Your SunJoe pressure washer is not working, and you’re frustrated. You’ve tried everything you can think of, but nothing seems to be working. You’re tired of wasting time and money, and you just want to be able to use your pressure washer again.
I know how you feel. I’ve been there myself. That’s why I wrote this troubleshooting guide. In this guide, I’ll walk you through the steps to troubleshoot your SunJoe pressure washer and get it up and running again. So if you’re ready to put an end to your frustration, keep reading!
Why Sunjoe Pressure Washer Not Working
No Water Flow
No water supply:
Make sure that the water supply is turned on and that the pressure washer is connected to the water source.
Blocked water filter:
Remove and clean the water filter.
Clogged nozzle:
Remove and clean the nozzle.
Damaged pump:
The pump may be damaged if it is making strange noises or if it is not pumping water.
Low Water Pressure
Low water supply pressure:
If the water pressure at the faucet is low, the pressure washer will not produce much pressure.
Clogged water filter:
A clogged water filter can restrict water flow and reduce pressure.
Clogged nozzle:
A clogged nozzle can also restrict water flow and reduce pressure.
Damaged pump:
A damaged pump can reduce pressure.
Pressure Washer Won’t Start
No power:
Make sure that the pressure washer is plugged in and that the switch is turned on.
Faulty switch:
The switch may be faulty if it is not turning on the pressure washer.
Damaged motor:
The motor may be damaged if it is not starting.
Pressure Washer Leaking
Loose connections:
Make sure that all of the connections on the pressure washer are tight.
Damaged hose:
The hose may be damaged if it is leaking.
Damaged pump:
The pump may be damaged if it is leaking.
How to Troubleshoot And Fix: SunJoe Pressure Washer Not Working
Symptoms of a SunJoe Pressure Washer Not Working
There are a few different symptoms that can indicate that your SunJoe pressure washer is not working properly. These include:
The pressure washer won’t start
The pressure washer makes a loud whining noise
The pressure washer leaks water
The pressure washer doesn’t produce enough pressure
The pressure washer’s hose is kinked or damaged
Troubleshooting a SunJoe Pressure Washer Not Working
If your SunJoe pressure washer is not working properly, you can try troubleshooting the problem yourself. Here are a few things to check:
Check the power cord:
Make sure that the power cord is plugged in securely and that the power switch is turned on.
Check the water supply:
Make sure that the water supply is turned on and that the water pressure is adequate.
Check the oil level:
If your pressure washer has an oil reservoir, check the oil level and add oil if necessary.
Check the air filter:
If your pressure washer has an air filter, remove the filter and clean it with a clean cloth.
Check the spark plug:
If your pressure washer has a spark plug, remove the plug and inspect it for damage. If the spark plug is damaged, replace it with a new one.
Fixing a SunJoe Pressure Washer Not Working
If you have checked all of the above and your SunJoe pressure washer is still not working, you may need to take it to a qualified repair technician.
Preventing Future Problems
To help prevent future problems with your SunJoe pressure washer, you can take the following steps:
Use the pressure washer according to the manufacturer’s instructions:
Never overfill the oil reservoir:
Clean the air filter regularly:
Replace the spark plug regularly:
Store the pressure washer in a cool, dry place:
By following these tips, you can help extend the life of your SunJoe pressure washer and keep it working properly for years to come.
FAQs: SunJoe Pressure Washer Not Working
Why is my SunJoe pressure washer not working?
There are a few possible reasons why your SunJoe pressure washer might not be working. Here are some of the most common causes and solutions:
The pressure washer is not plugged in properly: Make sure that the power cord is plugged into an outlet and that the outlet is turned on.
The pressure washer is out of water: Check the water tank to make sure that it is full. If the tank is empty, fill it up with water and try again.
The pressure washer is clogged: The pressure washer nozzle may be clogged with dirt or debris. Try cleaning the nozzle with a wire brush or a needle.
The pressure washer is overheating: The pressure washer may be overheating if it is being used for too long or if it is not being used properly. Allow the pressure washer to cool down for a few minutes before using it again.
The pressure washer is broken: If you have tried all of the above solutions and your pressure washer is still not working, it may be broken. Contact SunJoe customer service for assistance.
How do I troubleshoot a SunJoe pressure washer?
If your SunJoe pressure washer is not working, you can troubleshoot the problem by following these steps:
1. Check the power cord: Make sure that the power cord is plugged into an outlet and that the outlet is turned on.
2. Check the water tank: Make sure that the water tank is full. If the tank is empty, fill it up with water and try again.
3. Check the nozzle: The pressure washer nozzle may be clogged with dirt or debris. Try cleaning the nozzle with a wire brush or a needle.
4. Check the pressure washer for overheating: The pressure washer may be overheating if it is being used for too long or if it is not being used properly. Allow the pressure washer to cool down for a few minutes before using it again.
5. Contact SunJoe customer service: If you have tried all of the above solutions and your pressure washer is still not working, it may be broken. Contact SunJoe customer service for assistance.
How do I clean a SunJoe pressure washer?
To clean your SunJoe pressure washer, you will need:
A garden hose
A bucket of water
A mild detergent
A soft-bristled brush
A rag
1. Disconnect the pressure washer from the power outlet:
2. Turn off the water supply to the pressure washer:
3. Empty the water tank:
4. Attach the garden hose to the water inlet on the pressure washer:
5. Turn on the water supply to the pressure washer:
6. Turn on the pressure washer and spray the water hose into the pressure washer until all of the water has been drained from the tank:
7. Mix a solution of mild detergent and water in a bucket:
8. Dip the soft-bristled brush into the detergent solution:
9. Use the brush to clean the exterior of the pressure washer:
10. Rinse the pressure washer with water from the garden hose:
11. Dry the pressure washer with a rag:
How do I store a SunJoe pressure washer?
To store your SunJoe pressure washer, you will need:
A dry, cool place
A cover for the pressure washer
1. Disconnect the pressure washer from the power outlet:
2. Turn off the water supply to the pressure washer:
3. Empty the water tank:
4. Allow the pressure washer to cool down completely:
5. Cover the pressure washer with a cover:
6. Store the pressure washer in a dry, cool place:
What are the benefits of using a SunJoe pressure washer?
There are many benefits to using a SunJoe pressure washer, including:
Powerful cleaning: SunJoe pressure washers generate up to 2,000 PSI of pressure, which is powerful enough to clean even the toughest dirt and grime.
Portability: SunJoe pressure washers are lightweight and compact, making them easy to transport and store.
Convenience: SunJoe pressure washers are easy to use, even for beginners.
Affordability: SunJoe pressure washers are very affordable, making them a great option
Also Read: Titan Pressure Washer Detergent Not Working
