Your SunJoe pressure washer is a powerful tool that can make cleaning your home or yard a breeze. But what happens when the soap dispenser stops working It can be a major inconvenience, especially if you’re in the middle of a project.
In this guide, we’ll troubleshoot the common issue of a . We’ll cover everything from simple fixes like clearing a clog to more complex repairs like replacing a faulty part. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.
Why Sunjoe Pressure Washer Soap Dispenser Not Working
Nozzle Clogged
The most common reason for a SunJoe pressure washer soap dispenser not working is a clogged nozzle. This can happen if the soap becomes too thick or if there is debris in the nozzle. To fix this, you can try to clear the nozzle with a toothpick or needle. If that doesn’t work, you may need to replace the nozzle.
Low Pressure
If the pressure washer is not producing enough pressure, the soap may not be able to reach the nozzle. This can be caused by a number of things, such as a clogged filter, a faulty pump, or a problem with the water supply. To fix this, you will need to identify the cause of the low pressure and take steps to correct it.
Faulty Soap Dispenser
In some cases, the soap dispenser itself may be faulty. This could be due to a broken or worn-out pump, a faulty valve, or a problem with the electrical wiring. If you suspect that the soap dispenser is faulty, you will need to have it repaired or replaced.
Incorrect Soap Type
Not all soaps are compatible with pressure washers. Some soaps are too thick or viscous, and they can clog the nozzle or cause the pressure washer to malfunction. Make sure that you are using a soap that is specifically designed for use with pressure washers.
Incorrect Soap Concentration
The concentration of the soap can also affect the performance of the soap dispenser. If the soap is too concentrated, it can clog the nozzle. If the soap is too dilute, it may not be able to produce enough suds to clean effectively. Make sure that you are using the soap at the correct concentration.
How to Troubleshoot And Fix: sunjoe pressure washer soap dispenser not working
Symptoms of a sunjoe pressure washer soap dispenser not working
There are a few different symptoms that you may experience if your sunjoe pressure washer soap dispenser is not working properly. These include:
The soap dispenser does not dispense any soap when you press the trigger.
The soap dispenser leaks soap.
The soap dispenser makes a hissing sound when you press the trigger.
The soap dispenser is not aligned with the spray gun.
Troubleshooting a sunjoe pressure washer soap dispenser
If you are experiencing any of the symptoms listed above, there are a few things you can check to troubleshoot the problem.
1. Check the soap reservoir:
The first thing you should check is the soap reservoir. Make sure that it is filled with soap and that the lid is tightly closed. If the reservoir is empty, fill it with soap and try again. If the reservoir is full, but the soap dispenser is not dispensing any soap, you may need to clean the soap dispenser.
2. Clean the soap dispenser:
To clean the soap dispenser, you will need to remove it from the pressure washer. Once the soap dispenser is removed, you can use a toothbrush or a small brush to clean out any debris that may be blocking the nozzle. Be sure to rinse the soap dispenser thoroughly with water before reinstalling it.
3. Check the soap hose:
The soap hose is the flexible hose that connects the soap dispenser to the pressure washer. If the soap hose is kinked or damaged, it can prevent the soap from flowing properly. To check the soap hose, inspect it for any kinks or damage. If you find any damage, you will need to replace the soap hose.
4. Check the soap pump:
The soap pump is the part of the pressure washer that actually pumps the soap out of the reservoir and into the spray gun. If the soap pump is not working properly, it can prevent the soap from being dispensed. To check the soap pump, you will need to remove the soap reservoir and the soap hose. Once the soap pump is exposed, you can use a multimeter to check for continuity. If there is no continuity, you will need to replace the soap pump.
5. Check the pressure washer’s settings:
The pressure washer’s settings can also affect the soap dispenser. Make sure that the pressure washer is set to the correct pressure for dispensing soap. If the pressure is too high, it can cause the soap to foam up and not dispense properly. If the pressure is too low, it can prevent the soap from being dispensed at all.
6. Contact sunjoe customer support:
If you have tried all of the troubleshooting steps above and your sunjoe pressure washer soap dispenser is still not working, you can contact sunjoe customer support for help.
How to fix a sunjoe pressure washer soap dispenser
If you have determined that the problem with your sunjoe pressure washer soap dispenser is a specific part, you can fix it by replacing the part. You can purchase replacement parts for your sunjoe pressure washer from sunjoe’s website or from a local hardware store.
To replace a part on your sunjoe pressure washer, you will need to follow the instructions that came with your pressure washer. If you do not have the instructions, you can find them on sunjoe’s website.
Preventing sunjoe pressure washer soap dispenser problems
You can prevent sunjoe pressure washer soap dispenser problems by following these tips:
Keep the soap reservoir filled with soap.
Clean the soap dispenser regularly.
Check the soap hose for kinks or damage.
Check the soap pump for continuity.
Set the pressure washer to the correct pressure for dispensing soap.
By following these tips, you can help to keep your sunjoe pressure washer soap dispenser working properly.
FAQs: SunJoe Pressure Washer Soap Dispenser Not Working
Why isn’t my SunJoe pressure washer soap dispenser working?
There are a few possible reasons why your SunJoe pressure washer soap dispenser might not be working. Here are some of the most common causes and solutions:
The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, try cleaning the dispenser with a degreaser or a vinegar and water solution.
The soap dispenser is not aligned properly: Make sure that the soap dispenser is properly aligned with the spray gun. If it is not, the soap will not be able to flow properly.
The soap dispenser is not turned on: Check to make sure that the soap dispenser is turned on. If it is not, turn it on and try again.
The soap dispenser is empty: Make sure that the soap dispenser is filled with soap. If it is empty, fill it up and try again.
How do I clean my SunJoe pressure washer soap dispenser?
To clean your SunJoe pressure washer soap dispenser, you will need:
A degreaser or a vinegar and water solution
A rag or sponge
A pair of gloves
1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the soap dispenser from the pressure washer.
3. Pour the degreaser or vinegar and water solution into the soap dispenser.
4. Use the rag or sponge to clean the inside of the soap dispenser.
5. Rinse the soap dispenser with water.
6. Dry the soap dispenser with a towel.
7. Reattach the soap dispenser to the pressure washer.
How do I align my SunJoe pressure washer soap dispenser?
To align your SunJoe pressure washer soap dispenser, you will need:
A screwdriver
1. Turn off the pressure washer and disconnect it from the power source.
2. Remove the soap dispenser from the pressure washer.
3. Locate the two screws that hold the soap dispenser in place.
4. Use the screwdriver to loosen the screws.
5. Rotate the soap dispenser until it is properly aligned with the spray gun.
6. Tighten the screws.
7. Reattach the soap dispenser to the pressure washer.
How do I turn on my SunJoe pressure washer soap dispenser?
To turn on your SunJoe pressure washer soap dispenser, you will need:
The pressure washer wand
The soap dispenser
1. Attach the pressure washer wand to the pressure washer.
2. Turn on the pressure washer.
3. Press the soap dispenser button on the pressure washer wand.
The soap will now be dispensed from the soap dispenser.
How do I fill my SunJoe pressure washer soap dispenser?
To fill your SunJoe pressure washer soap dispenser, you will need:
A bottle of soap
The soap dispenser
1. Remove the cap from the soap dispenser.
2. Pour the soap into the soap dispenser until it is full.
3. Replace the cap on the soap dispenser.
The soap dispenser is now filled.
Also Read: Sunjoe Pressure Washer Soap Not Working
