Do you have a 9.5 in 7 amp electric pole saw that’s not working You’re not alone. This is a common problem, but there’s a simple fix. In this blog post, I’ll show you how to troubleshoot and fix an electric pole saw that’s not pumping oil. I’ll also provide some tips on how to prevent this problem from happening in the future. So if your pole saw is giving you trouble, read on for help!
So 9.5 In 7 Amp Electric Pole Saw Oil Not Working
There are a few reasons why the oil might not be working in your 9.5 in. 7 amp electric pole saw.
The oil level may be low:
Check the oil level and add oil as needed.
The oil filter may be clogged:
Clean or replace the oil filter.
The oil pump may be faulty:
Replace the oil pump.
9.5 in 7 amp electric pole saw oil not working
Symptoms
There are a few symptoms that may indicate that the oil in your 9.5 in 7 amp electric pole saw is not working properly. These include:
The saw is difficult to start.
The saw makes a loud noise when it is running.
The saw’s chain is not cutting through wood as well as it used to.
The saw’s chain is smoking.
The saw’s chain is getting hot.
Causes
There are a few different things that could cause the oil in your 9.5 in 7 amp electric pole saw to stop working properly. These include:
Low oil level:
If the oil level in your saw is too low, the saw will not be able to lubricate the chain properly. This can lead to the chain becoming hot and smoking, and it can also make the saw difficult to start.
Dirty oil:
If the oil in your saw is dirty, it will not be able to lubricate the chain properly. This can also lead to the chain becoming hot and smoking, and it can also make the saw difficult to start.
Clogged oil filter:
If the oil filter in your saw is clogged, it will not be able to filter the oil properly. This can lead to the oil becoming dirty and unable to lubricate the chain properly.
Faulty oil pump:
If the oil pump in your saw is faulty, it will not be able to pump oil to the chain properly. This can lead to the chain becoming dry and overheating.
Solutions
If you are experiencing any of the symptoms listed above, you should first check the oil level in your saw. If the oil level is low, you should add oil to the saw until the level is up to the full mark. If the oil level is not the problem, you should then check the oil filter. If the oil filter is clogged, you should clean or replace it. If the oil filter is not the problem, you should then check the oil pump. If the oil pump is faulty, you should have it repaired or replaced.
Prevention
The best way to prevent problems with the oil in your 9.5 in 7 amp electric pole saw is to keep the oil level topped up and to change the oil regularly. You should also make sure to clean the oil filter regularly. By following these simple tips, you can help to ensure that your saw runs smoothly and efficiently.
Also Read THis: Automaticoil Pump In Electric Pole Chain Saw Is Not Working
FAQs: 9.5 in 7 amp electric pole saw oil not working
Why is the oil not working in my 9.5 in 7 amp electric pole saw?
There are a few possible reasons why the oil may not be working in your 9.5 in 7 amp electric pole saw.
The oil level is low: Check the oil level in the saw and add more oil if necessary.
The oil is the wrong type: Make sure you are using the correct type of oil for your saw.
The oil filter is clogged: Clean or replace the oil filter if it is clogged.
The oil pump is not working properly: If the oil pump is not working properly, it will not be able to circulate oil through the saw. You may need to have the saw serviced or repaired.
What should I do if the oil is not working in my 9.5 in 7 amp electric pole saw?
If the oil is not working in your 9.5 in 7 amp electric pole saw, you should first check the oil level. If the oil level is low, add more oil. If the oil level is correct, you should check the type of oil you are using. Make sure you are using the correct type of oil for your saw. If you are using the correct type of oil, you should check the oil filter. Clean or replace the oil filter if it is clogged. If the oil filter is not clogged, you should check the oil pump. If the oil pump is not working properly, you may need to have the saw serviced or repaired.
What is the correct type of oil to use in a 9.5 in 7 amp electric pole saw?
The correct type of oil to use in a 9.5 in 7 amp electric pole saw is 10W-30. This type of oil is designed for use in small engines and will provide the best lubrication for your saw.
How often should I change the oil in my 9.5 in 7 amp electric pole saw?
You should change the oil in your 9.5 in 7 amp electric pole saw every 25 hours of use. This will help to keep your saw running smoothly and prevent damage to the engine.
What are the signs that the oil in my 9.5 in 7 amp electric pole saw needs to be changed?
There are a few signs that the oil in your 9.5 in 7 amp electric pole saw needs to be changed.
The oil level is low: Check the oil level in the saw and add more oil if necessary.
The oil is dark or dirty: This is a sign that the oil is contaminated and needs to be changed.
The saw is running rough or making strange noises: This could be a sign that the oil is not lubricating the engine properly and needs to be changed.
The saw is overheating: This could be a sign that the oil is not cooling the engine properly and needs to be changed.
