cause a Stihl chainsaw idler not to work. The carburetor mixes the fuel and air in the correct proportions, but if the carburetor is not adjusted properly, it can cause the idler to stop working.

To check if the carburetor is the problem, clean it and adjust it according to the manufacturer’s instructions. If the carburetor is still not working properly, it may need to be replaced.

5. Engine Problems

Engine problems can also cause a Stihl chainsaw idler not to work. If the engine is not getting enough fuel or air, it will not be able to run properly. Engine problems can be caused by a variety of factors, including a bad fuel pump, a bad fuel line, or a bad head gasket.

To check if the engine is the problem, have it inspected by a qualified technician.

How to Troubleshoot: Stihl Chainsaw Idler Not Working

Symptoms of a Stihl Chainsaw Idler Not Working

There are a few different symptoms that can indicate that the idler on your Stihl chainsaw is not working properly. These include:

The chain is not moving smoothly when you pull the starter rope.
The chain is skipping or jumping when you try to cut through wood.
The chain is getting too tight or too loose.
The chain is coming off the bar.

Causes of a Stihl Chainsaw Idler Not Working

There are a few different things that can cause the idler on your Stihl chainsaw to stop working properly. These include:

A worn-out idler pulley.
A damaged or missing idler spring.
A dirty or clogged idler wheel.
A misaligned idler wheel.

How to Troubleshoot a Stihl Chainsaw Idler Not Working

To troubleshoot a Stihl chainsaw idler not working, you will need to:

1. Inspect the idler pulley for wear and tear.
2. Check the idler spring for damage or missing parts.
3. Clean the idler wheel and housing.
4. Align the idler wheel with the chain.

How to Replace a Stihl Chainsaw Idler

If you determine that the idler on your Stihl chainsaw is not working properly, you will need to replace it. To do this, you will need to:

1. Remove the old idler pulley.
2. Install the new idler pulley.
3. Adjust the idler spring tension.
4. Reinstall the chain and bar.

Preventing Stihl Chainsaw Idler Problems

You can help prevent Stihl chainsaw idler problems by:

Keeping the idler pulley clean and lubricated.
Inspecting the idler pulley regularly for wear and tear.
Replacing the idler pulley as soon as it starts to show signs of wear.

By following these tips, you can help keep your Stihl chainsaw running smoothly and efficiently.

FAQs: Stihl Chainsaw Idler Not Working

Why is my Stihl chainsaw idler not working?

There are a few possible reasons why your Stihl chainsaw idler might not be working. Here are some of the most common causes:

The idler spring is broken or stretched. The idler spring is responsible for keeping the chain tensioned. If the spring is broken or stretched, it will not be able to do its job properly and the chain will become loose.
The idler pulley is worn out. The idler pulley is the part of the chainsaw that the idler spring is attached to. If the pulley is worn out, it will not be able to turn smoothly and the chain will become loose.
The idler arm is bent or damaged. The idler arm is the part of the chainsaw that the idler spring is attached to. If the arm is bent or damaged, it will not be able to move properly and the chain will become loose.
The chain is too tight. If the chain is too tight, it will put too much strain on the idler spring and pulley. This can eventually cause the spring to break or the pulley to wear out.

How do I fix a Stihl chainsaw idler that is not working?

To fix a Stihl chainsaw idler that is not working, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are the steps to take to fix a Stihl chainsaw idler:

1. Inspect the idler spring. If the idler spring is broken or stretched, you will need to replace it. To do this, remove the old spring and install a new one.
2. Inspect the idler pulley. If the idler pulley is worn out, you will need to replace it. To do this, remove the old pulley and install a new one.
3. Inspect the idler arm. If the idler arm is bent or damaged, you will need to replace it. To do this, remove the old arm and install a new one.
4. Adjust the chain tension. If the chain is too tight, you will need to loosen it. To do this, loosen the chain tensioning screw until the chain is loose enough to move freely.

What are the symptoms of a Stihl chainsaw idler that is not working?

There are a few symptoms that can indicate that your Stihl chainsaw idler is not working properly. Here are some of the most common symptoms:

The chain is loose.
The chain is jumping off the guide bar.
The chain is difficult to turn.
The chainsaw is making a strange noise.

What are the dangers of using a Stihl chainsaw with a faulty idler?

Using a Stihl chainsaw with a faulty idler can be dangerous. Here are some of the dangers of using a chainsaw with a faulty idler:

The chain can come off the guide bar and injure you.
The chainsaw can be difficult to control.
The chainsaw can make a strange noise.

How can I prevent my Stihl chainsaw idler from breaking down?

There are a few things you can do to prevent your Stihl chainsaw idler from breaking down. Here are some tips:

Inspect the idler spring, pulley, and arm regularly. Look for signs of wear and tear, such as cracks, rust, or damage. If you see any problems, replace the damaged parts immediately.
Keep the chain tensioned properly. A chain that is too tight can put too much strain on the idler spring and pulley. This can eventually cause the spring to break or the pulley to wear out.
Use the chainsaw properly. Don’t overload the chainsaw or use it for tasks that it is not designed for. This can damage the idler spring and pulley.
Store the chainsaw properly. When you are not using the chainsaw, store it in a cool, dry place. This will help to prevent the idler spring and pulley from rusting or corroding.

Next Post You May Like: Stihl Chainsaw Kickback Not Working