What Kind Of Gas Do You Put In A Gas Pole Saw?

We may earn commission from qualifying purchases through affiliate links - at no extra cost to you.
Updated in April 2025 | By John

Gas-powered pole saws typically require a specific type of gasoline known as two-stroke or two-cycle fuel. This fuel is a mixture of gasoline and two-stroke oil in a specific ratio, usually 50:1 or 40:1, depending on the manufacturer’s specifications. The specific ratio will be mentioned in the instruction manual or on the product itself. It’s advisable to use high-quality gasoline and the recommended two-stroke oil to maintain the engine’s performance and prevent damage.

What Type Of Gas Used in Gas Pole Saw?

What Is The Best Gas To Use In A Gas Pole Saw?

Most gas pole saws require a mixture of gasoline and oil to operate. It is essential to use the manufacturer’s recommended fuel mixture. A gas pole saw will require a 2-cycle fuel mix of gas and oil in a 40:1 or 50:1 ratio, depending on the saw’s model. To ensure that you get the right fuel, check the manual or the manufacturer’s website for fuel recommendations. Using the wrong fuel mixture can damage the engine or cause accidents when operating the saw.

How Does A Gas Pole Saw Work?

A gas pole saw is a versatile and efficient power tool designed to trim, prune, and cut hard-to-reach branches, limbs, and foliage. This type of pole saw is powered by a gasoline engine, which allows it to deliver excellent cutting performance, maneuverability, and extended reach without relying on an electrical power source.

The gas pole saw consists of several components, including a gas-powered engine, a telescopic pole, a cutting bar, and a chain, which work harmoniously to make tree maintenance a breeze.

The gas engine is responsible for generating power for the saw and is typically a two-stroke engine that requires a mix of gasoline and oil for fuel. Once the engine is started, it drives the sprocket assembly, causing the attached chain to revolve around the cutting bar at a high speed.

The telescopic pole, made of lightweight materials such as aluminum or fiberglass, allows the user to adjust the length of the pole according to the cutting task at hand. This feature enables the user to safely and comfortably reach higher branches without the need for a ladder or climbing equipment.

In using a gas pole saw, one must first start the engine and then extend the pole until the desired length is reached. Users should maintain a firm grip and stance for stability and safety. As the chain revolves around the cutting bar, the sharp teeth on the chain cut through the wood in a continuous motion, eliminating the need for manual sawing.

By employing a gas pole saw, users can experience a powerful and efficient tool that simplifies and expedites tree pruning and trimming tasks while providing them with a higher level of control and safety. 

What Are The Types Of Gas Pole Saw?

Gas pole saws come in different types, such as 2-cycle and 4-cycle engines with varying engine sizes measured in cubic centimeters (cc). Some gas pole saws have an extension pole and adjustable chains to reach higher branches. Others have a detachable section that allows you to convert it into a shorter chainsaw for ground-level cutting.

What Are The Benefits Of Using A Gas Pole Saw?

Using a gas pole saw has several benefits, such as the ability to cut higher branches and limbs without using a ladder or climbing a tree. It is also great for trimming smaller branches and clearing dead parts of trees.

The engine’s power ensures that the saw can tackle tougher cuts that regular saws may struggle to make. Additionally, a gas pole saw is a powerful tool that can cut through thick branches much faster than hand saws.

What Happens If You Put The Wrong Gas In Your Gas Pole Saw?

If you put the wrong gas in your gas pole saw, it can cause the engine to overheat or malfunction, leading to potential accidents and injuries. The wrong fuel mixture can cause engine damage that is expensive to repair or even irreparable.

How Much Gas Does A Gas Pole Saw Use?

The amount of gas a gas pole saw uses depends on the saw’s size, engine capacity, and how frequently you use it. Typically, a small gas pole saw can use 8-10 ounces of fuel for every hour it operates, while a larger saw can use up to 20-30 ounces of fuel per hour.

How To Use A Gas Pole Saw?

What Safety Precautions Should You Consider When Using A Gas Pole Saw?

Before operating a gas pole saw, you must wear protective gear, such as safety goggles, gloves, and a helmet. You should also ensure that the saw is well maintained, with a sharp chain that is properly tensioned. When working with a gas pole saw, be sure that you have a secure footing and avoid using it on a ladder or other unstable surfaces. Be sure to follow the manufacturer’s instructions when working with your saw.

How To Start A Gas Pole Saw?

To start a gas pole saw, follow the manufacturer’s instructions for your saw’s specific model. Typically, you will need to check the fuel and oil levels, set the choke, and pull the cord while maintaining a secure grip on the saw. Some models may have an electric starter or a primer bulb that you need to push several times to start the engine.

How To Stop A Gas Pole Saw?

To stop a gas pole saw, you need to release the throttle trigger to slow down the chain, then turn off the engine using the kill switch or ignition button. Finally, remove the spark plug cap to make sure it is securely fastened and store your gas pole saw in a safe place.

How To Maintain A Gas Pole Saw?

How To Clean A Gas Pole Saw?

To clean a gas pole saw, you need to remove the chain and bar, clean them with a brush or cloth, then clean the spark plug and air filter. Ensure that the engine compartment is free of debris and check the fuel and oil lines for cracks and leaks. You should also check the chain tension and sharpen the chain when necessary.

How To Store A Gas Pole Saw?

When storing a gas pole saw, you should ensure that it is clean and dry, and store it in a secure, dry location away from heat or direct sunlight. Before storage, drain any excess fuel and oil from the saw, then store it with the bar and chain disassembled.

What To Do If Your Gas Pole Saw Won’t Start?

If your gas pole saw won’t start, check the fuel and oil levels, clean the spark plug, air filter, and carburetor, and ensure that the chain tension is correct. Check for any visible damage to the saw, such as a damaged bar or chain, and replace any defective parts immediately.

Where To Buy A Gas Pole Saw?

What To Consider When Buying A Gas Pole Saw?

When buying a gas pole saw, you should consider factors such as the saw’s engine size, extension length, weight, and maximum reach. You should also consider the warranty and customer reviews of the saw’s performance, reliability, and ease of use. Some of the best gas pole saws on the market include the Stihl HT 131 and Husqvarna 525PT5S.

About The Author

I am John, and I am the creator of this website. I have been in the woodworking industry for about 5 years. I developed my passion for DIY projects around the house when I was in high school. I have discovered a new appreciation for those who have the experience to pass along their expertise. They know what works best and are able to help others. I am proud to be among them.

Leave a Comment