John

Stihl hedge trimmer won’t start. Checked fuel, spark plug, air filter. Cleaned spark plug, primed, still won’t start. Possible causes

Faulty spark plug
Clogged air filter
Low fuel
Flooded engine

The Ego hedge trimmer does not work with any size battery. It requires a 2.5 Ah battery.

No, the Worx 20v hedge trimmer does not work with a 40v battery.

Echo 2 stroke hedge trimmer won’t rev when choked. Check fuel, spark plug, air filter, and carburetor. If problem persists, contact a qualified technician.

The following excerpt is from a blog post about Echo hedge trimmer blades that won’t move

If your Echo hedge trimmer blades won’t move, there are a few things you can check. First, make sure that the trimmer is turned on and that the blade switch is engaged. If the blades still don’t move, check the drive belt to make sure that it’s not damaged or broken. If the belt is fine, you may need to lubricate the trimmer’s gearbox.

If the blades on your Echo HC-152 hedge trimmer won’t move, it may be due to a stuck blade brake. To release the brake, press the red button on the side of the trimmer. If the blades still won’t move, you may need to clean or replace the brake.

Echo Hedge Trimmer Won’t Cut

If your Echo hedge trimmer won’t cut, here are a few things to check

Make sure the blade is sharp.
Check the oil level and add oil if needed.
Clean the air filter.
Inspect the trimmer for any damage.
If the trimmer is still not cutting, take it to a qualified service center.

Poulon hedge trimmer blades won’t move because the locking pin is engaged. To disengage the pin, press the button on the side of the trimmer and slide the pin out.

If the Echo 1500 hedge trimmer blades won’t move, it is likely that the trimmer is overheating. To fix this, turn off the trimmer and allow it to cool down. Once the trimmer has cooled down, try starting it again. If the blades still won’t move, you may need to have the trimmer serviced.

Hedge trimmer keeps stopping when cutting thick branches due to jammed blade. Hedge trimmer keeps stopping when cutting thick branches due to jammed blade.