Your Troy-Bilt gas pressure washer is a powerful tool that can make quick work of cleaning your home, driveway, and other outdoor surfaces. But when the pump doesn’t work, it can be a major inconvenience. Not only is it frustrating, but it can also be dangerous if you try to use the pressure washer without the pump working properly.
In this guide, I’ll walk you through the steps to troubleshoot a Troy-Bilt gas pressure washer pump that’s not working. I’ll cover common causes of the problem, as well as how to fix them. By the end of this guide, you’ll be able to get your pressure washer up and running again in no time.
Reasons Why Troy Bilt Gas Powered Pressure Washer Pump Not Working
No Gas
The most common reason for a Troy Bilt gas pressure washer pump not working is that there is no gas in the tank. Make sure the tank is full of gas and that the fuel line is connected properly.
Dirty Fuel Filter
A dirty fuel filter can restrict the flow of gas to the pump, causing it to not work properly. Clean or replace the fuel filter as needed.
Clogged Fuel Line
A clogged fuel line can also prevent gas from reaching the pump. Inspect the fuel line for kinks or obstructions and clear them as needed.
Bad Gas
Old or bad gas can cause problems with the pump. Make sure you are using fresh gas that is at least 87 octane.
Spark Plug Problems
A bad spark plug can prevent the pump from getting the spark it needs to start. Check the spark plug for damage and replace it as needed.
Engine Problems
If the engine is not running properly, it can also cause problems with the pump. Have the engine checked by a qualified technician.
How to Troubleshoot And Fix: Troy Bilt Gas Powered Pressure Washer Pump Not Working
Symptoms of a Pressure Washer Pump Not Working
There are a few different symptoms that can indicate that your Troy Bilt gas powered pressure washer pump is not working properly. These include:
The pressure washer is not generating any pressure.
The pressure washer is generating low pressure.
The pressure washer is generating high pressure but the water flow is weak.
The pressure washer is making strange noises.
The pressure washer is leaking water.
Troubleshooting a Pressure Washer Pump Not Working
If your Troy Bilt gas powered pressure washer pump is not working, you can try troubleshooting the problem yourself. Here are a few things to check:
Check the oil level:
Make sure that the oil level in the pressure washer pump is correct. If the oil level is low, add oil until it reaches the full mark on the dipstick.
Check the air filter:
The air filter can become clogged with dirt and debris, which can restrict airflow to the engine and cause the pressure washer pump to not work properly. Remove the air filter and clean it with a clean rag. If the air filter is damaged, replace it with a new one.
Check the fuel filter:
The fuel filter can become clogged with dirt and debris, which can restrict the flow of fuel to the engine and cause the pressure washer pump to not work properly. Remove the fuel filter and clean it with a clean rag. If the fuel filter is damaged, replace it with a new one.
Check the spark plugs:
The spark plugs can become fouled with carbon deposits, which can cause the engine to misfire and the pressure washer pump to not work properly. Remove the spark plugs and clean them with a spark plug cleaner. If the spark plugs are damaged, replace them with new ones.
Check the fuel line:
The fuel line can become kinked or damaged, which can restrict the flow of fuel to the engine and cause the pressure washer pump to not work properly. Inspect the fuel line for any damage and repair or replace it as needed.
Check the pressure washer pump:
The pressure washer pump can become damaged, which can prevent it from generating pressure. If you suspect that the pressure washer pump is damaged, you should have it serviced or replaced by a qualified technician.
Fixing a Pressure Washer Pump Not Working
Once you have identified the cause of the problem, you can fix the pressure washer pump. Here are a few tips:
If the oil level is low, add oil until it reaches the full mark on the dipstick:
If the air filter is clogged, remove it and clean it with a clean rag. If the air filter is damaged, replace it with a new one:
If the fuel filter is clogged, remove it and clean it with a clean rag. If the fuel filter is damaged, replace it with a new one:
If the spark plugs are fouled, remove them and clean them with a spark plug cleaner. If the spark plugs are damaged, replace them with new ones:
If the fuel line is kinked or damaged, repair or replace it as needed:
If the pressure washer pump is damaged, have it serviced or replaced by a qualified technician:
Preventing Pressure Washer Pump Problems
You can help prevent pressure washer pump problems by following these tips:
Keep the oil level in the pressure washer pump at the full mark on the dipstick:
Change the air filter regularly:
Change the fuel filter regularly:
Inspect the spark plugs regularly and replace them as needed:
Inspect the fuel line regularly and repair or replace it as needed:
Operate the pressure washer pump within its rated capacity:
Do not overload the pressure washer pump:
Do not run the pressure washer pump dry:
Store the pressure washer pump in a cool, dry place:
By following these tips, you can help prevent pressure washer pump problems and keep your pressure washer running smoothly.
Also Read THis: Troy Bilt Pressure Washer Detergent Siphon Not Working
FAQs: Troy Bilt Gas Powered Pressure Washer Pump Not Working
Why is my Troy Bilt pressure washer pump not working?
There are a few possible reasons why your Troy Bilt pressure washer pump may not be working. Here are some of the most common causes:
The pump is not getting enough water: Make sure that the water supply to the pump is turned on and that the hose is not kinked or blocked.
The pump is overheating: If the pump is running for too long without a break, it can overheat and stop working. Allow the pump to cool down for a few minutes before restarting it.
The pump is clogged: The pump may be clogged with dirt or debris, which can prevent it from working properly. Try cleaning the pump according to the manufacturer’s instructions.
The pump is damaged: If the pump is damaged, it will need to be repaired or replaced.
How do I fix a Troy Bilt pressure washer pump that is not working?
To fix a Troy Bilt pressure washer pump that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can take the appropriate steps to fix it. Here are some tips for fixing a Troy Bilt pressure washer pump:
Check the water supply: Make sure that the water supply to the pump is turned on and that the hose is not kinked or blocked.
Allow the pump to cool down: If the pump is overheating, allow it to cool down for a few minutes before restarting it.
Clean the pump: If the pump is clogged, try cleaning it according to the manufacturer’s instructions.
Replace the pump: If the pump is damaged, it will need to be repaired or replaced.
What are the signs of a bad Troy Bilt pressure washer pump?
There are a few signs that can indicate that your Troy Bilt pressure washer pump is bad. These signs include:
The pump is not generating any pressure.
The pump is making a loud noise.
The pump is overheating.
The pump is leaking fluid.
If you notice any of these signs, it is important to have the pump checked by a qualified technician as soon as possible.
How much does it cost to replace a Troy Bilt pressure washer pump?
The cost of replacing a Troy Bilt pressure washer pump can vary depending on the model of the pump and the location of the repair shop. However, you can expect to pay anywhere from $50 to $200 for a new pump.
How can I prevent my Troy Bilt pressure washer pump from breaking down?
There are a few things you can do to prevent your Troy Bilt pressure washer pump from breaking down. These include:
Maintain the pump regularly: This includes cleaning the pump, replacing the oil, and inspecting the pump for signs of wear and tear.
Do not overload the pump: The pump should not be used to clean surfaces that are too large or too dirty.
Do not run the pump dry: The pump should never be run without water in the tank.
Store the pump properly: The pump should be stored in a cool, dry place when it is not in use.
