Your new chainsaw won’t start Don’t panic! There are a few common reasons why a chainsaw might not start, and most of them are easy to fix. In this blog post, I’ll walk you through the steps to troubleshoot your chainsaw and get it up and running again.
Why Won’T My New Chainsaw Start
There are a few reasons why your new chainsaw might not start. Here are the most common:
The chain brake is engaged:
Make sure the chain brake is disengaged before trying to start the chainsaw.
The choke is on:
The choke is used to start a cold engine. If the engine is already warm, you should turn the choke off.
The fuel tank is empty:
Make sure the fuel tank is full of fresh gasoline.
The spark plug is fouled:
Remove the spark plug and clean it with a spark plug cleaner.
The air filter is dirty:
Remove the air filter and clean it with a clean rag.
Why Won’t My New Chainsaw Start?
Possible Causes
There are a few possible reasons why your new chainsaw won’t start. Here are some of the most common:
The chainsaw is not getting enough fuel:
Make sure that the fuel tank is full and that the fuel line is clear.
The spark plug is not firing:
Check the spark plug to make sure that it is in good condition and that the gap is set correctly.
The air filter is dirty:
A dirty air filter can restrict airflow to the engine, causing it to stall. Clean the air filter according to the manufacturer’s instructions.
The carburetor is not adjusted properly:
The carburetor controls the amount of fuel and air that is mixed together to create the fuel-air mixture that the engine needs to run. If the carburetor is not adjusted properly, the engine will not run properly.
The engine is flooded:
If the engine is flooded, it will not start because there is too much fuel in the cylinder. To clear the flood, turn the chainsaw off and wait a few minutes. Then, open the choke and pull the starter rope several times until the engine starts.
Troubleshooting Tips
If you have checked all of the possible causes and your chainsaw still won’t start, you may need to take it to a qualified chainsaw repair technician.
Here are some troubleshooting tips that may help you get your chainsaw started:
Try a different spark plug:
If you are not sure if the spark plug is in good condition, try replacing it with a new one.
Clean the air filter:
A dirty air filter can restrict airflow to the engine, causing it to stall. Clean the air filter according to the manufacturer’s instructions.
Adjust the carburetor:
If the carburetor is not adjusted properly, the engine will not run properly. You can adjust the carburetor yourself or take it to a qualified chainsaw repair technician.
Clear the flood:
If the engine is flooded, it will not start because there is too much fuel in the cylinder. To clear the flood, turn the chainsaw off and wait a few minutes. Then, open the choke and pull the starter rope several times until the engine starts.
Preventative Maintenance
The best way to avoid problems with your chainsaw is to perform regular preventative maintenance. Here are a few things you can do to keep your chainsaw running smoothly:
Check the fuel level regularly:
Make sure that the fuel tank is full and that the fuel line is clear.
Clean the air filter regularly:
A dirty air filter can restrict airflow to the engine, causing it to stall. Clean the air filter according to the manufacturer’s instructions.
Adjust the carburetor regularly:
The carburetor controls the amount of fuel and air that is mixed together to create the fuel-air mixture that the engine needs to run. If the carburetor is not adjusted properly, the engine will not run properly.
Store your chainsaw properly:
When you are not using your chainsaw, store it in a cool, dry place. This will help to prevent the engine from corroding and the fuel from evaporating.
Also Read THis: Why Won’T My Poulan Chainsaw Start
FAQs: Why won’t my new chainsaw start?
Why won’t my chainsaw start?
There are a few possible reasons why your chainsaw won’t start. Here are some of the most common:
The chainsaw is not getting enough fuel: Make sure that the fuel tank is full and that the fuel line is clear of obstructions.
The chainsaw is not getting enough air: Check the air filter to make sure that it is clean and free of debris.
The spark plug is not firing: Remove the spark plug and check to make sure that it is in good condition and that the electrodes are clean.
The carburetor is not adjusted properly: If the carburetor is not adjusted properly, the chainsaw may not get the correct mixture of fuel and air.
The chainsaw is damaged: If the chainsaw is damaged, it may not start.
How do I fix a chainsaw that won’t start?
Once you have determined the cause of the problem, you can fix the chainsaw by following these steps:
Check the fuel tank and fuel line: Make sure that the fuel tank is full and that the fuel line is clear of obstructions. If the fuel tank is empty, fill it with fresh fuel. If the fuel line is obstructed, clear it out with a small wire or needle.
Check the air filter: Remove the air filter and check to make sure that it is clean and free of debris. If the air filter is dirty, clean it with a clean cloth or replace it with a new one.
Check the spark plug: Remove the spark plug and check to make sure that it is in good condition and that the electrodes are clean. If the spark plug is damaged, replace it with a new one.
Adjust the carburetor: If the carburetor is not adjusted properly, the chainsaw may not get the correct mixture of fuel and air. You can adjust the carburetor by turning the idle screw and the high-speed screw.
Repair the chainsaw: If the chainsaw is damaged, you will need to take it to a qualified repair shop for repairs.
What should I do if my chainsaw still won’t start?
If you have tried all of the above steps and your chainsaw still won’t start, you should take it to a qualified repair shop for repairs.
How can I prevent my chainsaw from not starting?
There are a few things you can do to prevent your chainsaw from not starting:
Keep the fuel tank full: A full fuel tank will help to prevent the carburetor from becoming flooded.
Clean the air filter regularly: A dirty air filter will restrict airflow and make it difficult for the chainsaw to start.
Check the spark plug regularly: A damaged spark plug can prevent the chainsaw from starting.
Adjust the carburetor regularly: A properly adjusted carburetor will help the chainsaw to start properly.
Store the chainsaw properly: When not in use, store the chainsaw in a cool, dry place.
By following these tips, you can help to prevent your chainsaw from not starting.
