John

In this YouTube video, the Echo PAS225 gas hedge trimmer stops working after a few minutes of use. The video troubleshoots the issue and finds that the problem is with the carburetor.

Yardworks hedge trimmer stopped working after using it for a few months.

Tried to troubleshoot but could not find the issue.

May need to be repaired or replaced.

There are a few reasons why your Stihl hedge trimmer might not be starting.
The spark plug is dirty or fouled. Clean or replace the spark plug.
The air filter is dirty. Clean or replace the air filter.
The fuel filter is clogged. Clean or replace the fuel filter.
The carburetor is out of adjustment. Adjust the carburetor.
The engine is flooded. Turn the engine off and let it sit for a few minutes. Then try starting it again.

Weed eater hedge trimmer won’t start

Check the fuel. Is there enough gas in the tank? Is the gas fresh?

Check the spark plug. Is it clean and properly gapped?

Check the air filter. Is it dirty?

Check the choke. Is it in the right position?

Try starting the trimmer again.

Electric hedge trimmer keeps cutting out

Possible causes
Low battery
Overloaded motor
Faulty switch
Damaged cord

The electric hedge trimmer keeps stopping because the motor is overheating. To fix this, unplug the trimmer and allow it to cool down for 10 minutes. Then, clean the air vents and fan with a dry cloth. If the trimmer continues to stop, replace the carbon brushes.

Hedge trimmer keeps cutting out due to a faulty switch. Hedge trimmer keeps cutting out.

Possible causes

Faulty switch
Loose connection
Worn-out parts

Hedge trimmer blades won’t move

Check that the trimmer is turned on.
Make sure that the blades are not jammed with debris.
Clean the blades with a wire brush if they are dirty.
Check the trimmer’s oil level and add oil if necessary.
If the blades still won’t move, the trimmer may need to be serviced.

Hedge trimmer blades won’t move

– Check the power switch is turned on.
– Check the trimmer is plugged in.
– Check the trimmer’s blade oil level.
– Clean the trimmer’s blade with a wire brush.
– Replace the trimmer’s blade if it is damaged.