Do you own a Briggs and Stratton pressure washer that isn’t working If so, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there is a solution. In this troubleshooting guide, I will walk you through the steps to identify and fix the problem. By the end of this guide, you’ll be able to get your pressure washer up and running again in no time.
Hook
Imagine being able to clean your driveway, deck, or siding without having to break a sweat. With a working pressure washer, you can do just that. So if your Briggs and Stratton pressure washer isn’t working, don’t despair. This guide will help you get it up and running again in no time.
Why Briggs And Stratton Pressure Washer Not Working
No Power
The power cord is not plugged in or is not plugged in all the way.
The outlet is not working.
The pressure washer’s circuit breaker is tripped.
The pressure washer’s thermal overload protector has tripped.
The pressure washer’s pump is not working.
No Water
The water supply hose is not connected to the pressure washer or is not connected tightly.
The water supply hose is kinked or blocked.
The water pressure is too low.
The pressure washer’s water filter is clogged.
The pressure washer’s pump is not working.
Low Pressure
The water supply pressure is too low.
The pressure washer’s water filter is clogged.
The pressure washer’s pump is not working properly.
The pressure washer’s pressure regulator is not set correctly.
High Pressure
The pressure washer’s pressure regulator is not set correctly.
The pressure washer’s pump is not working properly.
The pressure washer’s hose is kinked or blocked.
The pressure washer’s nozzle is clogged.
How to Troubleshoot: Briggs and Stratton Pressure Washer Not Working
Symptoms
There are a few different symptoms that can indicate that your Briggs and Stratton pressure washer is not working properly. These include:
The pressure washer won’t start
The pressure washer starts but won’t build pressure
The pressure washer leaks
The pressure washer makes strange noises
The pressure washer’s pump overheats
Troubleshooting
If your Briggs and Stratton pressure washer is not working properly, you can troubleshoot the problem by following these steps:
1. Check the power supply:
Make sure that the pressure washer is plugged into an outlet that is working properly.
2. Check the oil level:
The pressure washer should have at least 1/2 inch of oil in the crankcase. If the oil level is low, add oil to the crankcase until it reaches the full mark.3. Check the air filter:
The air filter should be clean and free of debris. If the air filter is dirty, replace it with a new one.
4. Check the spark plug:
The spark plug should be clean and gapped properly. If the spark plug is dirty or damaged, replace it with a new one.
5. Check the fuel filter:
The fuel filter should be clean and free of debris. If the fuel filter is dirty, replace it with a new one.
6. Check the fuel line:
The fuel line should be free of kinks or leaks. If the fuel line is damaged, replace it with a new one.
7. Check the pump:
The pump may be damaged if it is making strange noises or if it is overheating. If you suspect that the pump is damaged, take the pressure washer to a qualified service center for repairs.
Preventative Maintenance
You can help prevent problems with your Briggs and Stratton pressure washer by following these tips:
Keep the pressure washer clean:
Clean the pressure washer after each use to prevent dirt and debris from building up.
Inspect the pressure washer regularly:
Inspect the pressure washer regularly for signs of wear and tear. Replace worn or damaged parts as needed.
Store the pressure washer properly:
Store the pressure washer in a cool, dry place when it is not in use.
By following these tips, you can help keep your Briggs and Stratton pressure washer running smoothly for many years to come.
Also Read: Briggs And Stratton Pressure Washer Soap Not Working
FAQs: Briggs and Stratton Pressure Washer Not Working
Why is my Briggs and Stratton pressure washer not working?
There are a few possible reasons why your Briggs and Stratton pressure washer might not be working. Here are some of the most common causes:
The engine is not getting fuel: Make sure that the fuel tank is full and that the fuel line is not clogged.
The engine is not getting spark: Check the spark plug and make sure that it is properly installed and that the gap is correct.
The engine is overheating: Allow the engine to cool down and then check the coolant level.
The pressure washer is not generating enough pressure: Check the pressure washer’s pump and make sure that it is working properly.
The pressure washer is not spraying water: Check the water hose and make sure that it is not kinked or clogged.
How do I fix a Briggs and Stratton pressure washer that is not working?
Once you have identified the cause of the problem, you can fix your Briggs and Stratton pressure washer by following these steps:
If the engine is not getting fuel, make sure that the fuel tank is full and that the fuel line is not clogged. You can also try cleaning the carburetor.
If the engine is not getting spark, check the spark plug and make sure that it is properly installed and that the gap is correct. You can also try replacing the spark plug.
If the engine is overheating, allow the engine to cool down and then check the coolant level. You may also need to replace the thermostat or water pump.
If the pressure washer is not generating enough pressure, check the pressure washer’s pump and make sure that it is working properly. You may need to replace the pump or the pressure washer’s seals.
If the pressure washer is not spraying water, check the water hose and make sure that it is not kinked or clogged. You may also need to replace the water filter.
What are the safety precautions I should take when using a Briggs and Stratton pressure washer?
When using a Briggs and Stratton pressure washer, it is important to take the following safety precautions:
Wear safety glasses to protect your eyes from flying debris:
Wear gloves to protect your hands from the water and chemicals:
Stand on a stable surface and keep a firm grip on the pressure washer:
Do not point the pressure washer at people or animals:
Do not use the pressure washer near flammable materials:
Be careful not to spray the pressure washer on electrical equipment:
What are the maintenance tips for a Briggs and Stratton pressure washer?
To keep your Briggs and Stratton pressure washer in good working order, it is important to follow these maintenance tips:
Regularly check the oil level and add oil as needed:
Change the oil and filter every 50 hours of use:
Clean the air filter every 25 hours of use:
Inspect the spark plug and replace it as needed:
Flush the water system after each use:
Where can I get help with my Briggs and Stratton pressure washer?
If you are having trouble with your Briggs and Stratton pressure washer, you can get help from the following sources:
The Briggs and Stratton website has a variety of resources, including a troubleshooting guide, a parts catalog, and a customer service phone number.
Your local Briggs and Stratton dealer can provide you with service and repair for your pressure washer.
A qualified repair technician can also help you diagnose and fix your pressure washer.
